This adds a int return to recv callback which can be used to notify the
stack about errors when receiving a packet. In addition to that the user
can return -EINPROGRESS to inform the stack the data will be processed
asynchronously which can be complete by calling
bt_l2cap_chan_recv_complete.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add a new command in the shell which can be used to set the channel
map by specifying a 37 bit bitmask written as a five byte hex array.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This adds a shell command for qualification purposes to enable/disable
Bonding flag in Authentication Requirements.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This enables using these commands to perform discover all procedure:
> gatt-discover-primary
Discover pending
Service 1800 found: start handle 1, end_handle 5
Service 1801 found: start handle 6, end_handle 9
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Added a new command, which can be used to test the directed advertising
API. This command allows user to turn on directed advertising in two
modes: low and high duty. High duty mode is the default one.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Make it possible to have multiple identity addresses as an LE
peripheral. For central role only the default identity is supported
for now. This also extends the flash storage in a backward compatible
way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a callback struct with only the pairing_confirm authentication
method. This is useful both for just-works testing as well as the
recently added fixed passkey support.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
hci-cmd can be used to inject an arbritrary HCI command which can be
useful when testing vendor/new commands.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
name command can be used to read or write the GAP Device Name which is
used by the advertise command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable settings and increase the system workqueue size to deal with
the stack usage. This also makes it possible to test unpairing support
with the shell's 'clear' command.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The same functionality is now supported by the settings-based
solution, so remove bt_storage out of the way. There were stubs in
bt_storage to handle per-peer information (e.g. pairing keys) but this
was never actually implemented in full. The next step is to add this
support to the settings-based solution.
Leave the code for generating temporary IRK and identity address in
case BT_SETTINGS is not enabled. Also leave the code for using vendor
HCI to read the identity address, in which case the settings
implementation will not touch it.
Introduce a new bt_unpair() API to replace the removed
bt_storage_clear(), since the latter was actually doing more than just
storage management: it was also handling runtime storage of pairing
information. Later, the bt_unpair() implementation will be extended to
clear settings-based pairing storage.
There is one feature that the bt shell module looses: the ability to
give a specific identity address to the "init" command as a parameter.
We might look later in the future if this is really needed, and add a
separate API for this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This was originally added as a work-around to avoid the heavy stack
consumption of the TinyCrypt PRNG when generating NRPAs. This is
no-longer an issue, and there are in fact no (in-tree) users of this.
Remove it before it gains any wider users, since it was in many ways a
hack/work-around to begin with.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
A few lines earlier the code bails out in case len is 0. Checking for
buf->len < 1 is the same as checking for buf->len == 0. Since len is
guaranteed to be > 0 here the check len > buf->len implicitly checks
for buf->len == 0, i.e. the second test can be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add conditional compilation and move code to support
building a non-connectable Bluetooth shell application.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Rename the BT_CONTROLLER prefix used in all of the Kconfig variables
related to the Bluetooth controller to BT_CTLR.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The API name space for Bluetooth is bt_* and BT_* so it makes sense to
align the Kconfig name space with this. The additional benefit is that
this also makes the names shorter. It is also in line with what Linux
uses for Bluetooth Kconfig entries.
Some Bluetooth-related Networking Kconfig defines are renamed as well
in order to be consistent, such as NET_L2_BLUETOOTH.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
gatt-unregister-service can be used to remove the test service at
runtime causing service changed to be indicated:
00:1b:dc:07:31:88 (public)> gatt-unregister-service
[bt] [DBG] gatt_indicate: (0x0011e100) conn 0x0011d880 handle 0x0008
[bt] [DBG] bt_att_req_send: (0x0011e100) conn 0x0011d880 req 0x0011db00
[bt] [DBG] att_send_req: (0x0011e100) req 0x0011db00
Unregistering test vendor service
< ACL Data TX: Handle 3585 flags 0x00 dlen 11
ATT: Handle Value Indication (0x1d) len 6
Handle: 0x0008
Data: 0a001000
> ACL Data RX: Handle 3585 flags 0x02 dlen 5
ATT: Handle Value Confirmation (0x1e) len 0
Jira: ZEP-2225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add Bluetooth Link Layer LE Advertising Extensions commands
for manual testing the feature during development. First one
being advx command to start non-connectable non-scannable
extended advertising.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add a repeat param to gatt-write-without-response so that
it covers what gatt-write-without-response-repeated was
doing. gatt-write-without-response was removed in the
commit 26eae70da.
gatt-write-signed too will have repeat param with this
change.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This makes gatt-write-signed to reuse cmd_gatt_write_without_rsp since
it is quite similar and that adds the ability to send multiple octecs
instead of just a single byte.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes gatt-write-without-response-repeated and makes
gatt-write-without-response similar to gatt-write which was the
intention of gatt-write-without-response-repeated.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In order to properly queue request there need to be a bt_att_req
storage but none of the calls to gatt_write_ccc were using the params
causing gatt_send to use bt_att_send and not bt_att_req_send.
To fix this now all the callers of gatt_write_ccc do set the params
properly but this means that bt_gatt_unsubscribe has to wait for it
to be completed before the application can reuse the
bt_gatt_subscribe_params.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Both scan on and scan passive performed passive scanning,
fixed scan on command to use active scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This replaces the use of shell_register_prompt_handler with
SHELL_REGISTER_WITH_PROMPT which doesn't overwrite other modules
prompt.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If CONFIG_BLUETOOTH_GATT_CLIENT is not defined disable command that
would depend on it.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
