Fixs USDHC by setting PWR and CD gpio's correctly.
Adds missing button from the GPS module.
Co-authored-by: Peter van der Perk <peter.vanderperk@nxp.com>
Signed-off-by: Benjamin Perseghetti <bperseghetti@rudislabs.com>
Check for the existence of
pthread_rwlockattr_getpshared()
and
pthread_rwlockattr_setpshared().
Signed-off-by: Gaetan Perrot <gaetanperrotpro@gmail.com>
According to the `RFC8415` the length of the DUID is at least 1 octet
up to 128 octets. Now a user can choose buffer length without the need
for source code modification.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
For BR/EDR L2CAP, if the function bt_l2cap_br_chan_send_cb
instead of bt_l2cap_chan_send is called, the ACL conn and
L2CAP chennel status will not be checked.
Check conn/channel status before sending data in
function bt_l2cap_br_chan_send_cb.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
There are required DTS entries to nable peripherals required
for IPC communication between Radio and APP CPUs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There was missing storage partition that is required for setting
subsytem. Add missing entries to board files.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There are default configs that are provided by default for
e.g. nRF5340dk to enable HCI IPC communication type for
application domain and enable BT controller for radio domain.
These configs were missing for nRF54h20 DK.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This adds a board name that got missed in commit
8dc3f85622 (hwmv2: Introduce Hardware
model version 2 and convert devices)
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Clarify usage of __rom_region_end/size in XIP system.
When PMP is enabled, __rom_region_end should be padded to meet the
requirement of PMP entry, and the actual ROM region usage ends at
.last_section instead of __rom_region_end.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Updated ROM region padding to utilize LMA instead of location counter,
because the location counter has been assigned to 'RAM_BASE'.
Signed-off-by: Jimmy Zheng <jimmyzhe@andestech.com>
Explain the different versions of the MB1166 shield and
remove note about that version A09 is not supported
Signed-off-by: Erik Andersson <erian747@gmail.com>
Add support for the A09 version of MB1166 which
have a NT35510 panel controller instead of an
OTM8009a as in prior versions
Fixes#60888
Signed-off-by: Erik Andersson <erian747@gmail.com>
For now DSI settings are hard-coded for the specific
LCD module used on the STM32H747I Discovery board
Signed-off-by: Erik Andersson <erian747@gmail.com>
To support the NT35510 display, some additional
options needs to be configurable in the STM32
DSI peripheral
Signed-off-by: Erik Andersson <erian747@gmail.com>
eth_stats.h is using ethernet api but not including the header,
it must be working by luck in files that include it after
something else that includes ethernet.h, fix by just including it.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
With commit f419ea7990 (runner: linkerserver : remove the probe ID
hardcode), support was added to use serial numbers with the linkserver
--probe argument. However, one invocation of the argument was missed,
and still used the "probe index" syntax. Resolve this issue.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
With CONFIG_NET_POSIX_NAMES being deprecated, convert static
inlines in headers to prototypes, and move implementations
to lib/posix/options/net.c .
Since select and poll should technically also operate on
non-socket file descriptors, these may be relocated in the
future.
Below are some reasons for this change.
1. So posix calls are regular symbols and not directly inlined
as syscalls. This is also the most portable linkage type.
2. Many posix calls are cancellation points and additional
checks are necessary within the implementation.
3. The more we add to an inline call, the less sense it makes
for that call to be inline.
4. When the implementation of a posix function changes, the
interface for it should still remain consistent.
Note: the same principles have been applied in Zephyr's
posix implementation already, e.g. clock_gettime(), so this
is nothing new.
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Change the receive workque name to "BT RX WQ" to distinguish it from the
receive thread, and the long workque one to "BT LW WQ" to make the
format consistent with the other Bluetooth threads.
On an nRF52 now "kernel stacks" looks like:
0x200016c8 BT RX (real size 448): unused 280 )
0x20001780 BT RX pri (real size 448): unused 224 )
0x200012c0 BT RX WQ (real size 2240): unused 1360 )
0x20001208 BT TX (real size 768): unused 408 )
0x20001130 BT LW WQ (real size 1344): unused 408 )
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The Low Power Flexcomm driver manages the interrupt handling
and provides an API to register interrupt callbacks.
Register the NXP LPI2C interrupt handler.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
Update the driver to account for variations in the SDK driver
when it uses the instance number instead of the base address.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
LPFlexcomm is a MFD device hence select this Kconfig whenever
it is enabled.
Remove the selection from the individual driver Kconfig files.
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
When sending commands containing something like "AT+CFUN" the expected
regex was not escaped and as a result such regex never matched what has
been echoed over serial.
Escape all commands with re.escape() so that echoed shell commands are
always matched, even when they contain special characters (like '+' in the
example above).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
On some boards, there is not dedicated reset pin for GT911, it might
be the same pin with display IC, or might be tighted to a high level
voltage.
This patch makes the rst_gpio can be empty.
Signed-off-by: Jason Yu <zejiang.yu@nxp.com>
This commit enables PMP on the default revision of the SiFive HiFive1
board. PMP was already enabled on the Rev B of this board.
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
This commit sets `CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE=2048` for the
SiFive HiFive1 board. Otherwise, the test fails on the following assert
from Newlib:
memory space available for newlib heap is less than the minimum required
size specified by CONFIG_NEWLIB_LIBC_MIN_REQUIRED_HEAP_SIZE
Signed-off-by: Filip Kokosinski <fkokosinski@antmicro.com>
Set CONFIG_BT_MAX_PAIRED with same value as in host.
This is needed for CSIP tests with three lower testers:
CSIP/CL/SP/BV-07-C, CSIP/CL/SP/BV-03-C, CSIP/CL/SP/BV-04-C,
CSIP/CL/SPE/BI-01-C
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
Add pinctrl for SAI1 node. This means:
1) Adding definitions for the pads used by SAI1.
2) Creating a pin group and referencing it in
the SAI1 node via the `pinctrl-0` property.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add pinctrl for SAI1 node. This means:
1) Adding definitions for the pads used by SAI1.
2) Creating a pin group and referencing it in the
SAI1 node via the `pinctrl-0` property.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Add support for performing pinctrl operations. For now,
the only supported operation is applying the pinctrl default
state. Pinctrl is left optional to allow for scenarios in which
this is not required (e.g: AMP system in which another
OS configures the pinctrl).
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
