Add Kconfig for STM32 LTDC driver
Add STM32 LTDC driver C source
Update display drivers CMakeLists with the new driver
Update display drivers Kconfig with the new driver
Signed-off-by: Tomislav Milkovic <tomislav.milkovic95@gmail.com>
Add devicetree node for IPC driver so that the IPC interrupt properties
can be accessed with device tree interrupt property macros and
configured using devicetree overlays.
Signed-off-by: Eivind Jølsgard <eivind.jolsgard@nordicsemi.no>
Co-authored-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Follow up on commit 37bf7cb
("dts/bindings: stm32: Set pinctrl-[0/names] properties as required")
Report lack of those fields soon at build to avoid cryptic
DT api build error messages.
Signed-off-by: Maciej Zagrabski <maciej.zagrabski@grinn-global.com>
Replace custom init code with the regulator infrastructure to enable the
Vin1 monitoring circuit.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
There's no in-tree driver for the A71CH secure element, which is the
code that should be responsible to control the chip reset line.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Replace custom init code with the regulator infrastructure to enable the
3V3 power rail.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Boards must only enable minimal peripherals according to the porting
guidelines. USB, I2C or ADC are not in the minimal list.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Extend the CAN driver timing tests to cover data phase timing on CAN-FD
capable CAN controllers.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Extend the CAN driver timing calculation test verification to cover the
sjw and prescaler values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Convert can_calc_timing() + can_calc_timing_data() to syscalls and use
the newly added syscalls calls for determing the minimum/maximum
supported timing parameter values.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add CAN system calls for getting the minimum/maximum timing values
supported by a given CAN controller device driver instance:
- can_get_timing_min()
- can_get_timing_max()
- can_get_timing_min_data()
- can_get_timing_max_data();
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Pin control DTSI files need /omit-if-no-ref/ property to reduce
generated devicetree size and improve build times.
Fixes#44262
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
In cmake we use target_byproducts() to register dependence on the map
file alongside the executable for it - this makes sense.
Thus if the map file is missing, ninja will detect and issue a linker
command again. However after that, cmake was instructed to rename the
map file. Thus a 2nd round of ninja, which should be a no-op, is not as
the registered byproduct file is missing.
To keep this static, and to keep the map file alongside the elf file, we
will instead copy the map file.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Improve documentation
- Add a photo of the board
- Add hardware information from the board manual
- Fix options for build (set OPENOCD_DEFAULT_PATH to make it
valid for also windows environment)
- Improve the build instructions to make it easier to understand
Signed-off-by: Yuichiro SAGISAKA <yu.sagisaka@fujitsu.com>
Timestamps can be 32 or 64 bit long based on the platform and
build configurations. The proper way to handle these timestamps
is to use the ad-hoc log_timestamp_t variable.
This patch fixes some timestamp's reference which were still
using uint32_t changing them to log_timestamp_t.
Moreover also a new config is added in order to print the
timestamp as the Linux's kernel format. This might be useful
in AMP platforms in which Linux's and Zephyr's logs must be
interleaved in order to get a more comprehensive log solution.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
This commit overrides the toolchain internal `__INTN_C(value)` integer
constant macros to match the types defined by the `zephyr_stdint.h`
header.
For more details, refer to the GitHub issue #44199.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Reset the ESP modem inside the device initialisation function so that
errors can be detected through the use of `device_is_ready`.
Fixes#43891 for this driver.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Move the network device instantiation macro to above the esp_init
function so that static variables declared by the macro are visible to
the init function.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
The purpose of this change is to allow to enable more than one
backend at once by removing choice from ipc-service backend Kconfig
and depending backend Kconfig option on existing of correct compatible.
Overwriting IPC_SERVICE_BACKEND option in some places is removes
as no longer needed.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
The unicast client takes a reference to the ACL, but did
not return the reference when the ACL disconnected, but
rather just reset everything.
Modified to detach the stream, ensuring
a bt_conn_unref on ACL disconnect.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
f4df23c9 added dependency on ASSERT to some options prefixed
with ASSERT_ assuming that they are no used elsewhere. Turned
out that there are subsystem specific assert macros (e.g. BT_ASSERT)
which relies on those options. Removing the dependency.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Ports the SOF DesignWare DMA code to Zephyr.
Effectively replaces much of what was the designware driver as this
driver enables scatter gather which the older driver did not.
* Enables cyclic transfer description lists when the cyclic config
param is given.
* Enables linear link position usage with cAVS GPDMA.
* Passes suspend/resume, scatter/gather tests.
* Provides status updates of the transfer through dma_get_status()
* Enables reloading a cyclic transfer with dma_reload()
* Enables dma handshakes using the dma_slot config param.
* cAVS specifics remain in the dma_cavs_gpdma driver.
Co-authored-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Co-authored-by: Tom Burdick <thomas.burdick@intel.com>
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adds to the dma_status struct the number of free bytes available
in the current transfer buffer.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Adds a bit flag config option for cyclic transfer lists, where the
transfer list tail may link to its head creating a never ending
loop of transfer descriptors.
DesignWare DMA supports such cyclic transfers.
Signed-off-by: Adrian Bonislawski <adrian.bonislawski@intel.com>
Fix all syscon dt bindings clock constants to avoid any overlap, to
prevent case statement in mcux syscon clock driver from failing to
build.
Fixes#44216
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
SMP support might not work if esp_mp.c initialization code
is placed in ROM area. This fix that scenario.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Don't use the old gpio_dev spi_cs_control's member
since it's been deprecated in favor of gpio_dt_spec.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
When the application requests `CONFIG_FLASH`, then automatically
enable the flash driver using `CONFIG_SPI_NOR`.
Signed-off-by: Casper Meijn <casper@meijn.net>
Considering that in most scenarios, bt_rand will not be called
frequently, but the current implementation of tinycrypt will
occupy more than 300 bytes of RAM space. Its existence is to
optimize the frequent call of bt_rand.
Therefore, it is considered to put it into a config
(`BT_HOST_CRYPTO_RANDOM`), when this config has been selected,
will use tinycrypt library for random. Otherwise will call bt random
hci command.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Since Zephyr SDK is now supported on all major operating systems, there
is no need to restrict it to "on Linux."
This commit also removes an endorsement of the GNU Arm Embedded
toolchain because there is no need to recommend and/or use it anymore
for the aforementioned reason.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
