This commit renames the CAN sample directory name from `CAN` to `can`
to be consistent with others.
Noting that the CAN driver test directory is named `tests/drivers/can`,
we have no excuse for naming the CAN driver sample directory
`samples/drivers/CAN`.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Convert to use DT_IRQN() and DT_IRQ() to get the irq number and priority
for the DT_NODELABEL(gpiote) device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Substitute integral constants where call sites passed named constants
that have timeout values as arguments to parameters that expect
millisecond durations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Convert bluetooth samples or board samples using bluetooth to use the
new k_timeout_t struct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This is more a sample than a test, so put it under samples with the goal
of having dedicated tracing tests in the future under tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Standard "Requirements" section copied from other networking samples,
making clear the network connection requirements and linking to
instructions for QEMU networking.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To make sure this sample is built in CI.
Also includes fixing prototype of main() to make it build without
warnings (which would be errors in CI).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Convert CAN to use a chosen node property that is similar to how we
handle zephyr,entroy or zephyr,flash-controller as the means to select a
specific peripheral instance utilized by a subsystem.
Replace references of the form:
alias {
can-primary = &can1;
};
with:
chosen {
zephyr,can-primary = &can1;
};
Replace various macro/define references with either
DT_CHOSEN(zephyr_can_primary) or replace DT_ALIAS_CAN_PRIMARY_LABEL
with DT_CHOSEN_ZEPHYR_CAN_PRIMARY_LABEL.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The SoC node has compatibles for the specific SoC in place, having the
same compatible at the top level is technically a conflict and the
top-level one should really just be about the board. Remove the SoC
related compatibles at the top-level.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove logging of individual threads spread out throughout the
bluetooth subsystem. The stacks can be analysed by enabling the
following options.
CONFIG_THREAD_ANALYZER=y
CONFIG_THREAD_ANALYZER_AUTO=y
CONFIG_THREAD_ANALYZER_RUN_UNLOCKED=y
Optional:
CONFIG_THREAD_NAME=y
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add debug configuration to easily enable logging through RTT. Required
to use RTT since the UART is otherwise used for the h4 UART driver.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Roughly based on eventfd example code from Linux manpages. Similarly
to other POSIX-compatible sample, Makefile.posix is provided to build
the code on a POSIX system (in this case, as eventfd() is
Linux-specific, this has to be a Linux system).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit renames all local definitions with the name `PORT` in the
net samples, in order to prevent name conflict with certain HALs
(notably, Atmel SAM E5x HAL).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace DT_FLASH_DEV_NAME with DT_CHOSEN_ZEPHYR_FLASH_CONTROLLER_LABEL.
We now set zephyr,flash-controller in the chosen node of the device
tree to the flash controller device.
NOTE: For a SoCs with on die flash, this points to the controller and
not the 'soc-nv-flash' node. Typically the controller is the
parent of the 'soc-nv-flash' node).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit renames the Kconfig `FLOAT` symbol to `FPU`, since this
symbol only indicates that the hardware Floating Point Unit (FPU) is
used and does not imply and/or indicate the general availability of
toolchain-level floating point support (i.e. this symbol is not
selected when building for an FPU-less platform that supports floating
point operations through the toolchain-provided software floating point
library).
Moreover, given that the symbol that indicates the availability of FPU
is named `CPU_HAS_FPU`, it only makes sense to use "FPU" in the name of
the symbol that enables the FPU.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Reworked spi_sam driver to utilize new DT_INST macros as part of
this rework we also now get pin ctrl/mux configuration information
from the device tree instead of via Kconfig and defines in soc_pinmap.h
We remove defines from dts_fixup.h and soc_pinmap.h and associated
Kconfig symbols that are no longer needed due to getting all that
information from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Tests were failing as they were looking for an alias which didn't exist
Also, because some code in kscan_handlers.c wasn't compilable
Signed-off-by: Mark Olsson <mark@markolsson.se>
The sensor is on the nrf9160_innblue22 not nrf9160_innblue21. This
causes CI build failures since there is no dts node for the sensor
on the nrf9160_innblue21 board.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use DT_INST_ defines. As part of this conversion we
remove the Kconfig options for per GPIO controller enables and instead
get that information from device tree. This means we now disable each
GPIO controller by default in the DTS and have each board dts enable the
GPIO controller ports it needs.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
board support nrf9160_innblue22 includes the sensor in
nrf9160_innblue22_common.dts, explicit overlay can be removed
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
Convert driver to use new DT_INST macros throughout. We update one
sample app to use a nodelabel reference. We also remove defines in
dts_fixup.h as they are no longer needed.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
According Mesh Profile 1.0.1. A application key shall
binding single network key. And Device key shall bind all
network key, and dev key only known by cfg_cli and node self,
only used by cfg_cli & cfg_srv.
Fixes: #21088
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Extend sample code to demonstrate the eSPI API to read/write flash.
Remove trailing \n
Use LOG_ERR when applicable instead of LOG_WRN
Treat warnings as errors.
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Provide a description of the sample and how it works with different
power supply source configurations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
When the system is powered directly a measurement of Vdd provides the
battery voltage. This requires a different ADC configuration and
level curve.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
To obtain lower power measurements in general, we should turn off the
external flash which is on by default at boot.
Code is modeled based on examples shipped in the TI SimpleLink SDK.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Adding an example that exercises the sleep modes, then powers off the
system by going into deep sleep.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Replace use of Kconfig UART_X symbols by calls to DT API.
Clean driver from symbols definitions
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This selects CONFIG_BT_HCI_RAW_H4 which indicates to hci_raw to handle
H:4 header automatically.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes hci_raw to manage RX and TX buffers so its logic don't have
to be replicated on each an every driver/application, it also makes it
simpler to deal with extra headers for H:4 mode since that then can be
done at earlier at buffer allocation.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
