Add overlay file for nrf54h20.
Align code and DTS between spi_error_cases and spi_controller_peripheral.
Signed-off-by: Sebastian Głąb <sebastian.glab@nordicsemi.no>
Rename the current sensor_read to sensor_read_async_pool and create a
new blocking sensor_read helper.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
The driver isn't currently buildable due to "west blobs" support never
having been added for hal_telink. Furthermore, even if the blob
dependency is manually made available it turns out the code has
bitrotten to the point where it doesn't build anymore. This situation
has continued for several years without anyone taking action, so I think
it's safe to assume this is unmaintained and should be removed.
Signed-off-by: Johan Hedberg <johan.hedberg@gmail.com>
Fixes: #73065
Update APPLICATION_CONFIG_DIR is Zephyr CMake and sysbuild to follow
the common principle in Zephyr for relative paths.
This means that relative paths are taken from the application source
directory when specified on command line, and require local scoped
defined APPLICATION_CONFIG_DIR to be given as absolute, for example by
using CMAKE_CURRENT_LIST_DIR.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
- Adds boot_request_upgrade() return value check.
- Avoid repeating resets if the upgrade request fails.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The elcdif interrupt is enabled in the write function and disabled in
the IRQ handler for each new frame update. Disabling the interrupt when
no new frame needs to be sent gives the CPU the possibility to enter
low-power mode. However, when the application's frame rate
matches the LCD refresh rate, this adds additional latency.
This commit provides a config to choose between following options:
- Toggle the CUR_FRAME_DONE_IRQ_EN in the write function and in IRQ
handler for each new frame when the power mangement is a concern.
- Activate the CUR_FRAME_DONE_IRQ_EN once at the init function when
low latency is required.
Signed-off-by: Trung Hieu Le <trunghieu.le@nxp.com>
To build LLEXT images using the xt-clang toolchain from Cadence
linker flags have to be set similar to other toolchains. Add the
missing cmake files.
Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com>
The 'tfm' tag was removed from the samples in in
7c80473e0a but it remained in use in other
parts of the project.
This change brings back consistency through out the project.
Signed-off-by: Wilfried Chauveau <wilfried.chauveau@arm.com>
- Set MCUBoot "upgrade only" method,
as the program size is 128B (>32B).
- Set slot sizes to the same value,
required by the MCUBoot "upgrade only" method.
Signed-off-by: Andrej Butok <andrey.butok@nxp.com>
The GSM_PPP device driver and its direct dependencies, UART_MUX
and GSM_MUX have been removed. The net/gsm_modem sample has been
removed and the net/cloud/tagoio and net/mgmt/updatehub samples
have been updated to align with this change.
This commit documents all above.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Remove the deprecated uart_mux and gsm_mux modules and all of
their configurations/dependencies across zephyr.
Optimally uart_mux and gsm_mux would be removed in their own
respective PRs, but the two modules are directly coupled, so
to preserve bisectability, they must be removed together.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The new modem_cellular driver had support for the deprecated
generic zephyr,gsm-ppp dts compatible for backwards compatibility.
zephyr,gsm-ppp is being removed, and as such, modem_cellular.c
no longer needs to support it.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The gsm_ppp driver is deprecated, and will be removed, along with
its dependencies UART_MUX and GSM_MUX.
This commit removes the integration with GSM_MUX from ppp.c, making
it solely dependent on the chosen node zephyr,ppp-uart.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
gsm_mux and uart_mux are deprecated and will be removed.
Remove integration with gsm_mux and uart_mux from modem_shell.c
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
gsm_mux and uart_mux are deprecated and will be removed.
Remove integration with gsm_mux and uart_mux from modem_shell.c
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The gsm modem driver is deprecated and will be removed. Remove
the build overlay and dependency on the gsm modem from the
tagoio sample.
The new cellular modem driver and subsystem use the native
networking stack and the pm subsystem, so just like ethernet,
enabling the cellular modem is up to the board configuration.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The gsm modem driver is deprecated and will be removed. Remove
the build overlay and dependency on the gsm modem from the
updatehub sample.
The new cellular modem driver and subsystem use the native
networking stack and the pm subsystem, so just like ethernet,
enabling the cellular modem is up to the board configuration.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The deprecated gsm_ppp modem driver will be removed. Remove
gsm_ppp modem driver from build_all test suite.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The gsm_modem driver is deprecated, and will be removed. Remove
the gsm modem sample which depends on the deprecated driver.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
a change in the dma driver exposed that the dma_slot was incorrectly
set in the uart driver. this change is needed for async uart on lpc55
to work.
Signed-off-by: Johan Carlsson <johan.carlsson@teenage.engineering>
In order to be compatible with Linux AF_PACKET socket calls, the
protocol field needs to be in network byte order.
So for example, if user wants to receive all packets, then the
protocol field needs to be set as "htons(ETH_P_ALL)".
See Linux manual page at
https://www.man7.org/linux/man-pages/man7/packet.7.html
for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When running clang-tidy, an 'ineffective bitwise and operation' (type
misc-redundant-expression) was detected on Z_CBPRINTF_IS_PCHAR macro.
As this behavior is expected, we are adding comment to ignore this macro
for the specific misc-redundant-expression check of clang-tidy
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
When running clang-tidy and logging module is used through any of the
LOG_ macro, an issue was raised in Z_CBPRINTF_PACK_ARG2 macro.
A uint32_t variable was copied into a _rws_buffer array with an implicit
cast (error: implicit conversion loses integer precision: 'uint32_t'
(aka 'unsigned int') to 'uint8_t' (aka 'unsigned char')).
Here we are adding an explicit cast to get rid of the implicit
conversion error.
Signed-off-by: Nathan Olff <nathan@kickmaker.net>
This patch removes all uses of the adv auto-resume feature in the
Bluetooth samples. The auto-resume feature is planned for deprecation.
Samples that are not intended to demonstrate a technique to do with
re-connection simply do not restart the advertiser, in interest of
simplicity. The user is expected to reboot the sample when needed.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
When tests control the LwM2M client entirely through
shell, we should be able to set the RD client context
from the application without causing RD client to
start registration.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Behavior of "force"-mode as described in datasheet cannot be achieved if
low-power mode is enabled. After triggering a sampling, the sensor will
not sample again for the period specified in measurement-time.
Signed-off-by: Juliane Schulze <juliane.schulze@deveritec.com>
This commit fixes#73337.
Before #72243 Mbed TLS was not using
USE_PSA and all PSA features were not enabled. After #72243
if BUILD_WITH_TFM is set:
- USE_PSA in Mbed TLS is enabled by default and
- all PSA features are enabled.
This commits reverts both changes for net.socket.register.tls
test case.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
Cosmetic change to align code style when initializing DSP registers. The
code in intel_is_ace() branch was moved as-is from acetool.py when the
two tools were merged to make reviewing easier. Fix the code style to be
coherent in the merged cavstool.py. No functional change.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Use the correct register to read ROM status on intel_adsp_ace20.
Without this this fix, firmware load is successful but
boot takes extra 2 seconds and following warning was emitted:
WARNING:cavs-fw:Load failed? ROM_STATUS = 0x0
The log-only mode (-l) was not working at all and is fixed
by this commit.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The nrfutil runner calls "nrfutil --json device list" which outputs
information about all connected serial ports. The list includes not only
actual boards but also any ttyACM instance. If the ttyACM instance does
not have serial number, then the nrfutil runner will fail on matching
serial number regexp on NoneType.
Fix the issue by limiting nrfutil runner board output to only devices
that have trait jlink set.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Add a new driver for the AUXPLL peripheral found in some new Nordic
SoCs, e.g. nRF54H20. AUXPLL is used to clock some peripherals like e.g.
CAN. Note that driver is implemented natively as Nordic HAL lacks
definitions for the AUXPLL IP, this may be changed once these become
available.
Note that usage of nrf_auxpll_config_set generates unnecessary extra
assembly code compared to the proposed API in
https://github.com/zephyrproject-rtos/hal_nordic/pull/185 which
guarantees static initialization and single write access, possible in
the Zephyr context. However, current solution has been enforced until
further discussion on raw access APIs takes place.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Define CANPLL, an AUXPLL IP instance used by the CAN IP. PLL settings
are hardcoded in SoC files, as this PLL should not be configured by the
application. It is meant to always run at 80 MHz.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Define HFXO (High Frequency Crystal Oscillator). This clock is managed
by system controller, from an application point of view it is a fixed
clock.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
For default case it should print the option character provided by user.
Extra shell_help removed as it's being called in the caller function.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Added support to set BSS parameter.
Added support set BSS parameter maximum inactivity time.
Added support set BSS parameter inactivity poll feature.
Added support set BSS parameter maximum number of STA entries.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support to set BSS parameter "max_num_sta" at compile and run time
Added support to configure `max_num_sta` BSS parameter.
Maximum number of stations allowed in station table. New stations will be
rejected after the station table is full.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support for configuration of AP parameter "Skip inactivity poll".
Only build time setting is supported.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Support to set BSS parameter at compile and run time.
Added support to configure `max_inactivity` BSS parameter.
Station inactivity timeout is the period for which AP may keep a client
in associated state while there is no traffic from that particular client.
If a non-zero value is set, AP may choose to disassociate the
client after the timeout.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
