Describe the samples using code-sample directive in preparation for
upcoming changes to the Zephyr documentation that will be leveraging
the provided description and metadata.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Drop support for Google Kukui EC board which was used for
early Zephyr experiments but doesn't really exist anymore.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Automatically handle device runtime PM for all flash API calls.
Asynchronously release the device after a small delay to minimise power
state transitions under multiple sequential API calls (e.g. NVS).
Signed-off-by: Jordan Yates <jordan@embeint.com>
The driver in tree is for u-blox M8 devices, not M10. The M10 series
devices (from Protocol Version 23.01) use a different, non backwards
compatible interface for configuring the modem behaviour.
Of the two boards tested in the original PR, the "VMU RT1170" is
explicitly listed as having a u-blox NEO-M8N modem, while I have
been unable to find any information online about the "FMURT6" board.
Leaving the naming as-is will cause problems when M10 drivers are
contributed.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Update changes about `arch_stack_walk()` in RISCV, ARM64 & X86.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
The sample illustates how to achieve bidirectional asynchronous audio.
Implicit feedback is the only way to achieve asynchronous USB headset
on devices that have only one isochronous IN and one isochronous OUT
endpoint.
The sample implements stereo playback and mono recording. While it would
be possible to have stereo recording, the commonly available headsets
are mono only. The number of channels can differ between audio sink and
source because the only requirement is that the two run on same clock.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Ensure initial search menu visibility is properly set so that key
events don't get trapped preventing arrow key navigation on the
document.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add two new commands that automatically locally host the generated
documentation upon completion and rebuild/rehost when the input files
change without any user interaction.
For more info see: https://pypi.org/project/sphinx-autobuild/
Signed-off-by: Jordan Yates <jordan@embeint.com>
Get the output directory from environment variables instead of
attempting to reparse the CLI arguments, as these can actually refer
to a program other than `sphinx-build` (for example `sphinx-autobuild`).
Signed-off-by: Jordan Yates <jordan@embeint.com>
The ENABLED_SECTION option is not a YES/NO option but should
contain a list of section label to be processed. For example,
adding INTERNAL_HIDDEN will make doxygen to look through all
the blocks with "@cond INTERNAL_HIDDEN" and "@endcond". So
just remove the "YES" and leave it an empty list.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The lp5569 features a double functioning pin for enable and pwm control.
The chip, however, uses the first rising edge to initialize and get ready
for i2c communication, and then the pin alters function to pwm mode.
Add support for providing enable-gpios to the lp5569 in the dts, which
will make sure to assert the pin and wait for the chip to initialize
before attempting further configuration of the chip.
Signed-off-by: Emil Juhl <emdj@bang-olufsen.dk>
The lp5569 controller contains an internal charge pump which can be useful
for driving LEDs with a forward voltage greater than the lp5569 supply.
Taking advantage of the charge pump can alleviate the need for an external
boost converter.
Add a dts property, charge-pump-mode, to the ti,lp5569 binding with which
the cp_mode bits of the MISC register will be configured.
Following the datasheet, the possible configurations are:
0x00 -> disabled (default)
0x01 -> 1x mode
0x10 -> 1.5x mode
0x11 -> auto mode
Signed-off-by: Emil Juhl <emdj@bang-olufsen.dk>
Expanding the ZTEST shell to include a command that
accepts additional parameters, such as ztest run_testcase
<suite:test> -p any_value.
Adding the new ZTEST_P macro, to create the
parameterized test.
Signed-off-by: Arkadiusz Cholewinski <arkadiuszx.cholewinski@intel.com>
Mark the POSIX_SIGNALS Option Group as supported to the extent
possible under Zephyr, as Zephyr does not yet support processes.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
NXP IMX USDHC fallback card detection method changed from querying the
peripheral to simply assuming the card was present. Add a note to the
migration guide highlighting this and explaining how to restore the
previous behavior for anyone using this detection method.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Refactor the guidelines rule table and add a zephyr rule number
to make it more clear that the coding guideline rules are a
subset of the MISRA-C:2012 rules.
Signed-off-by: Simon Hein <Shein@baumer.com>
Implemented the following:
- `asctime_r()`
- `asctime()`
- `localtime()`
- `localtime_r()`
- `ctime()`
- `ctime_r()`
Specifically:
- the implementation of `localtime()` & `localtime_r()` simply
wraps around the gmtime() & gmtime_r() functions, the
results are always expressed as UTC.
- `ctime()` is equivalent to `asctime(localtime(clock))`, it
inherits the limitation of `localtime()` as well, which only
supports UTC results currently.
Added tests for these newly implemented functions.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Commit 698a0c3193 changed the bluetooth_api
section title, which made the reference in the Coding guidelines turn into
"API", which is confusing.
Use a fixed title for that reference to fix the issue.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
All the network related shell activities should be under
network shell so moving it to "net bridge ..." command.
Add this information to migration guide.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Remove the references to the breathe extension in the
Schematic of the documentation build process graph and
the filtering expected warnings section.
Signed-off-by: Simon Hein <Shein@baumer.com>
The generated HTML was broken, even though the rst files themselves
contained the correct URLs. Update to a different format which should
generate the right output.
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
The received messages are put into the FIFO one by one in the
order, the hardware will return the queue index for current
message. So use the index instead of reading always from 0.
Signed-off-by: Ha Duong Quang <ha.duongquang@nxp.com>
A common question is how twister decides on which platform to run
a given test. Added section is meant to explain those rules.
Signed-off-by: Maciej Perkowski <Maciej.Perkowski@nordicsemi.no>
Add conn parameter to status/flags callbacks of bt_vcp_vol_rend_cb
to differentiate between remote and local changes.
Signed-off-by: Chang An <chang.an_1@nxp.com>
Add basic WPA2 EAP-TLS support.
Also, add test infrasturcture esp. the certification handling,
non-certificate credentials are take as runtime input and certificated
are build time input for testing.
A real application can set certificates at runtime too.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
The docs for the iterable sections has a minor typo when
describing how to add the structs to the linker, repeating
'place the' twice.
Signed-off-by: Paulo Santos <pauloroberto.santos@edge.ufal.br>
EARLY, APPLICATION and SMP levels are no longer support for device
drivers as 2 releases have happened since its deprecation. Add a
validation macro so that compilation fails if the given level is not
valid.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Compatible headers have already been kept for 2 releases, so the time to
remove them has come.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Extend pytest-args from configuration yaml file with args
from command line instead of overwriting.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
This extension was created to overcome C domain/Breathe limitations.
This is no longer needed as we link directly to Doxygen pages.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Added python-tk to the brew install statement.
In order to use the zephyr gui tools python must also have the
"tkinter" (python tk interface) tools available.
tkinter is NOT part of 'python3' through homebrew on macOS.
fixes#76811
Signed-off-by: Eric Southam <eric.southam@lvt.com>
kconfig options should be *merged* instead of *appended*, otherwise
search index can be huge, among other side effects.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Clean up documentation pages for the new perf tool
as they contained several typos, grammar errors, and
duplicated content between main doc page and sample
page
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Deprecate the net_buf_put() and net_buf_get() functions.
Special handling of net_bufs in k_fifos is no longer needed after commit
3d306c181f, since these actions are now
atomic regardless of any net_buf fragments.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
