Fix ISO Broadcast only supported related conditional compile
so that data path setup does not return command disallowed.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move the iso_interval field from ULL to LLL context to
facilitate calculation of timestamp when there is PTO in
the BIG events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Limit the maximum ACL Tx buffer size to 251 octets due to
implementation restricted use of uint8_t for PDU len field,
also used as the Tx buffer size data type.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix compile warning filling 24-bit value in 3 octets using
sys_put_le32, used sys_put_le24 instead.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use defines for AD data format field sizes and offsets when
populating AD data format in advertising PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This is initial commit towards integration of ISOAL Rx for
Broadcast/Synchronized Receiver ISO support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the LE BIG complete event generation to not use the
Sync Established structure to access the status value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the BIG Sync Lost event generation to not use the Sync
Established structure to access the reason value.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation of BIG Create Sync in LLL. Generation of
LE BIG Sync Established event and LE BIG Sync Lost event
notifications from the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to generate the Create BIG Complete
event after the first empty BIS PDU has been transmitted.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Pushes all work done in the topic-ble-llcp branch into main branch
This is a refactoring of the LL control procedures; the refactored
control procedures are hidden behind a KConfig option and
per default disabled
Goal of the refactoring:
close issue Link Layer Control Procedure overhaul #15256
make it easier to add/update control procedures
Refactoring consists in principal of writing explicit state machines
for the control procedures.
To reduce the risk of regression errors unit-tests have been added
Following control procedures are implemented:
Connection update procedure
Channel map update procedure
Encryption procedure
Feature exchange procedure
Version exchange procedure
ACL termination procedure
Connection parameters request procedure
LE Ping procedure
Data Length Update procedure
PHY update procedure
Min. nr. Of channels used procedure
Constant Tone extension request procedure
This is a joined work by the people listed in the signed-off-by
list (in alphabetical order)
Signed-off-by: Andries Kruithof Andries.Kruithof@nordicsemi.no
Signed-off-by: Erik Brockhoff erbr@oticon.com
Signed-off-by: Piotr Pryga piotr.pryga@nordicsemi.no
Signed-off-by: Szymon Janc szymon.janc@codecoup.pl
Signed-off-by: Thomas Ebert Hansen thoh@oticon.com
Signed-off-by: Tommie Skriver tosk@demant.com
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Fix Periodic Advertising Synchronize implementation to
generate Synchronization Failed to be Established event
when 6 AUX_SYNC_IND PDUs are not received when establishing
synchronization.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move Periodic Advertiser List option check in LE Periodic
Advertising Create Sync command to HCI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Scan Duplicate Filtering to consider different
advertising mode and multiple advertising set id from same
advertiser Bluetooth device address.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In HCI event, PHY indices start at 1 compare to 0 indexed in
aux_ptr field in the Common Extended Payload Format in the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to fragment the list of received Extended
Advertising PDUs into HCI LE Extended Advertising report
events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implement setting the correct directed advertisers address
type in the Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Advertising Report data status to have
"Incomplete, data truncated, no more to come" when data
length is more than "Scan_Max_data".
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There were no assignment to iq_report->hdr.handle in the code
hence all IQ samples reports had the same handle value which
was zero.
Since the handle is related with ll_sync_set pointer the handle
value may not be set in LLL.
The best place to set handle value is thread context where
bt_hci_evt_le_connectionless_iq_report is prepared.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add missing code responsible for handling of allowed CTE types
in HCI_LE_Periodic_Advertising_Create_Sync command.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Introduce Kconfig for Read ISO Link Quality command. Support for the
command is optional according to the specification.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Reorder variable declarations in HCI command handlers of ISO-related
commands to conform to reverse Christmas tree style.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Fix use of handle field in HCI command handling for some ISO-related
commands. The response buffer may reuse the command buffer. Therefore,
the handle field must not be copied directly from the command to the
response.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Set bits for ISO-related supported commands depending on selected
features and adjust compilation guards for the respective handler
functions.
Signed-off-by: Wolfgang Puffitsch <wopu@demant.com>
Implement support for Periodic Advertiser List to be used
in LE Periodic Advertising Create Sync command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Have separate Bluetooth Device address get and read
functions, remove use of function just to return Extended
Advertising Random address and replace with simple
assignment statement.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Align with the new inclusive naming terms in the v5.3 spec in the
controller's HCI implementation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix incorrect calculation of received common extended header
length. Due to this a zero length advertising data is
reported in Extended Advertising and Periodic Advertising
report as one byte AD data.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
