Renames the struct from bt_iso_cig_create_param to
bt_iso_cig_param as the same struct can, without
modification, be used to update the CIG as well
(function to support that will come in a later commit).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
A CIG may be updated later to include more CIS, and thus a slist
makes more sense.
The BIG doesn't need the change, but it makes more sense to
have similar handling for both.
This change also removes the requirement that the arrays
used to create the CIG/BIG need to static.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a macro to retrieve the iso data load length (the
length stored in the iso header) with a bit mask that
ensures that we only take the first 14 bits.
This is to remove any RFU bits that may have been set.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This commit adds the Media Control Service, and a dummy media player,
from the topic-le-audio branch. This is a part of the upmerge of the
le-audio media control files.
This service has been developed and maintained over a couple of years
now, and is mature. During the development it has passed both
IOP-testing and PTS qualification testing.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
- copyrights have been updated
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the media proxy from the topic-le-audio branch.
This is a part of the upmerge of the le-audio media control files.
The media proxy adds a common API to register and access local media
players, and to discover and access remote media players over
bluetooth using the media control client and a remote media control
service.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the Media Control Client from the topic-le-audio
branch. This is a part of the upmerge of the le-audio media control
files.
This client has been developed and maintained over a couple of years
now, and is mature. During the development it has passed both
IOP-testing and PTS qualification testing.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
- a macro for debug output of Object ID values has been (temporarily)
added to mcc.h, to avoid a dependency
- a blank line added after a declaration and an overlong line split,
to pass check_compliance
- copyrights have been updated
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Move the header file csis.h from the internal location to
the public include directory. This file is supposed to provide
the public API for CSIS and the CSIS client, but is not fully
complete yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) server.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
When an CIS is connected, the peripheral did not have
any information about the QoS settings. This commit
adds information about the PHY and SDU. For some reason
the peripheral won't ever have information about the RTN.
The remaining values in the event (interval, delay and
latency) are still not exposed, nor is framing or
packing, the latter of which are not part of the event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Implement setting the correct directed advertisers address
type in the Extended Advertising Report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
UUID values for the Content Control ID characteristic
The Content Control ID characteristic is a separately defined
characteristic used in the media control service and in the telephone
bearer service in LE Audio.
This commit is part of the upmerge of le-audio from the topic-le-audio
branch.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The filtering of periodic advertisements by scanner may be not needed
in certain situations e.g. while use of periodic advertising by BT ISO.
To make the code smaller and avoid execution of not needed code the
functionality will be conditionally compilable. It may be enabled
or disabled by use of CONFIG_BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING
Kconfig option.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
The commit adds helper macros for verification of disallowed
CTE types when periodic advertising synchornization is created.
The macros are added here, because they are directly related
with values specified by BT Core 5.1 specification.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Implemented host function for configuring vendor specific data path for
use with ISO, and fixed passing of path ID in setup.
Signed-off-by: Morten Priess <mtpr@oticon.com>
This allows application to increase channel's MTU and (in some cases)
MPS. When channel gets reconfigured dedicated callback is called to
inform application.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
In some HCI packed structures we place non-packed structs inside (in
particular the address structs).
Alignment is not an issue for those because all their members are just
byte-aligned, but size is. If the compiler ever packs those it would
become a real problem, and so detect this at build time.
See the link below for more info:
https://stackoverflow.com/a/66389167
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a new struct that provides information to the upper
layer when accepting an connected isochronous stream.
The CIG ID and CIS ID makes it possible for the upper layer
to determine which ISO channels are "together" in a group.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add the BT_ISO_SDU_BUF_SIZE which can be used to declare
the TX buffers for ISO, similar to the BT_L2CAP_SDU_BUF_SIZE
macro for L2CAP.
This also updates the ISO samples to use this as well
updating the SDU check to use
CONFIG_BT_ISO_TX_MTU/CONFIG_BT_ISO_RX_MTU without
subtracting the BT_ISO_CHAN_SEND_RESERVE to make the
API more clear.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The struct was declared twice (once as an opaque type) in
iso.h, but was unneeded. Removed to avoid confusion about
whether it is an opaque type.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The new inclusive naming terminology changes in v5.3 of the Bluetooth
specification affect the HCI layer, so apply all relevant changes to
align with it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
AMP functionality was removed from the v5.3 specification. Remove
AMP-related macros since they no longer map to anything in the spec
itself.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add #defines for the maximum and minimum allowed values for object
IDs.
Moves the #define for the directory listing object ID to the public
header file
Having these limits available is useful for applications wanting to
ensure they pass in (or handle) valid object ID values.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Object IDs are 48 bits, but are often carried in uint64_t variables.
This commit defines a mask value that retains the least significant 48
bits.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implements the Bluetooth appropriate language mapping for the Bluetooth
mesh subsystem.
Changes the following terms:
- Master security credentials -> Flooding security credentials
- Whitelist filter -> Accept filter
- Blacklist filter -> Reject filter
- Removes CDB's NODE_BLACKLISTED, which was not in use.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
To test fallback to remaining bearers PTS might request IUT to
disconnect one of the connected EATT channels, while the others remain
intact. Test function must be added, because we cannot create L2CAP
server on EATT PSM and manage this server as normal and have EATT
enabled at same time.
This is affecting GATT/SR/GAW/BV-14-C
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
When an ISO channel is disconnect on the central, it is
not deallocated, but merely disconnected. This is because,
as per the HCI spec, the CIS handle lives on in the CIG.
Instead of unref'ing the bt_conn to 0, we simply put the
channel and connection in the disconnected state.
This also fixes a few missing returns for
terminating a CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a sent callback to bt_iso_chan_ops so that the application
can be notified when an SDU has been sent. This can help the
application decide whether to queue up multiple, or only
have a single ISO PDU enqueue for reduced latency.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The HCI spec defines the BIS index range as starting from
index 0x01. We had previously implemented it such that it
starts from 0x00, and then simply adding 1 to the index
when sending over HCI. However, this may cause issue with
other HCI, or other SIG defined specification, commands
and events, and thus it is probably simpler if we just
use the HCI defined range.
This commit disallows BIT(0) (representing the BIS
index 0x00) to be set, and removes the addition
of 1 when sending over HCI.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the name of the bt_conn pointers to make it clear
whether the connection pointers are ACL or ISO connections.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The channels list were originally meant to be used
for multiple bt_iso_chan per iso connect (bt_conn), but
that is not the case for the current API, and won't be
going forward, so the use of the list has been removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for setting initial values in bt_vcs_register_param
when registering a VCS service
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
These constants are based on (i.e. exactly as) the
recommended values for regular (i.e. non-periodic)
advertising.
The GAP spec does not actually specifiy these numbers (or any
numbers for periodic advertising), but they are sane
numbers to use for periodic advertisement.
The issue with using the non-periodic advertising
whereas the peridic advertising unit is 1.25ms.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Update the connected ISO API to be more
similar to the broadcast ISO API as well
as the HCI spec.
This updated API allows for more flexibility
and will better support scenarios such as true
wireless setup, as ISO channels and connections
are more independent now.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The bt_sdp_get_add_proto_param is used to get the protocol
parameter from Additional Protocol Descriptor List.
In order to implement it, one parameter
(proto_profile_index) is added to sdp_get_uuid_data_index
to get the indexed item.
Fix one bug in sdp_get_uuid_data because there may be more
than 2 consequent "seq len item".
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Document the behavior of the include name option when this is changed by
updating the advertising parameters of the advertising set.
In this case we cannot update the advertising data since the host does
not have a copy to modify. The application will have to do update with
its current advertising data.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This commit adds missing API that allows to discard the Subscription
List of a vendor model.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
