Strictly restrict AD Data length to BT_CTLR_ADV_DATA_LEN_MAX
when there can be free bytes in Advertising PDU with common
extended header format of less that the maximum 64 bytes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In a function pu_prepare_instant there is a condition that
checks if there is actual change of a PHY. That condition
was based on ctx->data.pu.tx and ctx->data.pu.rx.
These members store PHY that is or will be used, hence
the condition is wrong. Even there is no actual change in
the PHY, values could be not equal to zero. In such case
the instant value would be set to wrong value.
What more the condition be an 'or' not an 'and' because
one of the values must be different than zero to have the
PHY change and instant different than zero.
After update of the condition, the function call places
must be changed. The ctx->data.pu.c_to_p_phy and
ctx->data.pu.p_to_c_phy are set in pu_prepare_update_ind
function, hence pu_prepare_instant should be called after
that.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
- ISO TX data path for HCI and support for vendor path
- ISO-AL segmentation of framed PDUs
- Insertion of segment headers
- Reconstruction and storing of CIG reference point in ULL
- Calculation and insertion of of Time-Offset
- Exit error spooling in ISO-AL on detecting start
- ISO-AL TX unframed fragmentation
Signed-off-by: Nirosharn Amarasinghe <niag@demant.com>
Signed-off-by: Morten Priess <mtpr@oticon.com>
Add implementation to generate node rx for missing ISO PDUs
and set the status as invalid. This is required for ISOAL to
correctly track the sequence numbers for every SDU interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In case a connection is encrypted received PDU is decrypted by CCM.
CCM does not encrypt/decrypt S1 byte that stores CTEInfo.
In case of reception of a PDU by encrypted connection there is missing
CTEInfo in a memory where CCM stores decrypted PDU.
The CTEInfo data must be copied from scratch packet.
The commit adds code responsible for copying of the CTEInfo into
target PDU memory.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add a greedy option to pdu_is_expected() to make sure the procedure
processes all unexpected control PDU in all cases.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/CEN/BV-14-C,
Central Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add support for both LL_REJECT_IND and LL_REJECT_EXT_IND when waiting
for the the response to the LL_ENC_REQ and LL_START_ENC_REQ.
Add unit test to test both LL_REJECT_IND and LL_REJECT_EXT_IND as
responses to LL_ENC_REQ.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Chose correct rejection PDU based on features supported on remote peer
when rejecting due to missing LTK.
Update unit test setup with faking that a feature exchange procedure
has run.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/PER/BI-05-C,
Peripheral Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
This adds suport for validation of received PDUs before they are
pass further to LLCP state machines. If PDU size is invalid it is
rejected with LL_UNKNOWN_RSP.
This was affecting following qualification test cases:
LL/PAC/PER/BI-01-C
LL/PAC/CEN/BI-01-C
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Instead of waiting one connection interval, as a result of the state
change, perform the check for instant already on reception of
CONNECTION_UPDATE_IND
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Compile out misc. members not used when Connection Parameter Request
is not supported.
Implement missing tests re. unsupported features in CU/CPR procedure
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
When a running procedure receives a REJECT or UNKNOWN_RSP PDU that is
not an expected part of the procedure flow this leads to termination
of the connection
This affects procedures:
CU/CPR, CTE, PHY, PING, DLE, FEX, VEX, CHMU
Unit tests are updated to cover the updated behaviour.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Rewrite the entire Procedure Response Timeout mechanism.
Use two separate timers for local and remote initiated procedures.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
As per bluetooth spec Vol. 6 part B section 5.3 we need to terminate
the connection under given situation
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
BT Core spec 5.3 Vol 6, Part B section 2.4.23 LL_PHY_UPDATE_IND says:
"If both the PHY_C_TO_P and PHY_P_TO_C fields are zero then there is no
Instant and the Instant field is reserved for future use."
Fields that are reserved for future shall be filled with zeros.
New LLCPs implementation didn't handle this case and set the instant
as if there were a PHY change. That caused qualification tests to fail.
The commit fixes the issue.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The Tx interval is now calculated at the beginning
of the Tx test and the next transmission is
triggerd by the switch timer instead of event
timer. This fixes a corner case issue when
timer rollover.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
When Host calls HCI_LE_Connection_CTE_Request_Enable with cte type
set to AoD with 1us slots or AoD with 2 us slots, the Controller
verifies if peer device supports Antenna Switching During CTE
Transmission (AoD) feature.
That is wrong because the feature is marked as optional when send
to peer, so it shall be igonerd by remote device.
There are no means to check if peer device supports particular
CTE type, hence the check has to be removed.
The check causes enable CTE REQ procedure to fail after feature
exchange has happened.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The CTE request procedure can be run in periodic and non-periodic mode.
In periodic mode it stays enabled until Host call HCI_LE_Connection_CTE-
_Request_Enable(Enable=0x0).
In non-periodic mode the command is disabled after completion,
LL_CTE_RSP is successfully received.
There is missing disable of the procedure in the current code,
so Host is not able to run the command HCI_LE_Connection_CTE_Request_-
Enable(Enable=0x1) again without explicit call to HCI_LE_Connection_-
CTE_Request_Enable(Enable=0x0).
The commit adds missing code responsible for disable of the procedure.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Fix assert on LL BIG terminate call before BIG sync is
established. Assert was caused due to duplicate calls to
release stream contexts, once in LL BIG terminate function
then when releasing the HCI BIG sync failed to be
established node rx was being released.
Use iso_broadcast and iso_receive samples, power cycle the
iso_broadcast device when iso_receive sample is waiting for
BIG sync to be established, iso_receive sample will perform
a BIG sync terminate that leads to the assert.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PR44014 introduced new pause logic for procedures but PR44297
was merged without being update to use it.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Now refactored Connection Parameter Request procedure supports
parameter checking, and implements reject_ext_ind on invalid parameters
Updates to TODO description for remaining work
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The event counter value for connection and periodic advertising
events is updated to next value during event preparation (in one
of prepare_cb functions in LLL).
IQ report is prepared after event preparation, so value of event
counter is ahead of the current event value by one, hence it has
to be subtracted.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Connectionless_IQ_Report and HCI_LE_Connection_IQ_Report
events has fields that store event counter values: Periodic_Event_-
Counter and Event_Counter, respectively.
Values assigned to this HCI events are taken directly from
lower link layer objects. In case of too slow processing of
HCI events values provided by LLL contexts could be changed before
HCI sends events to Host. That can happen e.g. in case of short
periodic advertising interval and slow UART baudrate.
In such situation event counter values will be corrupted.
To prevent that situation, event counter values connected with
IQ sample reports, has to be stored in node_rx_iq_report when
a report instance is filled in LLL.
This commit introduces required changes.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add implementation in Controller to set radio high voltage
to enable support for +3dBm Tx Power in nRF53 Series SoCs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add radio_stop interface that will be called on radio event
done. This interface can be in turn used to perform H/w
dependent cleanup for every Radio event done.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When an int16_t I or Q value was input to IQ_CONVERT_12_TO_8_BIT
the compiler would not make the correct comparison with
IQ_SAMPLE_STATURATED_16_BIT causing saturated IQ samples never
being found.
Signed-off-by: Jakob Krantz <jakob.krantz@u-blox.com>
Fix Extended Scan disable and Periodic Synchronization
terminate to cover scenarios where chain PDU reception could
complete while thread context is waiting for the radio event
to be done.
Changes here ensure auxiliary context is not released twice
which is caught as an assertion in flush() when checking for
validity of aux->parent pointer.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing return value check when Periodic Synchronization
Auxiliary PDU reception has already been stopped, this can
be due to PDU reception in LLL completing while stop has
been requested.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add additional assertion check in the control path leading
to auxiliary context release to catch regressions that may
lead to duplicate auxiliary context release.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing execution of Tx demux for LOW LAT ULL variant
which caused connection events not being maintained to
transmit the latest Tx Data enqueued while being inside a
connection event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
There was an extra call to llcp_lr_init and llcp_rr_init, which is
removed in this commit
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
llcp_lr_pause()/llcp_rr_pause() only pauses currently pending procedures
in their respective request machines, any future initiations are not
paused, thus they are allowed to run, when the opposite was expected.
Change the procedure pause logic into a global pause on the request
machines them self, this is essence what the per-procedure pause
flag was trying to achieve.
Add new query function llcp_?r_ispaused() to not expose the logic behind
the pause functionality.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Change LLCP TX data pause into using mask to allow for pausing from
multiple different sources - but only once per source
(the underlying TX queue still just has an integer counter).
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
The PHY update procedure may trigger a DLE update in certain
situations
When a limited number of rx buffers is available there may not be
enough for doing the phy update and dle update notifications
at once.
Fixes#41788
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Rewrite ull_cp_rx to handle the following cases:
(1)
Local active procedure
Unexpected local procedure PDU
Remote active procedure
Unexpected remote procedure PDU
=> Invalid Behaviour
(2)
Local active procedure
Unexpected local procedure PDU
Remote active procedure
Expected remote procedure PDU
=> Process PDU in remote procedure
(3)
Local active procedure
Expected local procedure PDU
Remote active procedure
Unexpected remote procedure PDU
=> Process PDU in local procedure
(4)
Local active procedure
Expected local procedure PDU
Remote active procedure
Expected remote procedure PDU
=> This cannot happen
(5)
Local active procedure
Unexpected local procedure PDU
No remote active procedure
=> Process PDU as a new remote request
(6)
Local active procedure
Expected local procedure PDU
No remote active procedure
=> Process PDU in local procedure
(7)
No local active procedure
Remote active procedure
=> Process PDU in remote procedure
(8)
No local active procedure
No remote active procedure
=> Process PDU as a new remote request
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Fix connectable advertising to not use uninitialized
secondary PHY value to set the max_tx_time and max_rx_time
for a non-extended connectable advertising context.
The symptoms being Data Length Update event being generated
when peer central initiated Data Length Update Procedure
does not change from default 27 byte 328 us values.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Offset the Coded PHY scan window by 1M PHY scan window
duration so that when 1M PHY scan window is less than
scan interval then Coded PHY scan window can utilize the
radio thereafter for its scan window duration. For
example, with 20 ms interval and 10 ms window there can
be 10 ms 1M PHY followed by 10 ms of Coded PHY scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This fixes Radio Rx when switching back-to-back is
used and device support CTE. For the CTE reception we need to use
PHYEND->DISABLE short instead of END->DISABLE short.
Using NRF_RADIO_SHORTS_PDU_END_DISABLE short handles
both cases.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
