If the call to net_send_data() fails, for example if the forwading
interface is down, then the pkt will leak. The reference taken by
net_pkt_shallow_clone() will never be released. Fix the problem
by dropping the rerefence count in the error path.
Signed-off-by: Andriy Gelman <andriy.gelman@gmail.com>
If the device was not paired, the conn->le.keys is NULL, so
conn->le.keys will cause NULL pointer dereference.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Move from using Kconfig OSDP_UART_DEV_NAME to a devicetree
chosen property ("zephyr,osdp-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Changed the integration platform for the osdp samples to
stm32_min_dev_black as it already has zephyr,osdp-uart set.
Signed-off-by: Kumar Gala <galak@kernel.org>
Starting the pasive scanner so host can resolve addresses
shouldn't be nessesary when the resolving list is empty.
Signed-off-by: Martin Tverdal <martin.tverdal@nordicsemi.no>
The `name` parameter is redundant, as the `name` and `name-ad` options are
available already as `adv-create` and `adv-param` command parameters.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Add function which formats a logging string from input parameters
and not from logging message. This function is more flexible since
it does not require data to be placed in the log message.
Converted a function for message processing to used this new function
internally.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Before this, on flashes with a write alignment greater than one, the
padding bytes had no defined value.
The effect of this non-deterministic code made it hard(er) to verify
data written by FCB.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Change doc of CONFIG_BT_PRIVACY to explicitly say it's needed for both
generating and resolving RPAs.
Disable host-based RPA resolution in `bt_conn_le_create` when
!CONFIG_BT_PRIVACY.
Update doc of `bt_conn_le_create` to document that CONFIG_BT_PRIVACY is
a requirement for resolving RPAs. Also explictly say that this function
will resolve private identities. Also explain the expected effect of
Network Privacy on this function.
Reduce coupling to `bt_le_create_conn_ext` and
`bt_le_create_conn_legacy` in `bt_conn_le_create` by just use
`resp_addr` when it's set, instead of "knowing" when it had been set.
The alternative would be to also update `bt_le_create_conn_ext` and
`bt_le_create_conn_legacy` to have `(IS_ENABLED(CONFIG_BT_PRIVACY) &&
(!bt_dev.le.rl_size || bt_dev.le.rl_entries > bt_dev.le.rl_size))`
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Move from using Kconfig TRACING_BACKEND_UART_NAME to a devicetree
chosen property ("zephyr,tracing-uart"). This is similar to a number
of other functions like "zephyr,shell-uart" or "zephyr,bt-uart".
Signed-off-by: Kumar Gala <galak@kernel.org>
Rework the <BUS>_emul_register calls to not pass the name param. The
name param is only used for logging and we can get it from the
struct <BUS>_emul instead.
Signed-off-by: Kumar Gala <galak@kernel.org>
The bus_label is not used and is using DT_INST_BUS_LABEL which is
now deprecated and thus causes an error when running CI.
Signed-off-by: Kumar Gala <galak@kernel.org>
DT nodes aren't guaranteed to define a label property. But emulated bus
controllers currently make use of this property to dispatch to the
associated emulator.
Have emulated bus controllers use DEVICE_DT_GET(node_id) to dispatch to
right target peripheral emulator. This also change makes emul_get_binding
and device_get_binding synonymous in behavior with respect to their
parameters.
This also strictly enforces a 1:1 correspondence between invocations of
DEVICE_DT_DEFINE and EMUL_DEFINE.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Some paramaters in prior emulators have historically referred to instances
of struct emul as "emulator" or "emul". The proper parameter name for this
type is "target" as it designates the struct emul instance is the emul
bus (e.g. emul_i2c) controller's target peripheral for dispatch.
Do a small refactor renaming some of these parameters to "target".
TEST=twister on accel, espi, and eeprom drivers tests
Signed-off-by: Aaron Massey <aaronmassey@google.com>
In several locations of the emulator code there are unused function
arguments that were never caught.
Declare these as unused or remove the unused function parameters entirely.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Allow emulator creators to write an init function that can be used
across multiple busses so as to reduce the boilerplate and cognitive
load in creating an emulator.
Part of this change includes allowing access to the emul struct from a
field in a {bus}_struct api (e.g. i2c_struct), which removes the need for
sporadic usages of CONTAINER_OF to access the emul struct.
Overall, this change simplifies and reduces the amount of boilerplate
code to get a device emulator up and running, thus reducing excise work
to writing tests.
TEST=twister on accel,espi, and eeprom drivers tests
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Run clang-format on all files touched by improved emulator API pull-request
that allowed access to the target device emulator from its bus api without
CONTAINER_OF usage.
drivers/i2c/i2c_emul.c
drivers/spi/spi_emul.c
include/zephyr/drivers/emul.h
include/zephyr/drivers/espi_emul.h
include/zephyr/drivers/i2c_emul.h
include/zephyr/drivers/spi_emul.h
subsys/emul/emul.c
subsys/emul/emul_bmi160.c
subsys/emul/espi/emul_espi_host.c
subsys/emul/i2c/emul_atmel_at24.c
TEST=twister on accel,espi, and eeprom drivers tests
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The unicast client will now read the PACS location value
during the discovery procedure, as well as subscribing to
it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The code in unicast_client.c was guarded by
CONFIG_BT_AUDIO_UNICAST_CLIENT but the file is only
compiled if CONFIG_BT_AUDIO_UNICAST_CLIENT is enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the cache from "cache" to "pac_cache" to avoid
name clashes with local cache variables.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added possibility to enforce that a LE Secure Connection is required
for reading and writing characteristics, i.e. providing a more fine
grained check that allows services that requires secure connection
to co-exists with those that doesn't.
Signed-off-by: Lars Knudsen <larsgk@gmail.com>
Signed-off-by: Fredrik Danebjer <fredrik@danebjer.com>
Extend the `vcs init` command with optional parameters to set the
initial VCS state including volume level, mute state and step size.
This is needed to pass qualification test cases listed below:
VCS/SR/CP/BV-01-C,
VCS/SR/CP/BV-02-C,
VCS/SR/CP/BV-02-C,
VCS/SR/CP/BV-04-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Shell command "bt init sync" now correctly enables Bluetooth
synchronously, and "bt init" enables Bluetooth asynchronously.
Fixes#47860.
Signed-off-by: Andreas Rudolf <andreas.rudolf@husqvarnagroup.com>
The sys_snode_t nodes are used internally, and we use the
convention of the "_" prefix to indicate that this is
an internally used value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify the broadcast sink to use a list of streams instead
of an array. This removes the requirement that the array
of stream pointers shall be static, and makes the
broadcast sink API and implementation more similar
to the unicast group and broadcast source.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Modify from array to list. The list approach is easily
implemented as it is used for the unicast groups, and
using the list approach instead of an array does not
require the array to be static.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
There is a potential, corner case scenario, where a deadlock can occur
between TCP and socket layers, when both ends of the connection transmit
data.
The scenario is as follows:
* Both ends of the connection transmit data,
* Zephyr side send() call gets blocked due to filing the TX window
* The next incoming packet is data packet, not updating the RX window
on the peer side or acknowledging new data. The TCP layer will
attepmt to notify the new data to the socket layer, by calling the
registered callback. This will block the RX thread processing the TCP
layer, as the socket mutex is already acquired by the blocked send()
call.
* No further packets are processed until the socket mutex is freed,
which does not happen as the only way to unblock send() is process
a new ACK, either updating window size or a acknowledging data.
The connection stalls until send() times out.
The deadlock is not permament, as both threads get unlocked once send()
times out. It effectively breaks the active connection though.
Fix this, by unlocking the socket mutex for the time the send() call is
idle. Once the TCP layer notifies that the window is available again,
the mutex is acquired back.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Documentation now includes:
- How to create a test suite
- How to use predicates
- How to use setup/before/after/teardown
- How to use test rules
- Direct people to use FFF instead of ztest mock
Fixes#47420
Signed-off-by: Yuval Peress <peress@google.com>
This fixes bt_pacs_context_available so that it gets available
contexts from capabilities that hold the value.
This removes redundant available_context that were held
(and not updated) in pacs.c.
Fixes: HAP/HA/STR/BV-01-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This API now becomes a low-level API, in the sense that it should only be
used if the app developer knows what he is doing and wants to ensure a
ATT_MULTIPLE_HANDLE_VALUE_NTF PDU goes on-air.
For the other 99% of use cases, `bt_gatt_notify` should instead be used, as
it will automatically upgrade to ATT_MULTIPLE_HANDLE_VALUE_NTF when
possible.
One can disable the batching of notifications when using `bt_gatt_notify`
by setting CONFIG_BT_GATT_NOTIFY_MULTIPLE_FLUSH_MS=0 .
This API doesn't support lookup by UUID any more.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
In the case a call to `bt_gatt_notify_cb` gets its attribute data
batched with others to form an ATT_MULTIPLE_HANDLE_VALUE_NTF PDU, the
application developer would still expect one callback per API call.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Sending ATT_MULTIPLE_HANDLE_VALUE_NTF containing only one handle doesn't
seem forbidden by the spec, but peers might find it unexpected.
This change morphs a ATT_MULTIPLE_HANDLE_VALUE_NTF into a
ATT_HANDLE_VALUE_NTF right before sending it, if it detects this
condition.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The intended behavior is that calling `gatt_notify_mult` in a loop will
result in a `BT_ATT_OP_NOTIFY_MULT` containing all the handles and their
data.
What was happening instead is that the caller thread was a lower priority
than the system workqueue, and thus multiple `BT_ATT_OP_NOTIFY_MULT` PDUs
were being sent over the air instead of one.
Submitting the work item with a delay side-steps this particular issue.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Created the variable CONFIG_LWM2M_SERVER_DEFAULT_SSID to be
the default ssid when not using bootstrap. Needed for access control.
Signed-off-by: Ola Tangen Kulseng <ola.kulseng@nordicsemi.no>
Implementation of the access control object. Core object (obj_id 2).
If used without bootstrap, the default value in
CONFIG_LWM2M_SERVER_DEFAULT_SSID will be used as access control owner.
Enable/disable ac control with CONFIG_LWM2M_ACCESS_CONTROL_ENABLE.
Signed-off-by: Ola Tangen Kulseng <ola.kulseng@nordicsemi.no>
`bt_gatt_unsubscribe` was pending a write to the CCC and then immediately
canceling it.
Fixes#47682 .
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
irq_lock() returns an unsigned integer key.
Generated by spatch using semantic patch
scripts/coccinelle/irq_lock.cocci
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
HDA is a common IP used across the entire ADSP line and deserves
a name respecting that alongside similiar IP drivers such as the
ADSP GPDMA driver.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This fixes an issue where IV index stage counting timer is not
started after the node is provisioned. This would have prevented node
from performing IV index updates.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
This change makes the optional procedures in the TBS Client optional
and configurable through Kconfig.
Signed-off-by: Fredrik Danebjer <fredrik@danebjer.com>
