Commit graph

13 commits

Author SHA1 Message Date
Jukka Rissanen
d003d0e6a6 net: ipv4: Corrupted ARP pkt was sent instead of real IPv4 pkt
The ethernet sending routine sent a corrupted ARP packet instead
of the actual IPv4 packet.

Fixes #9348

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-08-09 11:56:44 +03:00
Jukka Rissanen
1f855095b4 net: l2: Add promiscuous mode to L2 flags when applicable
This allows more bearers than just ethernet to have promiscuous
mode support.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-08-08 11:02:30 +03:00
Jukka Rissanen
ccfcdabaf6 net: l2: Add flags to tell if L2 supports multicast
If multicast is not supported, then we do not need to join
multicast group.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-08-08 11:02:30 +03:00
Jesus Sanchez-Palencia
598276262c net: l2: Add support for Link Layer Discovery Protocol (LLDP)
The LLDP protocol defines 2 separate agents, the Transmitters and
the Receivers. For the context of Zephyr, we are only interested in
the Tx agent, thus we drop any LLDP frames received by Zephyr.

LLDP frames are basically composed by an ethernet header followed by
the LLDP Protocol Data Unit (LLDPDU). The LLDPDU is composed by several
TLVs, some of them being mandatory and some optional.

Our approach here is having TLVs fully configured from Kconfig, thus
having the entire LLDPDU constructed on build time.

The commit adds NET_ETH_PTYPE_LLDP definition and related handling.

If CONFIG_NET_LLDP is enabled then ethernet_context has a pointer to
the struct net_lldpdu that belongs to that ethernet interface. Also
when CONFIG_NET_LLDP is enabled, the LLDP state machine will start to
send packets when network interface is coming up.

Currently the LLDP state machine is just a k_delayed_work() sending the
LLDPDU at a given period (defined by CONFIG_NET_LLDP_TX_INTERVAL).

Fixes #3233

Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-08-08 09:53:24 +03:00
Jukka Rissanen
bab35512f8 net: ipv4_autoconf: Fix requested IPv4 address in ARP packet
Unspecified address 0.0.0.0 was used as a requested IPv4 address
because the ARP message was generated second time. So for IPv4
autoconf ARP message, generate the message only once.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-08-02 12:42:52 +03:00
Jukka Rissanen
00e37cbb5b net: IPv4 link local support
Add basic IPv4 Link Local support as described in RFC 3927.

Signed-off-by: Matthias Boesl <matthias.boesl@gmail.com>
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-07-31 16:34:28 +03:00
Jukka Rissanen
9ffab9e63a net: arp: Fix ARP message sending if VLAN is enabled
VLAN tags were not set properly for ARP messages.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-07-30 12:47:02 +03:00
Jukka Rissanen
bf9bae58d1 net: eth: Add generic promiscuous mode support
Allow ethernet L2 driver to set / unset the device driver
promiscuous mode flag.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-07-24 15:12:37 +03:00
Jukka Rissanen
65b15c3226 net: eth: Add helper to return VLAN info for an interface
A small helper function will return information whether
a given network interface has VLAN enabled or not.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-07-03 20:26:31 +03:00
Jukka Rissanen
3fd2d53e56 net: mgmt: Add VLAN enabled / disabled event support
Send network management event if VLAN tag is enabled or disabled.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-07-03 20:26:31 +03:00
Tomasz Bursztyka
89eeba4250 net/arp: No need to expose publicly arp header
ARP is something internal to ethernet L2, let's just hide its header
file.

Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
2018-06-29 12:57:45 +03:00
Jukka Rissanen
45b06a252f net: gptp: Initial core IEEE 802.1AS support
Core IEEE 802.1AS-2011 (gPTP) support and application interface.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Julien Chevrier <julien.chevrier@intel.com>
2018-06-28 16:50:50 +03:00
Jukka Rissanen
8ae6bad21d net: l2: Move the layer 2 code into subsys/net/
The subsys/net/ directory is more logical place for L2 code instead
of ip/ directory. No functionality changes by this commit.

Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
2018-06-27 17:02:59 +03:00
Renamed from subsys/net/ip/l2/ethernet/ethernet.c (Browse further)