This term needs to be defined to support documenting the effect of
various API calls on scheduler selection of the running thread.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The pinmux_basic_api test relies on a hardware loopback, manual
shorting of two GPIO pins. The Zephyr test framework does not allow
currently to define such pins in a generic way. The pinmux_basic_api
test hard codes pin numbers specific to a few evaluation boards.
The test has a few more flaws and limitations:
- it verifies that pin configured to function A can be controlled by
GPIO driver. It doesn't verify that pin configured to function B can
be contorolled by a corresponding peripheral driver.
- the test relies on level sensitive interrupt support which is not
always available.
- the test will pass even if there are erros when pin is configured to
function B.
- the test allows to configure both test pins as an output therefore
shorting the outputs.
Considering the flaws and limited coverage of the test as well as
missing features of the Zephyr test framework this commit removes the
testcase. It is not currently possible to write a generic pinmux
testcase that supports multiple boards and can be used to assess the
quality of the driver. Instead, to ensure the driver code will not
degrade, we need to rely on implicit testing done by the board
initialization code located in boards/ folder.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Updated the lll_conn_flush interface to pass the connection
handle while the LLL connection context stored handle has
been invalidated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Commit c248cdf17e remove deep sleep states
from residency policy based on SoC loses context in deep sleep states to
avoid a "forever timeout" power-off the whole system. It's right if deep
sleep means power off whole system only.
One of deep sleep states is that most power domains are shut off, but
except a few that retain just enough logic to allow the CPU to resume
from the same point of execution where it went to sleep. This is well
documented and implementations also have same behavior.
For another deep sleep state, system off, sys_pm_ctrl_disable_state can
prevent system off unexpectedly from being entered on long timeout. And
sys_pm_force_power_state can help power off whole system.
This reverts commit c248cdf17e.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
The terminal configuration should not be reset on exit if
sanitycheck's output is being directed to something that mediates the
terminal control, such as a pager. Only do the reset if stdout is
interactive.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Files that need something from this directory should be using the
prefix, e.g. <drivers/sensor.h> instead of just <sensor.h>.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The build infrastructure should not be adding the drivers subdirectory
to the include path. Fix the legacy uses that depended on that
addition.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Zephyr-specific files in mcuboot break when the drivers subdirectory
is no longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
A Zephyr-specific file breaks when the drivers subdirectory is no
longer present in the include path.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
drivers/display.h was being included both as a double-quote direct
include and an angle-quote in the drivers parent directory. Both
resolve to the same file. Remove the unqualified reference.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The callback function may modify the att->req and it has to be
called after the att_process. The att_process does not re-check
if att->req is still NULL.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
Missing CONFIG_ prefix in #ifdef, leading to some dead code.
Found by scripts/kconfig/lint.py, which flagged it as unused.
Piggyback removal of a redundant 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The CONFIG_ prefix was missing.
Found with a work-in-progress scripts/kconfig/lint.py check.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The CONFIG_ prefixes were missing.
Found with a work-in-progress scripts/kconfig/lint.py check.
These are defined in lib/gui/lvgl/Kconfig.objects.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The CONFIG_ prefixes were missing on these.
Found with a work-in-progress scripts/kconfig/lint.py check.
This symbol is defined in kernel/Kconfig.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
IS_ENABLED() is only useful for macros that might be undefined.
VERBOSE_DEBUG is defined at the top of these files.
Also makes it harder to confuse for for Kconfig references.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
