Changes the media control client API to pass structs by reference
instead of by value.
Also change internals of test to pass struct by reference.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the definition of the set extended advertising data command to be
a variable array instead of hardcoded to the maximum length. This
conforms to the definition from the Bluetooth specification and allows
the corresponding code to be slightly cleaner.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
In some cases (for examples when offloaded socket implementation does
not implement TLS functionality) it could be desired to create a native
TLS socket with an underlying offloaded socket.
This cannot be achieved with SO_BINDTODEVICE option only, as TLS socket
type is not really associated with a particular interface - it either
has to be offloaded, or a fully native socket is created (native TLS on
a native interface).
In order to address the problem, introduce TLS_NATIVE socket option.
This option instructs the socket dispatcher layer to create a native TLS
socket. As with the socket dispatcher the underlying socket
implementation is not decided during TLS socket creation, therefore it's
possible to use SO_BINDTODEVICE to choose either native or offloaded
interface for the underlying socket.
Additionally remove NET_SOCKETS_OFFLOAD_TLS Kconfig option, as it's no
longer needed with an runtime option to select whether to offload TLS or
not.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add an intermediate socket implementation called socket dispatcher. This
layer can be used along with the socket offloading, to postpone the
actual socket creation until a first operation on a socket is executed.
This approach leaves an opening to bind a socket to a particular
offloaded network interface, and thus offloaded socket implementation,
using SO_BINDTODEVICE socket option. Thanks to this, it is now possible
to use multiple offloaded sockets implementations along with native
sockets, and easily select which socket should use with network
interface (even if it's an offloaded interface).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Adds a Kconfig option for setting the Config Client and Health Client
timeout. Updates updates the default for Config Client to allow
reception of full sized message from a similar peer device at zero hops.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
Commit f7c4fe6778 ("shell: optimize history storage a bit") forgot
to distinguish between the newly allocated history item and the previous
one, causing havoc on ring buffer wraparounds with excess padding.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
if CONFIG_LOG_TAG_MAX_LEN is 0, then a warning would be generated
on the MIN macro always being false, but as
CONFIG_LOG_TAG_MAX_LEN is a constant, then it is better to just
compile out the function if it's 0.
Signed-off-by: Ryan McClelland <ryanmcclelland@fb.com>
The commit adds change to image management list where "<???>"
will be returned as version string in case when version to string
conversion fails.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
The ull_to_s, which is used to covert ints to string, has been
replaced with snprintf.
Above also fixes a bug where ull_to_s has been given INT_MAX as allowed
output string, while it should be given maiximum allowed buffer size.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Commit removes mgmt_streamer_reset_buf from mcumgr lib,
and supporting Zephyr function zephyr_smp_reset_buf.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Add API to add devices to a power domain in runtime. The number of
devices that can be added is defined in build time.
The script gen_handles.py will check the number defined in
`CONFIG_PM_DEVICE_POWER_DOMAIN_DYNAMIC` to resize the handles vector,
adding empty slots in the supported sector to be used later.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
This adds initial support for presets that includes API functions
to register/unregister presets and Read Preset Request control point
handler.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Adds a lock around the output to prevent corruption, and sets the buffer
size of the output to size of the output buffer. This fixes the
corrupted log output as process() may be called from multiple contexts
from different CPUs. A background log processing thread may race against
the panic ISR log context also calling process() on an SMP system.
Additionally sets the buffer size to 80 such that the cavs trace_out.c
functionality and lock are useful for more than one character at a time
greatly reducing the chances of garbled output in a printk and log race
but does not entirely prevent it. CONFIG_LOG_PRINTK=y should be used
to avoid all races.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
This allows an application to inspect a mcumgr os reset command and
either allow it or deny it with a result code.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Update client tx timestamp right after message is added to list
of outgoing messages. Delay between when message is generated and
sent is negligible. This will prevents bugs that appear when using
queue mode, where internal engine logic depends on timestamp being
updated when message is generated.
Signed-off-by: Marin Jurjević <marin.jurjevic@hotmail.com>
Cleanup in kconfig options in preparation for adding a
frontend that will use dictionary mode.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
HCI_LE_CTE_Request_Failed may be generated in case received LL_CTE_RSP
PDU didn't contain CTE or if peer rejected the request. HCI function
encode_data_ctrl responsible for dispatching received control PDUs
should not expect a PDU with PDU_DATA_LLCTRL_TYPE_CTE_REQ opcode.
It should never happen. The correct opcode here is PDU_DATA_LLCTRL_TYPE-
_CTE_RSP.
Result of this issue is an assert when LL_CTE_RSP PDU is received
but it does not include CTE.
The commit fixes the problem.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In the case that the peer responds with fewer dcid values than the
number of scid values in the connection request, we would assert or read
past the end of the buffer.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
It is possible that LE CoC channel is in disconnecting state (eg due
to peer sending too many packets) but application is not yet aware
of this (ie disconnected callback was not called) and thus may call
bt_l2cap_chan_recv_complete() to return credits. In this case it
leads to assert in l2cap_chan_send_credits.
It looks like PTS 8.2.1 is able to trigger this scenario when
executing L2CAP/ECFC/BI-02-C test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The zcbor_bulk_priv.h uses STRINGIFY for some of definitions
and, due to lack of inclusion of the toolchain.h, that was causing
compilation errors when NEWLIB would be selected.
Fixes#44811.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
define test run id and make it available to ztest. This will be used to
verify we are evaluating the same test we have just built and flashed
and that we are not looking at some old output.
Existing code in ztest will use this, and twister will define the run
id.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PR44014 introduced new pause logic for procedures but PR44297
was merged without being update to use it.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This adds a hash/checksum mcumgr handler to the file management commands
which can be used to get a hask or checksum of a file, and includes
handler implementations for IEEE CRC32 and SHA256.
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
This adds a command handler to the file management mcumgr system to get
the status of a file without needing to return file data (currently
reporting the file size).
Signed-off-by: Jamie McCrae <jamie.mccrae@lairdconnect.com>
Now refactored Connection Parameter Request procedure supports
parameter checking, and implements reject_ext_ind on invalid parameters
Updates to TODO description for remaining work
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
First available subcommand is for doing a send operation. Send operation
is supported by the LwM2M version 1.1.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
The event counter value for connection and periodic advertising
events is updated to next value during event preparation (in one
of prepare_cb functions in LLL).
IQ report is prepared after event preparation, so value of event
counter is ahead of the current event value by one, hence it has
to be subtracted.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
HCI_LE_Connectionless_IQ_Report and HCI_LE_Connection_IQ_Report
events has fields that store event counter values: Periodic_Event_-
Counter and Event_Counter, respectively.
Values assigned to this HCI events are taken directly from
lower link layer objects. In case of too slow processing of
HCI events values provided by LLL contexts could be changed before
HCI sends events to Host. That can happen e.g. in case of short
periodic advertising interval and slow UART baudrate.
In such situation event counter values will be corrupted.
To prevent that situation, event counter values connected with
IQ sample reports, has to be stored in node_rx_iq_report when
a report instance is filled in LLL.
This commit introduces required changes.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
