Rename mics => micp_mic_dev (MICP Microphone Device)
Rename mics_client -> micp_mic_ctlr (MICP Microphone Controller)
This does not change any lines in the code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Use the profile abbreviation, MICP, instead of the
service abbreviation, MICS, for the MICP implementation.
The server implementation will use MICP and the client
implementation will use MICP_CLIENT for now, as that will
be updated in a future commit.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This adds initial support for Hearing Access Service client. The client
performs GATT discovery to find and read HAS related characteristics and
subscribe for characteristic value notifications/indications.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This is the opesite of the macros to build codec configurations.
As some information was not up-to-date with the adopted
specification this change also includes alignment of the assigned
numbers in the Generic Audio section.
The codec config macros currently in lc3.h have moved from LC3
codec config parameters in the older specification to generic
codec configuration parameters in the adbpted specification.
This is why these additions have been made in the audio.h API
file rather in lc3.h. It is the expectation that lc3.h will be
merged into audio .h at some point.
Signed-off-by: Casper Bonde <casper_bonde@bose.com>
Add the telephone bearer service server implementation.
This support multiple service instances as well as the
generic telephone bearer service, but is still a work in
progress and should be treated as such.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add Kconfig file for the media proxy, for high-level media control
configuration.
The media proxy did not have a Kconfig file, it was relying on the
Kconfigs for GATT media control client and server.
The purpose is to unify the media control configurations, to make the
different media control functionalities available separately, and to
separate the high-level media control from the bluetooth media control
server and client.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Separate out the Kconfig for the media player.
Also removes some unused MCS configs.
The media player has been using MCS configs, while it should be the
other way around.
Also, this will make it easier to move the media player elsewhere, as
has been discussed.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This adds bare minimum implementation of Hearing Access Service.
The GATT HAS service contains one Hearing Aid Features mandatory
characteristic.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Refactor the PAC location read and write. Instead
of storing the location in the service, the
location is now stored in the application, and
is retrieved by the service via callbacks.
Similarly, if a client writes the location, this
request is being sent to the application.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS client implementation
This is a standalone implementation that
needs to be (heavily) modified for the
broadcast assistant role in the future.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BASS as a standalone service. The service is
used for the scan delegator role, which has not been
fully implemented yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for the BAP broadcast sink role. This role
allows a device to sync to a broadcast ISO stream.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BAP unicast client implementation. This role
can discover BAP unicast server services and initiate
BAP audio streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the Basic Audio Profile (BAP) unicast server
functionality. This allows a device to act as the
unicast server role, which can accept unicast streams
initiated by a unicast client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds the Media Control Service, and a dummy media player,
from the topic-le-audio branch. This is a part of the upmerge of the
le-audio media control files.
This service has been developed and maintained over a couple of years
now, and is mature. During the development it has passed both
IOP-testing and PTS qualification testing.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
- copyrights have been updated
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the media proxy from the topic-le-audio branch.
This is a part of the upmerge of the le-audio media control files.
The media proxy adds a common API to register and access local media
players, and to discover and access remote media players over
bluetooth using the media control client and a remote media control
service.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the Media Control Client from the topic-le-audio
branch. This is a part of the upmerge of the le-audio media control
files.
This client has been developed and maintained over a couple of years
now, and is mature. During the development it has passed both
IOP-testing and PTS qualification testing.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
- a macro for debug output of Object ID values has been (temporarily)
added to mcc.h, to avoid a dependency
- a blank line added after a declaration and an overlong line split,
to pass check_compliance
- copyrights have been updated
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the Object Transfer client from the topic-le-audio
branch. This is a part of the upmerge of the le-audio media control
files. Media control depends upon Object Transfer for feature
completeness.
This client works, and has been used for IOP- and PTS-testing of the
media control server and client. It does, however, need an overhaul
before being made "Zephyr official", so for now it will be kept as an
internal file to the le-audio code.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
an include path updated as a consequence
- a sa consequence, CMake files and Kconfig files updates are done in
other locations
- In otc.c a superfluous semi-colon has been removed to please
check_compliance
- Kconfig.ots has been renamed to Kconfig.otc, as there is only
otc-content left in that file
- copyrights have been updated
- add TODO that these files are to be cleaned up and moved
The Object Transfer Client in this commit was originally written by
Leif Aschehoug <Leif-Alexandre.Aschehoug@nordicsemi.no>.
It has later been updated and maintained by
Emil Gydesen <emil.gydesen@nordicsemi.no> and
Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
ots
Adds the coordinated set identification service (CSIS) client.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) server.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds the content control ID (CCID) module from the
topic-le-audio branch. This is required to the le-audio media control
files and call control files, which depend upon CCID.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
The CCID module is written by
Emil Gydesen <emil.gydesen@nordicsemi.no>
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Make subsys/bluetooth/audio build as a static library.
This is in preparation to enable building the bluetooth
drivers as a static library. That would change the line
"zephyr_include_directories(subsys/bluetooth)" where
this include path is applied to all code compiled.
Its removal will result in subsys/bluetooth/audio not
able to find subsys/bluetooth/common/log.h. So change
subsys/bluetooth/audio to be built as a static library
so it can link to the subsys/bluetooth library where
it can find "log.h" there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit implements the microphone input control service
(MICS) and client, The implementation supports and uses the
Audio Input Control Service (AICS) secondary service.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit implements the volume control service (VCS) and
client, The implementation supports and uses the
Audio Input Control Service (AICS) and
Volume Offset Control Service (VOCS) secondary services.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit implements the secondary service
Audio Input Control Service (AICS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fix bluetooth audio compilation issue when BT_AUDIO is enabled but
no Bluetooth host services has been enabled.
This leads to an empty library file.
Instead of creating a new library for audio add the sources to the
parent library, similar to how bluetooth services are added.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit implements the secondary service
Volume Offset Control Service (VOCS) server and client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
