With --no-skipped-report, twister will skip over all tests marked as
skipped (filtered) in the junit report.
This is useful for CI where have 1000s of filtered tests that appear in
the report and in some cases cause tools parsing the output to fail or
provide incomplete results.
Fixes#38179
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Commit 28b2e55321 introduced a regression
into twister workflow, breaking memory footprint calculation.
The commit changed name of produced .elf files.
There is no more zephyr_prebuilt.elf and instead we have
zephyr_pre0.elf and zephyr_pre1.elf. This commit fixes a filter
telling which files to exclude when calculating memory footprints,
to match the current status.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
nrfjprog prints out a warning if a device is programed without the
--verify option, which can be confusing.
So added the option when programming with nrfjprog.
Then west flash can be used without getting a warning.
Also changed the tests to only accept programming with --verify
option.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Use the common code in scripts/list_boards.py for finding matching
boards in scripts/ci/test_plan.py. This has the benefit of not trying to
use board revisions files as board names.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
west build supports specifying the board revision using @revision, but
it's not mentioned in the help text. This commit updates the help text
to describe how to specify the board revision.
Signed-off-by: Gregers Gram Rygg <gregers.gram.rygg@nordicsemi.no>
Sometimes custom script fails, but we can't see the
error information in twister log, because the twister
uses _ to ignore the stderr.
Signed-off-by: Jingru Wang <jingru@synopsys.com>
The -c option points rimage at its main and mandatory configuration
file ("signing schema"). The -c option passed by sign.py to rimage comes
from _two_ different places:
A. From the command line, example:
west sign -t rimage -- OTHER_ARGS_FOR_RIMAGE -c foo.toml
However passing -- -c signing_schema.toml on the west sign command line
has always been optional because:
B. west sign systematically adds another `-c bar.toml` option. The name
'bar' is found in the CMakeCache. Right now 'bar' comes from
a product specific `board.cmake` file.
There were two problems fixed by this commit:
1. The -c option from the command line was passed _first_ but the last
-c wins with rimage. The command line should have precedence.
2. The "last -c wins" behavior is not documented/official, it's an
rimage implementation deteail.
To fix both, simply scan the command line for a '-c' option. If any is
found then it takes precedence over the CMakeCache-based value which is
dropped.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Create a cmake/modules folder containing all Zephyr CMake modules.
All Zephyr cmake files that are included from boilerplate are now
converted into CMake modules which can be individually loaded.
The Zephyr CMake package is updated to support loading of individual
CMake modules using the COMPONENTS argument to `find_package(Zephyr)`.
If the COMPONENTS argument is not specified, the default Zephyr build
system will load.
If COMPONENTS is specified then, only those components and the
dependencies will be loaded.
If a Zephyr CMake module depends on another CMake module which has not
been loaded, it will automatically be loaded.
This allows us to modularize and reuse individual parts of the Zephyr
CMake build system in a more flexible way in future.
Such usage could be:
- Higher livel multi image build system
- Invocation of individual components, for example dts processing by
twister without loading all build code
- Doc build
- Unittesting
With this new CMake package and CMake module scheme then direct
sourcing of boilerplate.cmake has been deprecated.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
* Use case of interest:
Some platforms are shipping in parallel to the internal FLASH some other
storage / external FLASH (usually a QSPI FLASH) that can be used to
execute (XIP) code from.
The content of this external FLASH can usually be written at flash time
using proper tools (see for example the case of the external FLASH on
the nRF5340DK that can be written at flash time using nrfjprog).
The external FLASH is a nice addition that is extremely useful when a
large application code doesn't entirely fit on the internal FLASH so
that we could want to move part of it in the auxiliary FLASH to XIP the
code from there.
* The problem:
Right now Zephyr doesn't have a formal and generic way to move at build
time part of the code to a different memory region.
* The current status:
Zephyr is indeed shipping a code_relocation feature but that doesn't
entirely match our needs.
When XIP is enabled, the code_relocation feature is used in Zephyr to
move the selected code (that is to copy text section, to initialize data
and zero bss) from FLASH to SRAM at run time and execute code from SRAM.
The relocation is done by a generated snippet of code that is
memcpy()-ing the right content to the destination region also using some
build-time generated portions of linker script to retrieve start and
destination addresses and regions.
* This patch:
This patch is leveraging the code_relocation code and adding a NOCOPY
feature. This feature is using the code_relocation feature to
dynamically build the linker script snippets but entirely skipping the
run-time code relocation so that the code can be XIP-ed from the
destination region.
* Example:
Let's say that we have a big file called `huge_file.c` that we want to
XIP from the external FLASH that is mapped in an EXTFLASH region.
In this case we should enable `CONFIG_XIP` and
`CONFIG_CODE_DATA_RELOCATION` and instruct cmake as follows:
zephyr_code_relocate(src/huge_file.c EXTFLASH_TEXT NOCOPY)
zephyr_code_relocate(src/huge_file.c SRAM_DATA)
this means that:
- The .text section of the `huge_file.c` must reside in the EXTFLASH
memory region and we do not need to copy the section there because we
are going to XIP it (and we assume that the file is going to be placed
in the external FLASH at flash time).
- The .data section of the `huge_file.c` must still reside in the SRAM
memory region.
* TODOs:
It's desirable to have the possibility to relocate libraries and
pre-build files instead of source code files.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add a new cmake extension function:
dt_comp_path(<var> COMPATIBLE <compatible> [INDEX <idx>])
to get a list of paths for the nodes with the given <compatible>. This
is useful when we have to cycle through several nodes with the same
compatible.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
fixtures could also be given by twister command with --fixture option
explicitly, not only hardware map file. In this case, we should
assign those fixtures to each devices too.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
Zeroing the BSS and copying data to RAM with regular memset/memcpy may
cause problems when those functions are assuming a fully initialized
system for their optimizations to work e.g. some instructions require
an active MMU, but turning the MMU on needs the .bss section to be
cleared first, etc.
Commit c5b898743a ("aarch64: Fix alignment fault on z_bss_zero()")
provides a detailed explanation of such a case.
Replacing z_bss_zero() with an architecture specific one is problematic
as the former may see new sections added to it that would be missed by
the later. The same reasoning goes for z_data_copy().
Let's make maintenance much easier by providing weak versions of
memset/memcpy that can be overridden by architecture-specific safe
versions when needed.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add possibility to create shorter build paths when --short-build-path
option is enabled. This can help during run Twister on Windows OS and
building programs by CMake which has a problem when paths with building
files are too long. The solution based on symbolic links which help to
connect "traditional" long paths with shorter one like:
"twister_links/test_0".
Fixes#41929
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Kconfig symbols must not be defined in Kconfig.defconfig.* files. Such
files are meant to change the default value of certain options.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The problem with append is that when doing incremental (non-clean)
build, the content of these files are appended each time to the previous
leftover content.
Example:
# west build -p -b qemu_cortex_m3 \
samples/application_development/code_relocation/
# // disable for example CONFIG_XIP
# west build -b qemu_cortex_m3 \
samples/application_development/code_relocation/
at this point the content of the generated files (i.e.
linker_relocate.ld) is wrong.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Looks like the 4.33 release has some more issues, so let's wait until
everything gets fixed before allowing future versions.
Ref. https://github.com/michaeljones/breathe/issues/805
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Sphinx 4.33.0 introduces Graphviz support, but the Graphviz
configuration value names clash with the Sphinx built-in Graphviz
extension.
Issue: https://github.com/michaeljones/breathe/issues/803
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
When testcase written in ztest is skipped by ztest_test_skip() function,
then "SKIP" information is printed in output data. This "SKIP" result is
set as result of performed testcase, but the information about reason is
still "Unknown". This patch fix this problem and if all test scenario
has state "passed" (so testcases have result "PASS" or "SKIP"), reason
is still set as "Unknown" and if any of testcase has result "SKIP" then
set reason as "ztest skip".
Fixes#42414
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Fixes: #39503Fixes: #40167
This commit moves `BUILD_VERSION` CMake variable from a compile
definition to be a define inside version.h.
Besides the benefit of having related settings grouped in a common
header, it also means that an updated `BUILD_VERSION` value does not
need to trigger re-compilation of all source files.
When using compile definitions, CMake cannot tell whether a given source
files uses the definition or not, and hence all sources must be
recompiled to be sure they are up-to-date.
Placing `BUILD_VERSION` in version.h, the source dependencies ensures
that only source files including `version.h` gets recompiled.
As part of this, version.h generation is moved so that it is now done
at build time.
This means that re-generation of version.h is no longer depending on a
CMake re-run but can have it's own dependency in `.git/index` when git
described is used to obtain `BUILD_VERSION` information.
Generation of logging dictionary database has been updated to support
BUILD_VERSION from header file instead of CMake configure time variable.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Need a better way or tagging for this area, we have been introducing
regressions that were undetected due to those filters.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When using the west spdx functionality to create an SPDX SBOM
during a build, several SPDX Documents are created. In some
instances, the SPDX metadata field PackageLicenseInfoFromFiles
is required to be present according to the SPDX 2.2 spec, but is
being omitted from the build.spdx Document if no licenses were
detected.
This commit fixes this bug so that a NOASSERTION value is written
for this field for Packages that do not contain any detected
licenses.
Additionally, this ensures that Packages with a FilesAnalyzed
value of false do not have this field written, also in accordance
with the spec.
Fixes#42070
Signed-off-by: Steve Winslow <steve@swinslow.net>
sometimes there are some unencodable unicode chars from output
of west flash command, need to ignore them rather than reporting
an error.
Signed-off-by: Chen Peng1 <peng1.chen@intel.com>
CONFIG_OPENOCD_SUPPORT was deprecated in favor of
CONFIG_DEBUG_THREAD_INFO in Zephyr v2.6.0 and can now be removed.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
This commit adds support for adjust the addresses of the final image.
This is useful when the image is to be flashed at a location different
from the LMA address encoded in the ELF file by the linker.
An example use-case is multicore systems where core A might load image
from a flash partition into RAM in order for core B to execute and load,
but where the image itself is build with the RAM addresses as LMA.
It updates the zephyr_image_info.h header with information of adjustment
value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
This commit adds the `gen_image_info.py` script which supports creation
of a header file with image information from the EFL file.
This version populates the header file with:
- Number of segments in the image
- LMA address of each segment
- VMA address of each segment
- Size of each segment
The header file can be used by a secondary build system which needs this
information.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
MIPS (Microprocessor without Interlocked Pipelined Stages) is a
instruction set architecture (ISA) developed by MIPS Computer
Systems, now MIPS Technologies.
This commit provides MIPS architecture support to Zephyr. It is
compatible with the MIPS32 Release 1 specification.
Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
When strings are not in the dictionary, the parser would crash.
This works around the issue by indcating an unknown string
as "string@<addr>".
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This reports the warning fixed in commit 61fe69dded ("sys:
device_mmio.h replace <toolchain/common.h> with <toolchain.h>")
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Testing shows cmake is invoked directly, not through a shell.
Fixes commit 5092541e2b ("sanitycheck: disable erroring on warnings").
Note EXTRA_AFLAGS was quoted only on the left side!
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Changes will raise error and break program in following three situations:
1. Platform name pass in --platform option does not exist.
2. During using --all option, platform from platform_allow list does not
exist.
3. During using --integration option, platform from
integration_platforms list does not exist.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
When some testcase is skip in their source code by ztest_test_skip()
function in final json report it is marked as pass what is wrong. Due to
the changes in this commit those skips can be marked properly.
Fixes: #41440
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
This print() call was introduced as part of commit 16571db029 ("soc:
esp32: add support to mcuboot build") probably as a leftover from
debugging stage. Remove that, so flash command is not printed by
default. Those commmands can be easily printed by passing -v flag to
`west -v flash ...` command.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
breathe: for simplicity, require versions > 4.30 (lower versions have
known issues, so do not take risks).
Sphinx: start requiring versions >=4.x. Keep with compatible versions,
since Sphinx major updrages can easily break extensions, themes, etc.
sphinx_rtd_theme: upgrade to >=1.x. Again, keep with compatible versions
since we have style customizations that can likely break on major
upgrades.
pygments: Allow any version >=2.9 (version that introduced DT support).
We do not have strong compatibility requirements here.
sphinx-notfound-page: Remove any requirements, we do not have strong
requirements for this one.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Whenever build/zephyr/runners.yaml does not specify the location of the
openocd executable we seemd to be leaving the executable variable as
None. Instead, use its executable name.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Select configuration when mcuboot is enabled.
At this moment, only UNSIGNED image is supported as per
Espressif's mcuboot porting.
This also updates esp32 runner to use proper bin_file name
and updates default bootloader check.
Move CMakeLists.txt content from board to soc directory
as this support is for esp32 architecture and not board
specific.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
IDF bootloader requires partition table which is not a requirement for
MCUboot. Hence, esp32.py is updated to flash partition table only if it
exists.
Current implementation only allows flashing zephyr.bin. This commit adds
capability to flash binaries with other names as well
(e.g. - zephyr.signed.bin)
Signed-off-by: Shubham Kulkarni <shubham.kulkarni@espressif.com>
When generating new map we store serial_baud, but the schema has 'baud'
only, so call this baud in the class and resolve the issue of creating
new maps.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changes will log error message in following three situations:
1. Platform name pass in --platform option does not exist.
2. During using --all option, platform from platform_allow list does not
exist.
3. During using --integration option, platform from
integration_platforms list does not exist.
Fixes#31868
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
