Updates references to the net-tools project to refer to the correct
placement of net-tools under tools.
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
The sample illustates how to achieve bidirectional asynchronous audio.
Implicit feedback is the only way to achieve asynchronous USB headset
on devices that have only one isochronous IN and one isochronous OUT
endpoint.
The sample implements stereo playback and mono recording. While it would
be possible to have stereo recording, the commonly available headsets
are mono only. The number of channels can differ between audio sink and
source because the only requirement is that the two run on same clock.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
The generated HTML was broken, even though the rst files themselves
contained the correct URLs. Update to a different format which should
generate the right output.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Deprecate the net_buf_put() and net_buf_get() functions.
Special handling of net_bufs in k_fifos is no longer needed after commit
3d306c181f, since these actions are now
atomic regardless of any net_buf fragments.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
The auto-pts project is now days hosted under an independent organization
instead of the intel one.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
When socket errors call sm_handle_timeout_state() we might be
in a state where application assumes we are in registered state
but we are dropping it.
Therefore we must ensure that all registration states emit either
REGISTRATION_TIMEOUT event for application to indicate that
we have lost the connection to server.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Clean up before deprecating legacy device support.
The Linux kernel driver for this example has never been upstreamed or
implemented upstream. In general, 15.4 development does not seem to be a
big success, but if it comes up again, the protocol used by the example
will need to be redesigned anyway.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. This sample does not
contain anything special that is not present in the hid-mouse or
hid-keyboard samples. It also makes no sense to port it to a new stack.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Clean up before deprecating legacy device support. Remove
cdc_acm_composite sample, which is not much different than cdc_acm, but
uses two virtual UART interfaces.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Allow an application to add a Block2 option to an initial request for a
resource. For any subsequent requests as part of a blockwise transfer,
drop the application-added Block2 option since the coap_client must
append a Block2 option with updated NUM and SZX fields based on the
server response.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
adds filesystem as a resource for the http_server which serves static
(gzipped) files from a filesystem to the client.
Signed-off-by: Gerhard Jörges <joerges@metratec.com>
Introduce UDC_BUF_POOL_*_DEFINE macros based on NET_BUF_POOL_*_DEFINE
macros but use our own version of alloc and unref callbacks to get
buffers with specific alignment and granularity. Also, do not use ref
callback because it breaks alignment.
Also introduces helper macros for defining and checking UDC
driver-compliant static buffers.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Modify the bt_bap_scan_delegator_add_src to take an address and
a sid instead of a PA sync object, so that the scan delegator
can add a source without syncing to the PA.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Iface name which is used by native posix ethernet driver can only be
specified at compile-time. I wanted to run two instances of the same
program on native posix but did not want to make two separate builds only
to change the iface name. I have implemented getting the iface name from
command line.
Signed-off-by: Kacper Dalach <dalachowsky@gmail.com>
Fixes: #72363
The existing function to set the postfix is converting postfix
string to hexadecimal. Adding a new function to handle a use case
where the provided postfix should be used as is without any conversion.
Signed-off-by: Vineeta S Narkhede <VineetaSNarkhede@Eaton.com>
Added Isochronous channels to the controller
Moved Isochronous channels from LE Audio to the host
Changed the LE Audio to refer to the page where
the feature is more detailed described.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
With the new Bluetooth Qualification process the QDID and link to
launchstudio are outdated, remove them.
Also remove the ICS listing as it hasn't been updated for a while.
Instead add a download link to the Zephyr Bluetooth Host ICS file.
Update the documentation configuration script to include the ICS file
(`*.pts`) in the external contents.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Utilize a code spell-checking tool to scan for and correct spelling errors
in various files within the `doc` directory.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add information about these missing Kconfig options:
CONFIG_NET_CONFIG_MY_IPV6_ADDR
CONFIG_NET_CONFIG_PEER_IPV6_ADDR
CONFIG_NET_CONFIG_MY_IPV4_ADDR
CONFIG_NET_CONFIG_MY_IPV4_NETMASK
CONFIG_NET_CONFIG_MY_IPV4_GW
CONFIG_NET_CONFIG_PEER_IPV4_ADDR
Fixes#75211
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remake the Zephyr Generic audio framework (GAF) figure to a graphviz
version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Generic audio framework (GAF) figure to a graphviz version.
This makes it easier to modify it directly in the .rst file.
This also adds the missing GMAP/GMAS.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Remake the Bluetooth Audio Architecture figure to a graphviz
version. This makes it easier to modify it directly in the
.rst file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the sample application as existing for the CAP initiator
and CAP acceptor.
The samples are still in progress of being improved and
fully featured, but they exist and can be used already now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
For each of the fdtable.h functions listed below, convert the
z_ prefixed semi-private functions to use the zvfs_ prefix.
ZVFS stands for Zephyr Virtual File System and
is intended to be a common library used by the C library,
POSIX API, Networking, Filesystem, and other areas.
There are already a few functions in fdtable.h that use the
zvfs_ prefix, so this change is mostly about unifying them in
a way that uses a suitable prefix ("namespace") so that it can
be considered a public API.
- z_alloc_fd
- z_fdtable_call_ioctl
- z_finalize_fd
- z_finalize_typed_fd
- z_free_fd
- z_get_fd_obj
- z_get_fd_obj_and_vtable
- z_get_obj_lock_and_cond
- z_reserve_fd
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
The bt_mesh_cfg_srv structure was removed in ad2fd44d7a, no need to
keep this text here anymore.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
config file snippets should use "cfg" pygment to get proper highlighting
This commit updates all occurences where "kconfig" or other languages
were used.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add documentation about USB message notifications. Use literalinclude to
pull code snippets from the samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Add doxygen group with MSC device API and document macro to create
mapping between disk access and MSC LUN.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Make example code most left-aligned.
Also use :samp: to format identification strings in the table.
Followup on commit 8739efe0fc
("doc: usb: add initial USB device configuraiton howto").
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Fill-in the mode field of the fd_entry so that the
implementation can be made aware that the specific file
descriptors created are sockets.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Add initial documentation how to configure and enable new USB device
support. Use literalinclude to pull code snippets from the samples.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
We have some other simpler CDC ACM and HID samples in the tree.
Providing multiple functions is a core functionality of USB device
support, and we have other samples to demonstrate this as well. This
sample does not really provide anything unique, but has a few issues
such as unsafe HID buffer handling and calling uart_fifo_fill() outside
of the UART driver's IRQ context.
Remove the hid-cdc sample, as there is no value in this sample, and to
avoid spending time fixing and cleaning up the code.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
