Looking at all structs as to where we can pack them a little better, and
calling out the padding/stride at the end for future expansion.
Change-Id: I4a651092e950dd3d915af9fa0ee0d7d59803e58f
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ source files.
Change-Id: Ia4db0c36a5dac5d3de351184a297d2af0df64532
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
This adds driver for the UART controller on Atmel SAM3X8E.
This UART controller only has two wires for RX and TX, and
does not have flow control (e.g. CTS, RTS) or FIFO.
Currently, the driver does not support any interrupt driven
operations.
Change-Id: I63720bccfb70a89888353b8ee3dfc4b80793dc01
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This API is not being used for anything, the interrupts for UART
drivers are all being configured statically. Saves code space as
gc-sections can't tell that these APIs are unused.
Some instances where IRQ/priority information was being saved in
data structures and never used fixed.
Change-Id: If56b4fdc251b80be9094ffcbac6f61e265ac2ffd
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This implements the newly introduced APIs to manipulate line controls
for UART.
This also implements the driver command API as setting baud rate
may require setting the DLF.
Change-Id: I80634aa3fbd4a3223c46edb61417123e36f439dd
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds 2 new APIs to the serial/uart drivers:
() One is to control the serial line, such as RTS and CTS.
() Another one is to allow driver to expose hardware specific functions
to apps. This is needed as some hardware may have extra registers to
set for baud rate.
To keep the code size small, these features are disabled by default.
Change-Id: I15c000ce68a0a490dcfd3493b2fe9bc51fa974fa
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the baud rate and options fields out of the UART driver
config struct and into the driver data struct. This will allow
changing baud rate and options at runtime in the future.
Change-Id: I62ddea2f95e634f2d60eeb9537f960799fc9301f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The UART on Quark SE and D2000 supports fractional clock divider.
It is used to limit frequency error for supported baud rates.
Change-Id: I1f39a95db09f4a5a4116edc700a10e4b9ecfa2bd
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rename class in pci_dev_info struct to allow to use C++ compilers.
Updated drivers to use new struct.
Change-Id: I17b94cb7bc094bccd615c8389a28589bfa90cab8
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Only the first port is currently enumerated on the PCI bus. As a result,
the second port configuration will be set based on the default options,
that may be invalid on some platforms.
Fix this by enumerating the second port as well.
Change-Id: I63733a1f13f7cb35cae1dba3b6192dcd61c9f644
Signed-off-by: Ido Yariv <idox.yariv@intel.com>
Signed-off-by: Ido Yariv <ido@wizery.com>
Change terminology and use SoC instead of platform. An SoC provides
features and default configurations available with an SoC. A board
implements the SoC and adds more features and IP block specific to the
board to extend the SoC functionality such as sensors and debugging
features.
Change-Id: I15e8d78a6d4ecd5cfb3bc25ced9ba77e5ea1122f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The code to poke the system integration module to disable clock gating
for UARTs only works for UART0-3 since all the bits are in the same
register. However, clocks for UART4 and UART5 are controlled by
another register. This means that we have been writing to the wrong
bit for enabling UART4.
This patch fixes this issue, and moves the clock gating clock into
board initialization. The incorrect code has also been removed to
prevent accidental mis-use. The dev_data struct is no longer needed
for uart_k20, so that is removed as well.
Change-Id: I67845a417e43647bf0ffcbdbda34ce68fa887713
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of having two config options to specify interrupt triggering
conditions, merge them into one option and clarify. This is now
similar to other drivers which have interrupt triggers.
Change-Id: I4e60c8c45a08d005dcc8256cb89e4c5be7c94307
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds CONFIG_UART_NSIM to enable the uart/nsim driver.
This fixes compilation issue where the base address parameter
is not defined due to CONFIG_NSIM=y but CONFIG_SERIAL=n.
Change-Id: I1dc1c15b22ad174d4db514d89551780f0dfcae66
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since all the necessary bits utilizing UART by index have moved to
use device name instead, the uart_devs[] can finally be removed.
Change-Id: Idbae6b46c0af9eef6c22c59e121e9d6a6b52426a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove unused code after refactoring all the serial/UART drivers.
() Since device initialization is done by the drivers themselves,
there is no need to have config_func(), port_init() and uart_init()
to perform configuration external to driver. So remove the related
bits.
() The IRQ priority is only being used when doing IRQ_CONNECT_STATIC().
So there is no need to send it over during uart_init().
Change-Id: I72eb3402036b53cbc01c1eb968de0ddfa0096ee2
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the initialization is now done within driver, there is
no need to expose the port_init() function externally anymore.
After the consumers of port_init() have been updated. It is time
to perform the final step.
Change-Id: Ibe22c6d1dc9525c845acc094fa2066c922439ec3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the initialization is now done within driver, there is
no need to expose the port_init() function externally anymore.
After the consumers of port_init() have been updated. It is time
to perform the final step.
Change-Id: Iba7aeb056edd63ef3f9b47d3801a3e0eeb9b34d5
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since the initialization is now done within driver, there is
no need to expose the port_init() function externally anymore.
After the consumers of port_init() have been updated. It is time
to perform the final step.
Change-Id: I4e0d0a6802ddda4a6671c6d246233eaa5074d4ff
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rename nsim_uart.c to uart_nsim.c. This is to follow
the driver naming convention.
() Rename functions nsim_uart_*() to uart_nsim_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If015f39a6f6b4fcc65625e6e5f973b4469202f54
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Renames stellarisUartDrv.c to uart_stellaris.c. This is to follow
the driver naming convention.
() Renames functions stellaris_uart_*() to uart_stellaris_*(),
following driver naming convention.
() Renames CONFIG_STELLARIS_UART* to CONFIG_UART_STELLARIS*
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: I0eadc3878d69ff24d1637f8df5220fd2f161d24f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Rename k20UartDrv.c to uart_k20.c. This is to follow the driver
naming convention.
() Move driver/serial/k20_uart.h to drivers/serial/uart_k20_priv.h
as this contains definitions private to the driver, and
should not be exposed in public include directory.
() Rename functions k20_uart_*() to uart_k20_*(), following
driver naming convention.
() Renames CONFIG_K20_UART_* to CONFIG_UART_K20_*
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
Change-Id: If1be1fde083aba6ff68062db2059aef08617a286
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
() Renames ns16550.c to uart_ns16550.c. This is to follow
the driver naming convention.
() Renames functions ns16550_uart_*() to uart_ns16550_*(),
following driver naming convention.
() UART ports initialization is moved into the driver itself.
All the init code in platform config files is removed.
() Adds (many) Kconfig options. These don't have to be defined
in each platform's board.h anymore.
() Renames CONFIG_NS16550_* to CONFIG_UART_NS16550_*
() Disable NS16550 for ARC as no port is defined anyway.
Change-Id: I76bbe25b9bc75eb62df81e533f84f4f63a5257b7
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to a quirk of the k20 UART, when checking if either a Tx or Rx
irq is ready, one must first check whether the UART has enabled the
Tx and/or Rx interrupts. If this is not done, then all one is doing
is testing the UART to determine if it is ready to Tx and/or Rx.
Change-Id: I08a8280ed9fb0faef586f3c7d7befb3bfdec1e2d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes the logic in the routine k20_uart_fifo_read() so that it reads the
data from UART if the status register 1 indicates that data is available.
Change-Id: I1722b013e05c7477587c07f5a0b90c753ba34aab
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removing many of the typedefs that are only used once to lessen the
checkpatch warning about creating new typedefs. A handful have been
behind as they would require a more invasive change to the code. It
has yet to be determined if this is a worthwhile endavour.
Change-Id: Ibeb29e0a1d37e8121218fccf0d986cbebd226e85
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Only driver specific public headers should be found in include/drivers.
All generic API are found in include/ directory.
Change-Id: Ic50931987bb9460fd4a3843abc6f5de107faf045
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Both poll_in and poll_out are supposed to be implemented
in each driver, as these are basic function.
Change-Id: If1b6b11834f57934fe7e776bfcf818e088abdd0a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Those ports uses different instructions to get accessed: in/out
instructions. It differs in many ways with memory access, and it's much
slower. It's unset by default, but some arch exposing legacy UART ports
might need it.
Change-Id: I06f2a7c7812e720863957bd20d5c2b8b02c10734
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Menu depends on X86, however some options are available
for all architectures.
Change-Id: I09cad39811319022d0323a4ff87d415346b5630a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will let us getting rid of old outByte/inByte functions.
Change-Id: I3344151c54f99e5e281ac8d3d027e0b810796111
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Change-Id: I151b3c6516b9b5a38ab0da2948c951eb69d57498
Signed-off-by: Adrian Pochiu <adrianx.pochiu@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updates the documentation as the quark platform configuration had been
previously renamed to 'galileo'.
Change-Id: I31e1920f30f57b243b07215fe92be08b5e5c9d59
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
- Makes the code simpler in driver side
- Configuration is done on platform's config.c file and not the driver
- Handles CONFIG_PCI_ENUMERATION setting
Change-Id: I9b8376cebd7e0b62279251da132a2c4ee7b2e148
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be useful for PCI based drivers to integrate fully within
the device driver model, where they will have to provide the function
they are found.
Change-Id: I7d64a4c6727cee52cbcb743c859cda43ac1a853b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Converts the file description to doxygen format, and updates
the information inside. Also removes empty lines.
Change-Id: I3866843a31e30e1dd464b27cafc830900d8dce4f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Clean up variables and function arguments to conform to coding style.
Also align the function argument list.
Change-Id: I49eff429bfa369c8a544d8171e35a41523995aa3
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Converts the file description to doxygen format, and updates
the information inside. Also removes empty lines, updates
the comments for function, and adds missing comments.
Change-Id: I7610e8667cd85feb0c4c853b44880f7e29b6c05a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Clean up variables and function arguments to conform to coding
style. Also align the function argument list.
Note that this only changes the parts related to UART.
Change-Id: I84a6ba88963784f6ddc77d5bda653a7d2de6a72b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Converts the file description to doxygen format, and updates
the information inside. Also removes empty lines, and updates
the comments for function.
Change-Id: I97672996510fec1c92a30f78d6f088f02279fb44
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
