Adding the ability to set and get pthread names by defining
some non-standard extension functions that were first
introduced by Glibc.
Similar to zephyr thread naming, these allow for thread
tracking and debugging even when using the more portable
posix API.
Though Glibc was the originator, the current POSIX functions
have return codes based on Oracle's adopted spec, so these
functions follow suit. The Oracle and Glibc function
prototypes match.
Signed-off-by: Nicholas Lowell <nlowell@lexmark.com>
This allows flash_img.c to be used outside of mcuboot scope.
Add new call to not break existing code.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Add a simple test to verify that the bind() can be called multiple
times if AF_PACKET is set and there are multiple network interfaces
in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The UART API now supports configure and configure_get functions,
however no tests were written for those functions. This
commit adds the framework and implementing tests for configure
and configure_get for UART API.
Fixes (#12872)
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
* arc supports mpu gap filling now.
* these tests can be used for any arch which supports mpu gap
filling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Extend the bad syscall-ID test case to cover
erroneously supplied larged unsiged syscall-ID
values.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
To ease maintenance of samples and tests some SoCs define
CONFIG_WDT_DISABLE_AT_BOOT=y to disable the watchdog. Ensure the option
is set to n for samples and tests that require watchdog module not to be
disabled during boot.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Test case for IPv4 header options was added but
CONFIG_NET_IPV4_HDR_OPTIONS option was not enabled.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Wrong option length in IPv4 header options testcase
added. This should cover malformed packet case.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The test checks for a correct implementation if HWINFO_HAS_DRIVER
is set, otherwise it checks for -ENOTSUP return value.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
The service registration logic was using the wrong variable to check for
a pending service to be registered, which led to the same service being
registered twice in some cases. Fix the logic so that a pending service
is only registered once.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Under Sharing FP registers mode we would like to verify the
correct preservation of FPSCR during thread context switch.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add missing dependency in mesh.conf.
Handles this warning: Warning: BT_MESH_SHELL was assigned the value 'y'
but got the value 'n'. Check these unsatisfied dependencies:
BT_MESH_HEALTH_CLI (=n)
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Remove CONFIG_CONSOLE_HANDLER from project configuration. When building
for native_posix this produces the following warning:
warning: CONSOLE_HANDLER was assigned the value 'y' but gotthe value 'n'
Check these unsatisfied dependencies: SERIAL_SUPPORT_INTERRUPT (=n)
The shell works without this option since this is handled by the shell
itself instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
While testing statvfs operation, same mount path has been tested twice,
instead of two different mount points as intended.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
Since we enable CONFIG_ASSERT in the tester app, the logging subsystem
will assert if it detects a missing log_strdup. Add the two missing ones
that I could find to properly log transient strings.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP command to set MITM, although on Zephyr this is not
configurable at runtime. Instead print a warning instructing to use the
CONFIG_BT_SMP_ENFORCE_MITM Kconfig option instead.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Implement the BTP GAP command and event for passkey confirmation.
This also allows us to set the passkey_confirm auth callback which
enables the keyboard/display IO capabilities.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Since some tests require MITM to be off, disable the option that forces
the MITM flag at all times.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Disable stack measurements by default, since they pollute the log
output.
Ensure that the logging thread has enough stack.
Ensure that the UART that connects to the BTP client is
interrupt-driven.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Added simple test case for net_pkt_clone() to verify
cursor position after cloning.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add a configuration file for the nRF52840 DK so that it uses RTT for
debugging and enables more protection measures.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
- Use the built-in mechanism for configuration overlays
(having a boards/ folder with <board>.conf fragments)
- Clean up variables that were giving warnings
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit contributes a simple test-suite which verifies the
internal (ARCH) implementation for user mode syscalls, as well
as the stack limit checking mechanism for ARMv8-M MCUS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Hammer all CPUs with multiple threads all making system calls
that do memory allocations and buffer validation, in the hopes
that it will help smoke out concurrency issues.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Distinguish between nRF51/nRF52 and nRF53 platforms in the
inline comments when definining the built-time asserts for
the test.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The commit fixes the test for nRF5340-based platforms by
customizing the ISR offset and the IRQ vector table.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Count existing threads before the test has started to deal with
platforms that have some existing services.
Remove hard-coded accounting for IPM, this is now counted before the
test starts.
Fixes#21756
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is aligned with the documentation which states that an error shall
be returned if the work has been completed:
'-EINVAL Work item is being processed or has completed its work.'
Though in order to be able to resubmit from the handler itself it needs
to be able to distinct when the work is already completed so instead of
-EINVAL it return -EALREADY when the work is considered to be completed.
Fixes#22803
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Encode all types of EDTT command response with similar structure to how
it is generated from command complete when it is generated from the
command status.
This structure will be:
2 byte EDTT command response code
2 byte EDTT length field
1 byte HCI status
N bytes of command output parameters
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Enable tests that was disabled due to test failure. Test have been
updated and are now passing.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
This works around an issue with this emulator's configuration where
there is no memory address that can be poked to generate a fault,
it is simulating memory for the entire address space.
Fixes: #22561
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The newlib full malloc implementation (i.e. non-nano) requests a
relatively large 4096-byte memory chunk through `_sbrk`, which exceeds
the configured 512-byte heap size.
This commit changes `CONFIG_NEWLIB_LIBC_ALIGNED_HEAP_SIZE` from 512 to
8192 in order to increase the size of the heap memory used by the
newlib malloc function.
For more details, refer to the issue #21167.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
NEWLIB_LIBC_NANO defaults to y when building with a toolchain that
supports nano.specs and this was causing the libraries.libc.newlib
test to link with the newlib nano variant (libc_nano.a) when it should
be linking with the normal newlib (libc.a).
By setting CONFIG_NEWLIB_LIBC_NANO=n in prj_newlib.conf, we make sure
that the libraries.libc.newlib test links with the normal newlib.
For more details, refer to the issue #21167.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
After running command --list-test-duplicates
I found out that some test cases have same names (duplicated).
To get rid of it, I decided to change names in .yaml files
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Replace Kconfig configuration data with devicetree bindings using
(ADC) io channels. Rework the sample to document expectations about
the relationship between the reference voltage and the divider input
voltage, and update the sensor configuration to support Nordic SAADC.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Replace Kconfig configuration data with devicetree bindings using
(ADC) io channels. Rework the sample to document expectations about
the relationship between the reference voltage and the divider input
voltage, and update the sensor configuration to support Nordic SAADC.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The test case no longer permits inferring input and output pins based
only on the presence of GPIO aliases. Stop allowing presence of GPIO
aliases to enable the test.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
