zephyr.h includes required headers and has guards for unified kernel
config.
Change-Id: I40b5d95218cee5594c06e5ba3de496a0aca16f2c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Insufficient authentication can be used with almost any security level to
indicate the security need to be escalated not only to high but to medium
and fips depending on the current security level.
Jira: ZEP-1074
Change-Id: Iea261f2814caf5b290997beedcbb0aa7f5a9e890
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Removes the code responsible for reset channel object internals. These
internals will be reset automatically on chan 'destroy' ops as a result
of disconnection that taking place in this case.
Change-Id: I7bb3aaf225797a7c4b17ed2b578f6825114307c9
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Reduces code in main handler servicing connection request by use of helper
routine l2cap_br_conn_req_reply() to send connection response. It
involves moving the helper up in code to skip forward declaration and also
makes slight refactor of it to adjust 'pending result' condition in response.
Change-Id: I0a51d908b14ed3b5d6c497d57a99422fc9c44573
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Since for LE CoC connection response 'result' errors can have different
values and semantics this adds proper, according to Core Spec 4.2 [Vol 3,
Part A, 4.3], values relevant for BR/EDR L2CAP CoC 'result' field
in connection response protocol package.
Change-Id: Ie43c87466aaaf47e16520795f3cb7335d86aa57d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Add a new sample application in sample/bluetooth/hci-uart
that acts as a bridge between a UART and the BLE Controller.
It receives commands and ACL data in H4 format over the UART
and passes them on to the BLE Controller to be processed.
It also conversely forwards all events and incoming ACL data
generated by the BLE Controller to the UART.
The application uses the hci_raw interface to pipe the data
to and from the BLE Controller and UART.
Change-Id: Iff7696166a82fe363b2ad4e1abea40103899f927
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds internal helper routine sending response to connection request when
BR/EDR CoC channel operates in acceptor role. The routine additionally
can drive the response 'result' value for failure reasons.
Use it then to adjust 'l2cap_br_conn_pend' function to accept remote's
connection request.
Change-Id: I906e07e30939c57b206e9806426897f6e4f2b3dd
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
BT_L2CAP_MAX_LE_MPS tracks exactly how big a single buffer can be so use
that as size for outgoing segment pool instead of the minimun MTU.
Change-Id: I48cfba0e2c4c88f390f2f8a1ce63ff6adfce7c7a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net_buf_frag_add already adds a reference to the fragment.
Change-Id: I28c6bde862c09d1dea0182bc0d08bfc1f4565d06
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Buffer with fragments shall not be reused as they may free unprocessed
fragments on unref.
Change-Id: I09bdc84ccaef03a99d53d87b2b70c8c3a32b5e90
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Instead of requesting the full length just request one buffer at time.
Change-Id: I8f97ecf0a959316e1fadfdedf9e500e61ed26c27
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This change adds support for registering new service records.
Change-Id: I0ff2264d08787fe5f8edf6300259961c3ca52fbb
Signed-off-by: Kaustav Dey Biswas <kaustav.d.biswas@intel.com>
Adds helper defines to mark valid CID values and ranges for CoC on BR/EDR
and LE.
Change-Id: Ib2db3a6a8f4b6565920f47b520e27e3b8cc6c85c
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There's no need to keep the custom swap_buf & swap_in_place helpers
anymore since system-wide helpers are now available.
Change-Id: I424e3592ab955410455c4226e5bf03df6f522c52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Bluetooth initialization now also sets the page timeout value.
Change-Id: I367591c587bdfe135befc07b637af4cf532f55e2
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
Added an option to set the page timeout value. Default the timeout
is set to 5.12 sec.
Change-Id: I196b59f18b9cbf0aaa226ffd85e0bb1699667af2
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
Master is starting SMP over BR/EDR and it may not be a device that
started BR/EDR pairing. Although specification isn't very clear in this
it seems to be the case when checking TS for cross-transport tests.
Change-Id: I7b0a42ab0123fa444b06a4986f6b1410bf1f2789
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enabled L2CAP CoC to store data in fragmented buffers, due to
increase in memory init_17 test has to be disabled ARC for Arduino 101
otherwise sanity test would not pass.
Change-Id: If04289a03e591473de4e722031c1687a14420fc2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix following error if BR/EDR support was build without signing
support enabled.
CC net/bluetooth/smp.o
zephyr/net/bluetooth/smp.c: In function 'smp_br_signing_info':
zephyr/net/bluetooth/smp.c:1166:13: error: 'struct bt_keys' has no
member named 'remote_csrk'
memcpy(keys->remote_csrk.val, req->csrk, sizeof(keys->remote_csrk.val));
^
zephyr/net/bluetooth/smp.c:1166:54: error: 'struct bt_keys' has no
member named 'remote_csrk'
memcpy(keys->remote_csrk.val, req->csrk, sizeof(keys->remote_csrk.val));
^
Change-Id: I05393c1b2e12c9a66d8ad3e7906d3aa94a57b193
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
If BR/EDR is enabled Pairing Request can also be sent without support
for LE central role.
zephyr/net/bluetooth/smp.c:1326:12: warning: 'smp_br_send_pairing_req'
defined but not used [-Wunused-function]
static int smp_br_send_pairing_req(struct bt_conn *conn)
^
net/built-in.o: In function `hci_encrypt_change':
zephyr/net/bluetooth/hci_core.c:2006: undefined reference to
`bt_smp_send_pairing_req'
net/built-in.o: In function `bt_smp_br_connected':
zephyr/net/bluetooth/smp.c:738: undefined reference to
`bt_smp_send_pairing_req'
Change-Id: I1b68d2412b49f02f42aa146a327252ce107523ca
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enabled L2CAP CoC to send buffers that contains fragments.
Change-Id: I898b8375f634d3f0652ec1e7f5a206aa47dd232d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
l2cap_chan_create_seg attempts to reuse the original buffer but it did
not check if there is enough space in the user_data in order to send
the buffer with bt_conn_send.
Change-Id: Iad54f5868dfce299903f5e392b3ea3b908d1e533
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When BR/EDR pairing is completed and we are pairing initiator start
SMP over BR/EDR if supported.
Change-Id: I9ff095cb89524693ea0e50a94db41bc1b3ab161f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
For SMP over BR/EDR we need BR specific channel context. This doesn't
cost as much as LE context since BR/EDR context is much simpler.
Also this make sure that we have enough contexts for devices that
support concurent LE and BR/EDR connections.
Change-Id: Ied4e3421a29c2fd20643598972dba2ccac5ce82e
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
BR/EDR context should be look-up with BR CID.
Change-Id: Id9cdce89b86a9c13015dc71a3a395a02f3d29a9a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This allows to correctly handle race when remote is sending fixed
channel data before response to Informatino Request was received.
Change-Id: I62e0daa744e11503d31b27f25952ae4ae23d5934
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Only connect BR/EDR fixed channel if remote indicates support for it.
Core Specification Vol 3. Part A. 4.11:
"An L2CAP entity shall not transmit on any fixed channel (with the
exception of the L2CAP signaling channel) until it has received a Fixed
Channels Supported InfoType from the peer L2CAP entity indicating
support for the channel, or has received a valid signaling packet from
the remote device on the Fixed channel."
If data on fixed channel was received before Information Response then
we connect this channel immediately.
Change-Id: Ifef142c4eb3c14ecffb4abe4836912e2f2aba3c9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is in preparation for proper handling of fixed channels over
BR/EDR.
Change-Id: I506c365377d5d6bc74f3cf6d257be43c17f22437
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The bt_storage_clear() function doesn't modify the data behind the
addr parameter, so the pointer should be decared const.
Change-Id: Icce676f9df80bac26ba4877bb63752559a43339f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Build Information Response with fixed channels mask based on
registered channels.
Change-Id: I47bd3255bd000d3721c77a34c6ea84bbb888630d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This reverts commit 627feb92d4.
This patch breaks TCP/IPv4 support in echo_server.
Change-Id: Ia1e2cf8dfa94f845d3a8282c83bba40b36ee782c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
net_send() is meant to release the refcount for the SYN buffer once
a connection is established, but this assumes that the application
uses net_send() for all outgoing buffers. It is possible to setup a
connection (and therefore generate an outgoing SYN) by calling
net_context_tcp_init(), which has the side-effect of overwriting
connection_status . Using such an API would then break the
assumption around net_send() reclaiming the refcount of the SYN buf.
A test case which exposes the problem:
* As a client, setup a connection with an HTTP server.
* Send an HTTP request contained in a buf using net_send()
* The server responds, and then tears down the connection.
* The test client then re-establishes another connection using
net_context_tcp_init()--this overwrites connection_status, causing
a refcount leak.
With this change, we remove the dependency on net_send() being called.
Change-Id: I96516cbca3e231ed7fb509a7c03c0ceebf80e03a
Signed-off-by: Rohit Grover <rohit.grover@arm.com>
Packets sent out through net_tx_fiber go through psock_send() where
they wait for data_is_sent_and_acked() to process them.
data_is_sent_and_acked() looks at the underlying connection's
MSS (maximum segment size) before putting them on the wire through
uip_send(). The trouble is that that linkage between the outgoing
buffer and the connection hasn't been established at the point
data_is_sent_and_acked() is called--this normally happens through
a call to uip_set_conn().
So data_is_sent_and_acked() fetches an invalid connection handle
and makes its choice using an arbitrary MSS. In my particular case,
this arbitrary value was 0, and so packets weren't being sent out.
Change-Id: I42e8ae104ac20f8df8780c8aee6964ed37113ba0
Signed-off-by: Rohit Grover <rohit.grover@arm.com>
This clarify what this list holds making code more readable.
Change-Id: Ia212cf611cbf2c2deab139324120b993bf14d06f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Layers (modules) above HCI like L2CAP need to know status of applied
security procedure when it's triggered on existing connection. It gives
them possibility to make action in layer specific context on
post-security-procedure conditions.
Change-Id: Ia10078469847b29bb7eb3b1fb376ac305dd0b0fc
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Fix the following compiler warnings/errors that show up with llvm:
tests/bluetooth/shell/src/main.c:594:2: error:
initializing 'const uint8_t *' (aka 'const unsigned char *') with an
expression of type 'char [11]' converts between pointers to integer types
with different sign [-Werror,-Wpointer-sign]
BT_DATA(BT_DATA_NAME_COMPLETE, DEVICE_NAME, DEVICE_NAME_LEN),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
include/bluetooth/bluetooth.h:93:11: note: expanded
from macro 'BT_DATA'
.data = (_data), \
^~~~~~~
1 error generated.
net/bluetooth/hci_core.c:1759:22: error: passing
'uint8_t [248]' to parameter of type 'const char *' converts between
pointers to integer types with different sign [-Werror,-Wpointer-sign]
name_len = strlen(evt->name);
^~~~~~~~~
lib/libc/minimal/include/string.h:32:34: note: passing
argument to parameter 's' here
extern size_t strlen(const char *s);
^
CC net/bluetooth/log.o
net/bluetooth/hci_core.c:3136:10: error: passing
'uint8_t [248]' to parameter of type 'char *' converts between pointers to
integer types with different sign [-Werror,-Wpointer-sign]
strncpy(name_cp->local_name, CONFIG_BLUETOOTH_BREDR_NAME,
^~~~~~~~~~~~~~~~~~~
lib/libc/minimal/include/string.h:30:39: note: passing
argument to parameter 'd' here
extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n);
net/bluetooth/conn.c:301:10: error: passing
'uint8_t [16]' to parameter of type 'char *' converts between pointers to
integer types with different sign [-Werror,-Wpointer-sign]
strncpy(cp->pin_code, pin, sizeof(cp->pin_code));
^~~~~~~~~~~~
lib/libc/minimal/include/string.h:30:39: note: passing
argument to parameter 'd' here
extern char *strncpy(char *_Restrict d, const char *_Restrict s, size_t n);
Change-Id: I342131c6c2b25445382b2317d673561c4087096b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
API Implemented Connect API. This can be used to establish A2DP connection.
Change-Id: I8cf714283a452c40b33fd46de442514a1341264c
Signed-off-by: Itankar, Piyush T <piyush.t.itankar@intel.com>
The maximum allowed values in Kconfig were quite conservative.
Change-Id: Icd2d09a2d52fbbaf03671147f08e08385c6776c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
