Few tests with wrongly names platforms. This section is now being
verified for correctness like all others.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- Update `MAX_IRQ_PER_AGGREGATOR` to 1024 to match with the
devicetree
- Update `2ND_LEVEL_INTERRUPT_BITS` to 11 bits to
be able to encode the L2 IRQs.
- Update `NUM_IRQS` to 1036 (L1 has 12, L2 has 1024)
Update the `MAX_IRQ_PER_AGGREGATOR` config in testcase
accordingly, so that it won't overflow the configured bits.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This commit excludes the `m2gl025_miv` platform from running the
`kernel.common.stack_sentinel` test. It experiences the same issue as
`hifive1`, which was described in issue #66070.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This provides memory mappings with the ability to be initialized in their
paged-out state and be paged in on demand. This is especially nice for
anonymous memory mappings as they no longer have to allocate all memory
at mem_map time. This also allows for file mappings to be implemented by
simply providing backing store location tokens.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
An ifdef should have been also checking for native_sim,
let's correct it.
Note: By now native_sim builds with "native_posix compatibility mode"
enabled, which sets BOARD_NATIVE_POSIX to avoid breaking all this kind
of dependencies. But that will stop soon.
So let's fix the dependencies.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add a zephyr/printk.h header for the __printk_hook functions, these are
currently manually declared by all console drivers for no good reason.
Move the documentation into the header and also unify the way that
console drivers call the function.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Like in C test. If MAX STDDEV is lower than single clock cycle then
set it to a single clock cycle.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If frequency of the system clock is lower then deviation may exceed
default value (10us). Instead of adjusting the default value, test is
rounding up expected standard deviation to a single clock cycle.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
`checkpatch.pl` requires that dts sources are indented with tabs,
fix all the spaces that slipped in while checkpatch wasn't watching.
Signed-off-by: Jordan Yates <jordan@embeint.com>
When content validation fails it is rather difficult to figure out the
cause if some meaningless byte mismatches another meaningless byte.
Let's store each memory location with its own virtual address so if a
mismatch occurs when reading it back it is obvious where it comes from.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Make sure constructors are run even when not using C++.
Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Adds a test to show that enabling IPI cascades
(CONFIG_SCHED_IPI_CASCADE=y) can correct an invalid set
of high priority threads on an N CPU system.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
Add the ability to touch memory in the opposite direction from one loop
to the next so to exercize the LRU eviction algorithm.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This patch file updates the use of assertion macros
comparing strings.
Command line used:
```
./scripts/coccicheck --mode=patch \
--cocci=scripts/coccinelle/ztest_strcmp.cocci tests/
```
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Fix incomplete test log capture when the external tool is used
and Twister Pytest Harness script ends without reading output
from the last test case running on the device.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Additional logging of kernel.timer.timer_behavior_external test case
statistics for timer drift, variance, etc. as JSON-formatted records
to make easier data collection and its further analysis.
These log records will be processed by the Twister Harness recording
feature which captures and parses timer statistics from the log output,
then composes it into twister.json and recording.csv files.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
Additional logging of kernel.timer.timer test case statistics for
timer drift, variance, etc. as JSON-formatted records to make easier
data collection and its further analysis.
These log records will be processed by the Twister Harness recording
feature which captures and parses timer statistics from the log output,
then composes it into twister.json and recording.csv files.
Signed-off-by: Dmitrii Golovanov <dmitrii.golovanov@intel.com>
32-bit multiplication overflows for the 130000 ppm value used currently
on Nordic SoCs and the duration that is configured to 100000 us.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
On Nordic SoCs, the clock that drives the system timer and the one that
is used in busy-waiting may be significantly skewed, so the test cases
that compare durations derived from those two clocks need to take into
account a proper threshold. After the `z_timeout_expires` function was
corrected in 3d29c9fe54, it turned out
that the threshold was missing in one check and the related test case
started to fail on nRF platforms. This patch adds that threshold there.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Created the `arch_stack_walk()` function out from the original
`z_riscv_unwind_stack()`, it's been updated to support
unwinding any thread.
Updated the stack_unwind test case accordingly.
Increased the delay in `test_fatal_on_smp`, to wait
for the the fatal thread to be terminated, as stacktrace can
take a bit more time.
Doubled the kernel/smp testcase timeout from 60 (default) to
120s, as some of the tests can take a little bit more than 60s
to finish.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Make sure k_mem_unmap() completes successfully on memory that is half
paged-out and such memory is no longer accessible afterwards.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This is part of a series of moving memory management related
stuff out of the Z_ namespace and into its own namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The board defconfig forces CONFIG_USERSPACE to be disabled
due to small number of available MPU regions which are not
enough for userspace testing.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Also any demand paging and page frame related bits are
renamed.
This is part of a series to move memory management related
stuff out of the Z_ namespace into its own namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is part of a series to move memory management related
stuff from Z_ namespace into its own namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is part of a series to move memory management functions
away from the z_ namespace and into its own namespace. Also
make documentation available via doxygen.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This renames z_phys_map() and z_phys_unmap() to
k_mem_map_phys_bare() and k_mem_unmap_phys_bare()
respectively. This is part of the series to move memory
management functions away from the z_ namespace.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Rename all Silicon Labs radio boards to always use the official kit name of
the kit containing only the radio board as board target name. Disentangle
boards using Series 1 and Series 2 SoCs that have almost nothing in common
in terms of devicetree content, but still occupied the same directory.
As part of the initial HWMv2 port, all radio boards were merged into a
single target efr32_radio, using the SoC as a board qualifier to target
specific boards. This was unfortunate, as the SoC name is not sufficient
to identify a specific board -- the same SoC may be used on multiple
different boards. This commit reinstates every radio board as an individual
board target.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Since commit 0c23cf94a4 ("include/kernel: check type of object passed
to K_POLL_EVENT_INITIALIZER") it is no longer possible to use arbitrary
type literals with the initializer macro. Misconstructing a k_poll_event
type for test purpose must be done explicitly.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Adding bt_tester support.
Adding bt_tester app build
with Twister for frdm_rw612 board
Fix failing tests/samples due to unsufficent MPU ressources
by releasing unnecessary MPU regions.
Twister builds added on peripheral/central ht and
enabled Power manager on those examples to cover
the CI builds with PM enabled.
Signed-off-by: Yassine El Aissaoui <yassine.elaissaoui@nxp.com>
