This PR adds the following modem modules to the subsys/modem
folder:
- chat: Light implementation of the Linux chat program, used to
send and receive text based commands statically created
scripts.
- cmux: Implementation of the CMUX protocol
- pipe: Thread-safe async data-in/data-out binding layer between
modem modules.
- ppp: Implementation of the PPP protocol, binding the Zephyr PPP
L2 stack with the data-in/data-out pipe.
These modules use the abstract pipes to communicate between each
other. To bind them with the hardware, the following backends
are provided:
- TTY: modem pipe <-> POSIX TTY file
- UART: modem pipe <-> UART, async and ISR APIs supported
The backends are used to abstract away the physical layer, UART,
TTY, IPC, I2C, SPI etc, to a modem modules friendly pipe.
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Instead of using custom board init code, use a GPIO hog to initialize
the LCD backlight. Note that LCD backlight should be controller by the
display driver, but this is not supported now. Initializing defined LEDs
should be done by the application, using either the GPIO or LEDs driver
classes.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Config CONFIG_NATIVE_UART_0_ON_STDINOUT=y should be applied only for
posix architecture platforms.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add tests which use pytester to call pytest with pytest-twister-harness
plugin on previously defined test. This gives a possibility to test
plugin in end-to-end variant.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
According to new adapters API add new tests which verify their
correctness. Introduce some minor naming changes to describe better
their role.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add better description of available options and add actions which
should help to prevent from passing invalid options to plugin.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Remove log.py and by this logging configuration from
pytest-harness-plugin. Instead use pytest options for setting verbosity
and format of printed logs. Thanks to this management of verbosity
level can be easier for users.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Create helper class Shell which can be used in tests which require
interaction with shell application.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Move helper.py file content to utils.py file in device directory,
where those helper functions are used.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Divide dut fixture into three smaller fixtures to make it easier
to user to change dut fixture scope or to write her/his own dut
fixture. Add initialize_log_files method to make it possible to
initialize log files per each test.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Pass pytest test name to handler.log header to make it easier to
analyze handler.log content.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add readlines_until method to DeviceAdapter class to simplify using
adapters in tests by give user possibility to read output from device
until following conditions:
- provided regex was found
- provided number of lines was already read
- timeout was occurred
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Introduce changes into FifoHandler class to make it more safe
(especially to avoid blocking all program when FIFO queue is not opened
by other application).
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Select and place common code of three adapters (HardwareAdapter,
BinaryAdapterBase and QemuAdapter) into basic DeviceAdapter class.
Introduce new way of reading device output by run separate thread which
try to read device output and place it into internal python queue.
Thanks to this, now it is possible to create readline method for all
adapters, which can be unblock when timeout occur.
Collect all common steps which have to be done before setup device in
launch method. The same was done for teardown operations which were
placed into close method.
Additionally some protection mechanisms were introduced to prevent for
undesirable side-effects when user could try to launch to already
launched device or try to send some data to disconnected device.
iter_stdout method was replaced by two new methods: readline and
readlines. To make it possible to remove all read output from internal
buffer (queue), clear_buffer method was introduced.
Also unit tests were rewritten to work properly with current version
of adapters.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Change name of SimulatorAdapterBase class to more meaningful like
BinaryAdapterBase. This changes is also made to be more align with
Twister terminology.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add possibility of passing timeouts from Twister to pytest and unify
various timeouts used in adapters to point to one main timeout.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
PytestAssertRewriteWarning is raised when pytest-twister-harness
plugin is called from twister. Call register method to get rid
of that warning
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This platform should not be set as a default platform. It does not run
in CI, i.e. not a simulator/emulator.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This platform should not be set as a default platform. It does not run
in CI, i.e. not a simulator/emulator.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
LSI clock configuration for STM32WBA is located in backup domain.
The backup domain needs to be enabled before the LSI can be enabled.
Signed-off-by: Guillaume Gautier <guillaume.gautier-ext@st.com>
Ensure card CSD and CID variables are initialized in sd_ops functions
for reading card CSD and CID data.
Fixes#59562
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add TLS_DTLS_CID socket option, which enables to use the Connection ID
extension for the DTLS session.
The option provides control of the use of CID with the `setsockopt()`
function. The value provided can disable, enable, and control whether to
provide a CID to the peer. It uses a random self CID (if told to provide
one to the peer) unless TLS_DTLS_CID_VALUE set previously.
Add TLS_DTLS_CID_VALUE to get or set the CID sent to the peer, if any.
Add TLS_DTLS_PEER_CID_VALUE to get the CID value provided by the peer,
if any.
Add TLS_DTLS_CID_STATUS to determine if CID used, and whether
bidirectional or one way.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Signed-off-by: Pete Skeggs <peter.skeggs@nordicsemi.no>
Based on the 'Technical Reference Manual' for CC13x2/CC26x2 SimpleLink
MCU family, the device contains factory pre-programmed 64-bit IEEE MAC
address for 802.15.4 radio inside two FCFG 32-bit registers:
1. MAC_15_4_0: first 32-bit of the 64-bit IEEE MAC address
2. MAC_15_4_1: last 32-bit of the 64-bit IEEE MAC address
The way current version of the driver setups the address results in
incorrect bytes order (the address is reversed):
uart:~$ ieee802154 get_ext_addr
Extended address: AF:03:B7:25:00:4B:12:00
This fixes the problem in both drivers (also in the Sub-GHz version)
which results in use of proper EUI-64 address:
uart:~$ ieee802154 get_ext_addr
Extended address: 00:12:4B:00:25:B7:03:AF
IEEE MAC address was confirmed with UniFlash, nRF Sniffer for 802.15.4
and IEEE OUI database (00:12:4B is one of registered OUI for Texas
Instruments).
To prevent confusion in future, short notice about bytes order for
'mac' field in driver's data structures was also included.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
bt_l2cap_chan_send_sdu previously returned the number of bytes sent
in the last sent sdu buf fragment or 0 if the buf has only
one fragment. bt_l2cap_chan_send_sdu now returns the total data
bytes sent from the buf.
Signed-off-by: Tom Finet <tom.codeninja@gmail.com>
bt_l2cap_chan_send returns the total bytes sent from the buf,
hence test should only fail when it returns a negative error code
and not a positive number of bytes sent.
Signed-off-by: Tom Finet <tom.codeninja@gmail.com>
