Add generic SoC support for the supported nordic SoCs:
- nrf5340
- nrf9160
- nrf9120
Add generic SoC support by taking board specific configurations from
zephyr devicetree and kconfig.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Deprecates setting GPREGRET to the reset reason as this has been
replaced with the boot mode retention subsystem for nRF51/nRF52.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
The nRF9161 is technically a SiP (System-in-Package) that consists of
the nRF9120 SoC and additional components like PMIC, FEM, and XTAL,
so for nrfx/MDK the nRF9120 SoC is to be selected as the build target,
but since the nRF9161 is what a user can actually see on a board, using
only nRF9120 in the Zephyr build infrastructure might be confusing.
That's why in the top level of SoC definitions (for user-configurable
options in Kconfig, for example) the nRF9161 term is used and nRF9120
underneath.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Allow building for nRF non-secure and TF-M enabled without having the
platform partition enabled.
In this configuration the soc_secure functions have no valid
implementation, leave it as a compilation error if the application
includes the functions.
Add missing dependency on soc_secure functions being available for
SOC_HFXO_CAP_INTERNAL configuration.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The limitation on HWINFO_NRF depending on not nonsecure was removed in
52be3030aa.
This caused problems when TF-M was not enabled.
This happens on the thingy53_nrf5340_cpuapp_ns board since this board
is not supported by TF-M.
Introduce proper dependency handling for the soc secure functions
to make HWINFO_NRF unavailable when no secure services exist in
nonsecure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Instead of selecting appropriate HAS_HW_NRF_* options for particular
nRF SoCs (and simulated nRF52 target), set their values basing on
information from devicetree.
Correct also semantics of those options so that they are set only when
a corresponding DT node is enabled. This allows using them directly in
Kconfig dependencies of Zephyr drivers for nRF peripherals. Update
appropriately these dependencies.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
According to Kconfig guidelines, boolean prompts must not start with
"Enable...". The following command has been used to automate the changes
in this patch:
sed -i "s/bool \"[Ee]nables\? \(\w\)/bool \"\U\1/g" **/Kconfig*
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add Kconfig options that allow users to select the way the APPROTECT
mechanism is handled in the SystemInit() function.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Kconfig symbol NFCT_PINS_AS_GPIOS may be defined for all
Nordic nRF SoCs that have the NFCT hardware, so we move
the option definition in nRF common Kconfig file. Also,
we correct the help text to reflect that nRF52 series DKs
and nRF5340 DK have different pins for NFC.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Remove the
# Omit prompt to signify a "hidden" option
comments that appear on some symbols. They seem to have been copy-pasted
at random, as there are lots of promptless symbols that don't have them
(that's confusing in itself, because it might give the idea that the
ones with comments are special in some way).
I suspect those comments wouldn't have helped me much if I didn't know
Kconfig either. There's a lot more Kconfig documentation now too, e.g.
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Keep some comments that give more information than the symbol having no
prompt.
Also do some minor drive-by cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This commit enforces platform-specific initialization
for nRF SoC family. The specific platform initialization
hook is invoked directly after reset and calls the nRFx
SystemInit() function.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Simulated NRF boards based on the POSIX ARCH cannot directly
use the current SOC_*NRF options as these pull options from
the ARM CPU and other peripherals.
This commit adds a new set of hidden SOC_COMPATIBLE_* options to
be selected both by the real SOCs and the simulated ones.
In this manner we can have the common code depend on the
SOC_COMPATIBLE* options instead of the current ones where
neccessary.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
(f) arm kconfig
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
2018-09-13 00:56:48 -04:00
Renamed from arch/arm/soc/nordic_nrf/Kconfig (Browse further)
