Skipped status fits quarantined items better than filtered.
Filtered tests are by default removed from reports, which
shouldn't be the case for quarantined tests.
Adjust tests unit and blackbox tests accordingly.
Signed-off-by: Maciej Perkowski <maciej.perkowski@nordicsemi.no>
Quarantine filter was not correctly identifying the simulator name.
Now it uses the simulator name from the Platform object,
ensuring that quarantined tests are properly excluded or verified
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Removed logger.setLevel(...) from all twister modules, becasue
there should be only one place where twister loggers are configured,
and the log level should be set in that place.
This should be done in twister_main.py in setup_logging function.
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
Add option to force integration mode on a defined list of tests, for
example tests for sample that are identified with 'sample.'.
A sample per definition shall be tested on documented and supported
platforms listed in the sample documentation. Samples shall not be used
as tests to verify functionality of a feature on all available plaforms
in Zephyr.
To still allow testing on platforms not listed in the doc, and when such
platforms are covered by the provided filter, we should still be able to
build/run the tests on those platforms (not directly listed in
integration_platforms).
We detect a sample by its test identifier, i.e., it starts with 'sample.'.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
native_sim only works and builds on Linux, when running twister on the
Mac, this platform fails to build and reports errors.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Problem
-------
Board & SoC extensions are used to define out-of-tree board variants or
SoC qualifiers. When a board is extended, it has multiple directories
associated with it (each with its own `board.yml`), where twister should
be able to find additional platform files to support these qualifiers.
Currently, this doesn't work, because twister only traverses the primary
BOARD_DIR and ignores the rest.
The fix would've been trivial in the case of "legacy" platform files,
i.e. those of the form `<normalized_board_target>.yaml`, but it's less
straightforward for the newly introduced `twister.yaml` format.
A `twister.yaml` file contains platform configuration that can be shared
by multiple board targets and tweaked for specific targets by using the
top-level `variants` key. Normally, there is at most one `twister.yaml`
per board, but the file isn't necessarily unique to one board. Instead,
it's unique to one directory, which may define multiple boards (as is
the case with e.g. `boards/qemu/x86/`).
With extensions in the picture, the goal is to initialize platforms when
given multiple `twister.yaml` per board. The OOT files are expected to
only provide information about OOT board targets, without being able to
override in-tree targets (same principle as in the Zephyr build system).
Solution
--------
The `twister.yaml` handling is broken up into multiple passes - first
loading all the files, then splitting the `variants` keys apart from the
shared configuration, before constructing the Platform instances.
The purpose of the split is to treat the variant information as global,
instead of making unnecessary or faulty assumptions about locality.
Remember that the build system can derive board target names not only
from `board.yml`, but from `soc.yml` too. Considering that any board may
end up using an OOT-extended SoC (and hence multiple `soc.yml` files),
not every board target can be said to belong to some board dir.
Unlike the variant data, the remaining top-level config is still rooted
to the primary BOARD_DIR and inherited by the extension dirs from there.
This is quite intuitive in most imagined cases, but there is a caveat:
if a `twister.yaml` resides in an extension dir, then it is allowed to
have a top-level config of its own, but it will be silently ignored.
This is to support corner cases where, much like how a single board dir
can define multiple boards, a single board dir can also extend multiple
boards, or even do both. In those cases, the primary BOARD_DIR rule
should make it unambiguous which config belongs to which board, even if
it may seem counter-intuitive at first.
For concrete examples of what this means, please see the newly added
platform unit tests.
As part of these functional changes, a good chunk of logic is moved out
of `TestPlan.add_configurations()` into a new function in `platform.py`.
This is because recombining the top-level and variant configs requires
direct manipulation of the loaded YAML contents, which would be improper
to do outside of the module responsible for encapsulating this data.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
In situations where a test won't be run because there is a gap
in the hardware support, add the gap information to the "reason"
field to aid in debugging test cases.
With this change, the reason field for the error in test case
will show the gap:
e.g. reason field now updated with gaps
"No hardware support {'usbd'} but is one of the integration platforms"
Signed-off-by: David Leach <david.leach@nxp.com>
not force host variant if environment is setting something different in
the case of posix arch.
Fixes#83766
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Added integration_toolchains to allow building/testing with multiple
toolchains available in the environment.
This changes the output structure and adds another level in the path
under twister_out signifying the toolchain used. The toolchain used
(variant) is also part of the json output now.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Extend `--no-detailed-test-id` command line option: in addition to its
current behavior to exclude from a test Suite name its configuration path
prefix, also don't prefix each Ztest Case name with its Scenario name.
For example: 'kernel.common.timing' Scenario name, the same Suite name,
and 'sleep.usleep' test Case (where 'sleep' is its Ztest suite name
and 'usleep' is Ztest test name.
This way both TestSuite and TestCase names follow the same principle
having no parent object name prefix.
There is no information loss in Twister reports with this naming:
TestSuite is a container object for its TestCases, whereas TestSuite
has its configuration path as a property.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
In case of unknown platforms in filters such as plaform_allow,
integration_plaforms or platform_exclude, report an error and exit.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
bsim requires a special setup for it to be usuable and run by twister.
If this environment is not available, we should not error when the
platform is an integration platform.
Most developers and users of twister will not have the babblesim setup
and reporting errors is misleading and confusing. So if such env. is not
available, just filter as usual and do not error.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fixes ruff linting errors UP030, UP031, UP032,
which make you use format specifiers (fstrings)
instead of printf formatting or str.format().
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error F541,
where an fstring is used when a normal
string would suffice.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error B023,
where function definitions use
loop variables incorrectly.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error B904,
where an error raised inside an except
clause does not specify from where it
should start.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM102,
where multiple ifs were used instead
of combining them with and or similar
operators.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error E741,
where a variable name is ambiguous
or hard to read (e.g. l).
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes ruff linting error SIM1101,
where a builtin, like any() or all()
has been reimplemented.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This fixes errors E402 - module import
not at top of file.
One error in testplan.py left in,
as it is a part of a obscure 2020 fix
that would need to be re-tested.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
#79174 incorectly interpreted the condition. If no simulator is found
if cannot be "renode" and therefore robot should be considered unsupported.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
add vendor_allow and vendor_exclude to the list of filters. The vendor
data is maintained in the board.yml files.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Detect duplicate TestSuites on load, and raise error when it happens
with `--no-detailed-test-id` option which shortens TestSuite name
excluding the test project path prefix, thus increasing chances
for duplicates. Without this check, only the last duplicated
test configuration was selected while others silently ignored.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Fix duplicate test scenario error reporting to show paths to all
twister.yaml configuration files where these duplicates were found.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
This change introduces the ability in twister to select which
emulation/simulation tool to use on the command line.
If none is specified, it will select the first in the list.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
Fix wrong reporting about where testcases were executed.
We have:
INFO - 1130 of 1130 executed test cases passed (100.00%) on 0 out of
total 860 platforms (0.00%).
which is obviously wrong.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When using the --build-only into --test-only
Twister setup, NOTRUN statuses were not properly rerun.
Now they are properly run again if runnable.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Fixes: #69548
Support extending an existing board with new board variants.
This commit introduces the following changes to allow a board to be
extended out-of-tree.
The board yaml schema is extended to support an extend field which
will be used to identify the board to be extended.
A board 'plank' can be extended like this:
> board:
> extend: plank
> variants:
> - name: ext
> qualifier: soc1
For the rest of the build system this means that there is no longer a
single board directory.
The existing CMake variable BOARD_DIR is kept and reference the
directory which defines the board.
A new CMake variable BOARD_DIRECTORIES provides a list of all
directories which defines board targets for the board.
This means the directory which defines the board as well as all
directories that extends the board.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
if alias or shorthand name is provided on the command line, we need
convert this to complete target name for the filters to work.
Fixes#80332
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
--device-testing implies runnable tests, this was the case before the
rework and was missed in one spot, so instead do that directly in the
argument parser.
Fixes#80428
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We now use hwmv2 to list boards instead of relying on twister specific
config files.
One yaml files (twister.yaml for now) will have all the data needed for
all possible targets and variations of a board reusing most of the data
where possible and variations can override the top level data.
Twister keeps track of 'aliases' of boards and identifies that for
example native_sim is the same as native_sim/native, so either names
will be possible in both test yaml files or on the command line,
however, the reporting will always use the full name, so no there is no
confusion about what is being tested/built.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Some dict.get() calls did not use a TwisterStatus
as a default value, thus using a NoneType where
TwisterStatus should appear.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Get data for various roots from modules and do not hardcode location
when retrieving list of boards in testplan.
Fixes#71761
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various different Statuses were joined into a single class,
TwisterStatus. This change anticipates further streamlining
of the Twister's approach to Status.
Code guarding Twister's Properties was shortened to a
value check only.
QEMUOutputStatus was left separate, as doubts were cast
whether it should remain a status. Leaving it separate makes
its removal easier.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
Now statuses are not just a str that can be easily mistyped
or assigned wrong. Now they are an Enum.
Signed-off-by: Lukasz Mrugala <lukaszx.mrugala@intel.com>
This change is removing some deprecation warnings
which for some reason causing failing tests with
Python 3.12 on CI #76877.
Also, it fixes warnings from pytest like:
PytestCollectionWarning: cannot collect test class 'TestPlan'
because it has a __init__ constructor
(from: scripts/tests/twister/test_testplan.py)
Signed-off-by: Lukasz Fundakowski <lukasz.fundakowski@nordicsemi.no>
Twister scans C-files to find testcases that are implemented
using ZTest framework. Also runs scanning of Elf files
after building. Skip scanning files if it is not required.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
