Separate ipc_service libraries Kconfig entries from ipc_service backend
entries. IPC_SERVICE_BACKEND_ICMSG_BOND_NOTIFY_REPEAT_TO_MS is renamed
to drop BACKEND part, because this entry applies to a library, not to
one backend. Icmsg related entries are grouped now in a menuconfig for
cleaner presentation in configuration editors.
Signed-off-by: Hubert Miś <hubert.mis@nordicsemi.no>
The shell_mgmt_config.h and stat_mgmt_config.h as they have been only
providing alternative identifiers for Kconfig options.
Now the Kconfig options are directly used in code and the headers
have been removed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
188d2dfcca introduced a change where log message queue again
become configurable through Kconfig instead of being fixed in
the code. However, it updated only the configuration of an UART
backend. This commit updates other backends as well. Including
dummy backend which has fixed in the code value.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The Kconfig option allows to set minimum expected sector size
to be supported by FAT fs driver.
When this value differs from CONFIG_FS_FATFS_MAX_SS the driver
will query device for actual sector size, expecting different
sector sizes for different device. When CONFIG_FS_FATFS_MIN_SS
and CONFIG_FS_FATFS_MAX_SS are the same, then there is slight
reduction if FAT driver size, as the query logic is removed
and CONFIG_FS_FATFS_MAX_SS is used for all devices.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
File backend can be read-only with the use of `settings_file_src()` API. It
makes no sense to create file when `settings_load()` is called and
registered file backend won't be used for saving files (because
`settings_file_dst()` was not used).
Do not create file during `settings_load()` if it does not exist yet. This
just requires to remove FS_O_CREATE flag in `fs_open()` invocation.
Open file with read-only access, which is now possible after removal of
`FS_O_CREATE` flag.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This allows the caller to dump a region of memory rather than
dumping one byte (word, etc) at a time. Additionally, it
respects alignment requirements so it works for e.g. 32-bit
register accesses.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
`settings_fcb_save_priv()` already takes `const char *value`, so there is
no reason to cast to `char *` before passing.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
`settings_file_save_priv()` already takes `const char *value`, so there is
no reason to cast to `char *` before passing.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This function was refactored several times due to many features (like
base64 encoding), which got deprecated over time. Simplify it a bit now.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
This macro is not used anymore and is strictly a leftover, which should be
removed as part of commit 55be783c85 ("settings: Remove deprecated
SETTINGS_USE_BASE64 support").
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Put all options under one `if SETTINGS` block, so that `depends on
SETTINGS` does not need to be repeated every time.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Introduce an API mirroring the CMSIS-DSP's basicmath. If CMSIS_DSP is
enabled, then it will by default be used as a backend. Developers may
opt into a custom backend by setting CONFIG_DSP_BACKEND_CMSIS=n. If
done, the application must provide `zdsp_backend/dsp.h` and optionally
implement the functions in its own .c files.
Signed-off-by: Yuval Peress <peress@google.com>
This changes the minimal logging Kconfig to select printk rather
than imply it, this is because if someone turns printk off,
minimal footprint logging does not work, therefore it needs to be
a requirement.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Rather than exposing shell commands that take an opcode and
an optional parameter, the shell commands are now explicit
so that it is easier for a person to use the shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Generates XML file containing VIF policies by reading the device tree
using EDT.pickle generated during build
This script writes a subset of general and sink-pdo VIF policies in
output file
This script gets invoked during build if enabled through kconfig
The generated XML containing USB-C VIF policies could be used by
USB PD/Type-C analysers/testers to understand USB-C properties and
perform tests accordingly
Signed-off-by: Madhurima Paruchuri <mparuchuri@google.com>
Add experimental CDC ACM implementation for new USB device stack.
It currently implements only UART IRQ API support and is WIP.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The device supprt brings support for multiple stack instances,
multiple configuration, asynchronous transfer model, ability to
change most of the properties of a device at runtime and
the composition of configuration and classes at runtime.
The stack requires new UDC driver API and is not compatible
with old driver API (usb_dc_). The classes (functions) of old
(current) USB device stack cannot be used with new ones and must
be ported.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The `audio connect` shell command did not really do
anything anymore, and has thus been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some of the unicast audio shell commands were guarded by
CONFIG_BT_AUDIO_UNICAST_CLIENT and only usable by the client.
This moves some of the commands to a CONFIG_BT_AUDIO_UNICAST
guard instead, so that they are usable for builds with just
the server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This fixes VCP Volume Renderer linker error that was seen if built
with VOCS and/or AICS support disabled.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This seems to have caused build failures in spite
of CI passing in PR 52653.
This reverts commit 0a02a4a2af.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Introduce the Kconfig symbol `NET_PKT_BUF_USER_DATA_SIZE`. It is used to
set the user data size in the buffers used in the rx and tx network buffer
pools.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
This Kconfig setting was deprecated since
commit 8e99db5801 ("Kconfig: net: deprecate `NET_BUF_USER_DATA_LEN`")
and zephyr release 3.0.0.
This commit removes this deprecated and unused setting.
Signed-off-by: Christian Taedcke <christian.taedcke@lemonbeat.com>
An LE controller shall no longer support HCI_Read_Local_Supported_Codecs
[v1] according to BT Core 5.3.
Command bit and support code removed.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Adding a bit-mask to the 'extra' data structure allowing passing info
re. active CIS's to the ull_conn_iso_done handling. Per CIS storing
an expiration time counter, monitoring in done handling. Adding
establishment timeout monitor in CIS Create procedure, completing
and ntf'ing accordingly.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If a CIS is in teardown state, the data in structure should not be
trusted, so skip passing data to ISOAL
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
Instead of storing the calculated reload value (in conn intervals) in
the conn object, now store the timeout value, and perform calculation
when used. This allows using the timeout value across all CIS's without
having to re-calc and store on change of TO
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
This allows putting the UART backend on a serial device that has to be
quiet unless logging is explicitly enabled at runtime.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
Added a new Kconfig option for the Bluetooth Host to allow
unauthenticated pairing attempts made by the peer where an
unauthenticated bond already exists on other local identity.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Update the Bluetooth specific Kconfig legacy log template to use the new
log inheriting template.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add a new Kconfig template that allow log modules to inherit their log
level from their parent module.
For example, the logs used in the Bluetooth audio like
`BT_AUDIO_STREAM_LOG_LEVEL` can inherit their level from
`BT_AUDIO_LOG_LEVEL`.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Missing decode of conn_event_count on CIS_IND
Peripheral Suggest update to conn_event_count in case of a delayed
CIS_IND, allowing CIS peripheral more time to setup
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The Bluetooth spec states that a K-frame exceeding the device's MPS
should trigger a disconnection of the channel.
Fixes two PTS tests that verify this behavior:
L2CAP/LE/CFC/BV-27-C
L2CAP/ECFC/BV-34-C
The current behavior is a silent truncation, which is not very nice for
the user, even if the spec would allow it.
Fixes#52228 and #51174.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Add mayfly locking around the access to the local pending procedure list
as it is accessed by both thread and mayfly.
Fixes#45427
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
When generating notification for Sleep clock accuracy, check for
success on rx_node allocation was left out. This is added.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
When MCC disconnected, it would memset the entire instance.
This causes issues, because the subscription parameters
would also be memset, causing the `notify` callback to
be set to NULL. If this was done as part of a disconnect,
the GATT layer would attempt to call the notify callback
as part of cleaning up the ACL, but if the callback was
set to NULL (from the memset) this caused a fatal error.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If LOG_PRINTK is used then the buffer size needs to be larger to
account for the additional header/footer output from the shell.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
This change will enable the logging system to handle printk() calls by
default if printk support is enabled, which improves output resiliency
when logging, mcumgr and printk calls are used. Will disable keep
LOG_PRINTK disabled for tests which are not using the new API as
moving to LOG_PRINTK causes test data to be output to a different UART
in the old test system.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
When reporting a receive state to the upper layers, the broadcast
assistant should report NULL if there is not a receive state
active. The "activeness" of a receive state is determined by
the length of the characteristic - If it is 0 then there
is no receive state active.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some missing features for getting coverage data for unit tests:
- Setting the unit_testing board to have coverage support and native
application.
- Fixing the CONFIG_COVERAGE check
Signed-off-by: Yuval Peress <peress@google.com>
