Add a compliance check that tries to load MAINTAINERS.yml with
get_maintainer.Maintainers() if it's been modified by the CL, and fail
compliance if it fails to be parsed.
Example output:
```
ERROR : Test MaintainersFormat failed:
Error parsing MAINTAINERS.yml: MAINTAINERS.yml: YAML error: while
scanning a simple key
in "MAINTAINERS.yml", line 976, column 1
could not find expected ':'
in "MAINTAINERS.yml", line 977, column 3
```
```
ERROR : Test MaintainersFormat failed:
Error parsing MAINTAINERS.yml: MAINTAINERS.yml: glob pattern
'drivers/regulator' in 'files' in area 'Drivers: Regulators' matches a
directory, but has no trailing '/'
```
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Make sure that this runner can handle multiple --tool-opt arguments,
and that the options specified for pyocd are passed to that tool in
order.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Added stress test which validates proper behavior of mpsc_pbuf
when there are 2 producing contexts and dedicated consumer
context. Various configuration are tested with consumer having
the lowest, medium and the higher priority.
Test produces random size packets at random intervals. It validates
that each produced packet is consumed or dropped.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Fixed issues which were leading to failures when producing
and consuming is preempted at various stages.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Adapt test to the new method of buffer full detection. New
method increased buffer capacity.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Use flag instead of word in the buffer. Using this method allows
to dedicate full buffer capacity for data.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Remove extra string size addition to the log message size when posix
is used. First string is considered as read-only also for posix so it
does not add to the message size. Test was passing before but change
in data handling in mpsc_pbuf revealed bug in the test.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add reset of buffered messages counter to the initialization function.
It is for testing purposes sinces in the application logging is
initialized only once.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Change the bindings file filter to check for "dts/bindings/" as a
substring rather than prefix. This makes the check catch files in
subdirectories as well (for sample tests and samples), and makes the
check usable on external projects where the bindings may not live in the
project root.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Move the file iteration loops of the bindings compliance check in the
callers, so that if we add more checks we don't have iterate on each one
of them and a check works on a single file.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Implemented a sample that shows configuration and basic usage of monitor
mode debugging feature.
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
Debug monitor needs to be configured to a low priority in order to be
useful for debugging (to prioritize other interrupts when waiting on a
breakpoint).
Added a config that configures the interrupt this way.
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
It seems that currently it's impossible to create a custom
implementation for debug monitor exception without updating the vector
table (z_arm_debug_monitor maps to fault).
My proposition is to make this symbol weak, so that it can be overriden.
Signed-off-by: Piotr Jasiński <piotr.jasinski@nordicsemi.no>
Change Summary: The TX/RX FIFO was not flush on initialization thus
causing bad transactions. Thus, we need to flush the FIFO, and
according to Synopsys DW I2C spec, we can flush TX/RX FIFO by clearing
the enable bit. This is verified with our own I2C test on the SoC with
Synopsys DW I2C IP.
Signed-off-by: Dennis Wang <dennisjw@fb.com>
CONFIG_SOC_MEC1501_TEST_CLK_OUT is removed from mec15xx SOC,
hence remove this configuration in mec15xxevb power management
sample and add board overlay with right configurations.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Remove the test clock out Kconfig from SoC level. Instead use
device tree PINCTRL entry with updated clock control driver.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Add support for Microchip MEC15xx to the XEC clock control driver.
MEC15xx 32KHz clock support uses the same 32KHz source for both the
PLL and peripherals. MEC152x does not include the PCR clock monitor
present in MEC172x. MEC15xx and MEC172x support internal silicon
oscillator, parallel and single ended crystal inputs, and the
32KHZ_PIN input. MEC152x supports fall back to internal silicon
OSC when VTR and 32KHZ_PIN are turned off. Therefore in MEC152x the
internal silicon oscillator can only be disabled if using an external
32KHz which is always on. For MEC152x the driver will only use the
PLL source clock device tree value.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Fix Microchip XEC clock control driver single-ended XTAL2 pin
initialization. Add support for external 32KHZ_IN pin as a
clock source including PINTRL to switch the GPIO to 32KHZ_IN
function. Add device tree option to disable internal silicon
oscillator if it is not required by the configuration. Add
device tree tuning options based on crystal and board layout.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
Some baudrates are not supported in certain SoCs.
Signed-off-by: Marcin Szymczyk <marcin.szymczyk@nordicsemi.no>
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Switch to using the dedicated `gpio_is_ready_dt`
function instead of the raw `device_is_ready`.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Switch to using the dedicated `gpio_is_ready_dt`
function instead of the raw `device_is_ready`.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
Add initial support for gd32l23x series. gd32l23x used Cortex-M23, based
on ARMv8-M baseline, implement the System Timer.
Signed-off-by: HaiLong Yang <hailong.yang@brainco.cn>
Unit test project for bt_id_read_public_addr().
This part of subsys/bluetooth/host/id.c unit testing.
Signed-off-by: Ahmed Moheb <ahmed.moheb@nordicsemi.no>
