Adds new command that allows to retrieve MCUMGR parameters.
Currently the command returns MCUMGR buffer size and count.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Change CONFIG_BT_RECV_IS_RX_THREAD into a
choice:CONFIG_BT_RECV_CONTEXT with the following options
(names can be discussed further of course):
CONFIG_BT_RECV_BLOCKING
CONFIG_BT_RECV_WORKQ_BT
CONFIG_BT_RECV_WORKQ_SYS
This way users would be able to choose what to run most of
the BLE stack on, they wouldn't be forced to a single model.
We would default to CONFIG_BT_RECV_BLOCKING so that we wouldn't
need to change the system workqueue stack size by default, instead
asking users to do so if they select the CONFIG_BT_RECV_WORKQ_SYS option
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Introduce set/get SO_SNDBUF option using the setsockopt
function. In addition, for TCP, check the sndbuf value
before queuing data.
Signed-off-by: Mohan Kumar Kumar <mohankm@fb.com>
This commit changes the CODE_DATA_RELOCATON dependency by
adding CPU_AARCH32_CORTEX_R next to CPU_CORTEX_M.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Cortex-M code is the only flavor that supports switching between secure
and non-secure state so make sure this kconfig only applies to it.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Commit a2cfb8431d ("arch: arm: Add code for swapping threads between
secure and non-secure") changed the mode variable in the _thread_arch to
be defined by ARM_STORE_EXC_RETURN or USERSPACE. The generated offset
define for mode was enabled by FPU_SHARING or USERSPACE. This broke
Cortex-R with FPU, but with ARM_STORE_EXC_RETURN disabled. Reconcile
the checks.
Signed-off-by: Bradley Bolen <bbolen@lexmark.com>
Use shell_print_ctx macro when printing to shall from callbacks.
ctx_shell may not be initialized when callback is called.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Introduces H7 FMC bindings with support for
memory remap or swap configuration.
The following values are supported:
* disabled - default mapping (reset state).
* sdram-sram - swaps the NOR/PSRAM and SDRAM banks.
* sdramb2 - remaps SDRAM bank 2.
Signed-off-by: Georgij Cernysiov <geo.cgv@gmail.com>
DBGMCU register, which is used for SWO pin configuration,
may not have TRACE_MODE bits in some STM32 MCUs.
Replace register access with LL functions selected based on SoC family.
Fixes#44584
Signed-off-by: Alexander Vasiliev <alex.m.vasil@gmail.com>
Previously, MCUBOOT_DATA_SHARING was enabled when BL2 was built
and when the firmware update partition was present. This is not
the only situation that you might be interested in this data
sharing. The data sharing now has it's own Kconfig.
Further, use of the firmware update partition requires data
sharing, so it selects it.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Prior instructions were incomplete, included extra, unneeded ways to
build the app.
This should simplify the instructions.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Previously, you were required to set the image versions through the
CMake variables TFM_IMAGE_VERSION_{S,NS}. For better integration with
the rest of the zephyr build system, these are now KConfig variables
with the same name.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
This displays the secure firmware version before the nonsecure firmware
version at the beginning of boot.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Previously, the example was a scheleton. This patch
pushes firmware images with psa_fwu_write, and completes
the firmware update example.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
This commit adds a sample application demonstrating how to use
the PSA Firmware Update API from TF-M. It also enables the
`FIRMWARE_UPDATE` partition to be included at build time.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
'optval' in setsockopt(..., SO_BINDTODEVICE, ...) was casted explicitly
from 'const void *' to 'struct ifreq *'. Rely on C implicit casting from
'const void *' to 'const struct ifreq *' and simply update variable
type. This prevents unwanted modification of ifreq value in the future.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
Reuse switch statements checking valid parameter values that were
already part of simplelink_socket() function, by creating 3 helper
functions for conversion of each parameter (family, type and protocol)
from Zephyr to Simplelink values.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP, TCP and TLS on top of IPv4.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for TCP on top of IPv4 and IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP and TCP on top of IPv4 and IPv6.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Check if requested socket family, type and protocol are all supported by
the driver, instead of blindly acknowledging every possible variant.
There is explicit support for UDP, TCP and TLS on top of IPv4 and IPv6.
TLS seems to be supported only in 1.2 version, so allow just that
version.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Addiitonally this allows to select relative priority of offloaded TLS
versus native TLS when used together with NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Addiitonally this allows to select relative priority of offloaded TLS
versus native TLS when used together with NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use NET_SOCKETS_OFFLOAD_PRIORITY instead of
NET_SOCKETS_OFFLOAD_PRIORITY, so that by default offloaded sockets will
be used instead of native sockets.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use configurable NET_SOCKETS_OFFLOAD_PRIORITY instead of hardcoded value
in the driver itself. This allows to select relative priority of
offloaded TLS versus native TLS when used together with
NET_SOCKETS_TLS_PRIORITY.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Use configurable NET_SOCKETS_OFFLOAD_PRIORITY instead of hardcoded value
in the driver itself. This allows to select relative priority of
offloaded TLS versus native TLS when used together with
NET_SOCKETS_TLS_PRIORITY.
Drop the build assert, as always prioritizing offloaded TLS over native
TLS should be application developer choice.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This option will be used as default socket priority by offloaded socket
drivers.
Describe how to prioritize native TLS over offloaded TLS (and vice
versa) using sockets priorities.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Make sure that the test rules' `before` function runs before the
suite's. This allows the suite to override any defaults set by the
rule.
Signed-off-by: Yuval Peress <peress@google.com>
Added required config for the display operation and default display name
to "LTDC" for LVGL subsystem when the peripheral LTDC is used.
Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com>
LTDC clock on F4/F7 series, is generated from PLLSAI which yet is not
implemented into Zephyr.
Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com>
Onboard display is actually an ILI9341. It is connected to SPI5 which
is shared with L3GD20. Max clock is set as described in BSP driver files
(stm32f429i_discovery.c@638). ILI9341 configuration updated to enable
RGB interface use.
Signed-off-by: Konstantinos Papadopoulos <kostas.papadopulos@gmail.com>
the icm42670 from Invensense/TDK is a 6-axis accelerometer with
gyroscope and temperature sensing capabilities.
this initial driver does not support the devices 2K FIFO or many of the
other advanced features. Instead, only basic features are implemented.
Signed-off-by: Mikkel Jakobsen <mikkel.aunsbjerg@escolifesciences.com>
Under QEMU and SeaBIOS, everything gets to be printed
immediately after "Booting from ROM.." as there is no newline.
This prevents parsing QEMU console output for the very first
line where it needs to match from the beginning of the line.
So add a dummy newline here so the next output is at
the beginning of a line.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
