Port some drivers to the recently introduced macros to showcase its
usage and be able to do some initial testing (nRF52840).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The PM callback is no longer referenced as "pm_control" but
"pm_action_cb", so reflect this new naming on the callbacks.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Refactors the remaining display drivers that didn't already use the
shared driver class initialization priority configuration,
CONFIG_DISPLAY_INIT_PRIORITY.
Signed-off-by: Maureen Helm <maureen.helm@intel.com>
Model descriptions in Kconfig.ssd1306 should be ssd1306 instead of
ssd16xx, these may be copied from driver for ssd16xx.
Signed-off-by: Huang Qi <no1wudi@qq.com>
The st7789v_transmit function does not return any error code (void), so
ret = st7789v_transmit(...) is wrong.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
These are the only two display drivers initializing in APPLICATION.
Dependency exposed with LVGL with initialization at same level and
priority.
Fixes#38690
Signed-off-by: David Leach <david.leach@nxp.com>
Instead of putting object files inside libzephyr.a,
simply build a separate static library as most other
driver types are doing this already.
Also sort the entries alphabetically.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Some display drivers may actually be initialized after LittlevGL
as those drivers and LittlevGL's lvgl_init() all have SYS_INIT()
at APPLICATION and init priority the same as application init
priority. Depending on how the final binary is linked, these
drivers may initialize after lvgl_init() resulting in it not
able to find a display driver. This changes the value of
CONFIG_DISPLAY_INIT_PRIORITY so that the display drivers that
make use of this kconfig are initialized a bit earlier to
ensure that they are actually initialized before lvgl_init().
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This introduces a new kconfig CONFIG_DISPLAY_INIT_PRIORITY
to specify the initialization priority for display devices.
Most of the display devices are using APPLICATION and
CONFIG_APPLICATION_INIT_PRIORITY which is not entirely
appropriate for devices. Due to linking order, the display
device may be initialized after application code at same
init level and priority. This results in the display device
not ready to be used for application code. So this kconfig
option allows the display devices to be initialized earlier
if needed.
For the drivers using CONFIG_APPLICATION_INIT_PRIORITY,
they have been changed to use CONFIG_DISPLAY_INIT_PRIORITY
instead.
Note that the default value for CONFIG_DISPLAY_INIT_PRIORITY
is the same as CONFIG_APPLICATION_INIT_PRIORITY at 90 to
avoid any functional changes.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of passing target states, use actions for device PM control.
Actions represent better the meaning of the callback argument.
Furthermore, they are more future proof as they can be suitable for
other PM actions that have no direct mapping to a state. If we compare
with Linux, we could have a multi-stage suspend/resume. Such scenario
would not have a good mapping when using target states.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
- Return -ENOTSUP if the requested state is not supported
- Remove redundant "noop style" functions.
- Use switch everywhere to handle requested state (not necessary in all
drivers, but better take off with consistency in place after current
changes).
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Since the state is no longer modified by the device PM callback, just
use the state value.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The callback is now invoked to set the device PM state in all cases, so
the usage of ctrl_command is redundant.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The device PM subsystem already holds the device state, so there is no
need to keep duplicates inside the device. The pm_device_state_get has
been refactored to just return the device state. Note that this is still
not safe, but the same applied to the previous implementation. This
problem will be addressed later.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The config/data casts are not strictly necessary. Furthermore, config
was being casted to non-const.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Use the recently introduced struct gpio_dt_spec to store GPIO
information and operate with them.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The callback is not used anymore, so just delete it from the pm_control
callback signature.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
the device PM callback is not used anymore by the device PM subsystem,
so remove it from all drivers/tests using it.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Move all PM_DEVICE_STATE_* definitions to an enum. The
PM_DEVICE_STATE_SET and PM_DEVICE_STATE_GET definitions have been kept
out of the enum since they do not represent any state. However, their
name has not been changed since they will be removed soon.
All drivers and tests have been adjusted accordingly.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
For some reason a few drivers were not converted to the new device PM
callback signature. The reason may be because the device PM part is
compiled only when CONFIG_PM_DEVICE=y, a condition not enabled in CI by
default.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
The context parameter used across device power management is
actually the power state. Just use it and avoid a lot of
unnecessary casts.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
First version of a driver for the st773r LCD controller.
Based on st7789v
Signed-off-by: Kim Bøndergaard <kim@fam-boendergaard.dk>
Signed-off-by: Kim Bøndergaard <kibo@prevas.dk>
Add a new display-inversion property to ili9xxx based display drivers to
send a "Display Inversion ON (0x21)" command during initialization.
This seems to be required for some ILI9xxx based displays to work
correctly, such as BuyDisplay ER-TFT028A2-4 (ILI9341 basd IPS display).
Signed-off-by: Fabio Baltieri <fabio.baltieri@gmail.com>
Convert driver(s) to DEVICE_DEFINE instead of DEVICE_AND_API_INIT
so we can deprecate DEVICE_AND_API_INIT in the future.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
- Remove SYS_ prefix
- shorten POWER_MANAGEMENT to just PM
- DEVICE_POWER_MANAGEMENT -> PM_DEVICE
and use PM_ as the prefix for all PM related Kconfigs
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the core k_heap API pervasively within our tree instead of the
z_mem_pool wrapper that provided compatibility with the older mempool
implementation.
Almost all of this is straightforward swapping of one alloc/free call
for another. In a few cases where code was holding onto an old-style
"mem_block" a local compatibility struct with a single field has been
swapped in to keep the invasiveness of the changes down.
Note that not all the relevant changes in this patch have in-tree test
coverage, though I validated that it all builds.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Make driver generic for multiple ILI displays. The adopted strategy is
to share all driver code except register initialization, which has been
found to have some specific registers/values depending on the
controller.
The driver has been adjusted to support multiple compatibles.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
For drivers that support CONFIG_DEVICE_POWER_MANAGEMENT there are some
cases that look like:
#ifdef CONFIG_DEVICE_POWER_MANAGEMENT
DEVICE_DEFINE()
#else
DEVICE_AND_API_INIT()
#endif
There is no need to special case this as the pm_control_fn argument to
DEVICE_DEFINE will just be ignored in the
!CONFIG_DEVICE_POWER_MANAGEMENT case. So we can cleanup the code a
little and remove the #else cases for the drivers that do this.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Align register names with the ones found in the datasheet. It is easier
to follow datasheet if names are the same.
Some other minor enhancements have also been introduced (comments, use
BIT for bit fields...).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove two operation flags in the SPI configuration
instance, which disturb software controlled chip select
lines (CS never gets released).
Signed-off-by: Marco Peter <marco@peter-net.ch>
