Fix bt_gatt_indicate using the wrong attribute pointer when a uuid was
provided as input.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The path to include/drivers should not be in the compiler include path
list, only include/. In order to make this possible, always explictly
refer to hci_driver.h via the drivers/bluetooth/ path and not only
bluetooth/.
Fixes#21974.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Current implementation of application's cfg_write callback only has the
possibility of returning boolean status, which in case of failure only
allows for one error code; BT_ATT_ERR_WRITE_NOT_PERMITTED.
This change makes the application able to add own security check on
characteristic subscription in the cfg_write callback and report a more
relevant error code (e.g. BT_ATT_ERR_AUTHORIZATION).
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
This further reduce the overhead on each subscription at expense of
having a dedicated array to store subscriptions, the code now maintain
a separate list for each peer which should also scale better with large
number of subscriptions to different peers.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This should reduce the footprint on applications that do a lot of
requests i.e have a lot of subscriptions.
Fixes#21103
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Providing 'tmp', which was never updated, resulted in removeal of
subscriptions from the beginning.
Using the updated 'prev' resolves this.
Signed-off-by: Marco Sterbik <madbadmax00@gmail.com>
Check that the bluetooth device has in fact been initialized before
continuing with public API calls. This could lead to crashes when using
state that has not yet been initialized.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
When set, the BT_GATT_SUBSCRIBE_FLAG_NO_RESUB flag indicates that the
subscription should not be renewed when reconnecting with the server.
This is useful if the application layer knows that the GATT server
persists subscription information.
Signed-off-by: François Delawarde <fnde@oticon.com>
Fix issues that surfaced when trying out GCC 9.2, official release name
gcc-arm-none-eabi-9-2019-q4-major, both related to invalid pointers in
GATT when declaring UUIDs in if-scope.
1. Fix the discovery callback giving an invalid pointer in the discovery
callback in two instances.
2. Fix gatt_find_type sending invalid data during discovery procedure.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix ATT MTU size of length variables resulting in wrong length values
reported to the user. Communicating with an Android device using an MTU
of 517 resulted in write commands reported as length 2 instead.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Since bt_conn_send_cb can fail to send buffer causing it to unref this
may cause buffer leaks as the caller is not aware of the error assuming
the buffer could be sent.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fix GCC9 warning "warning: taking address of packed member of
'struct sc_data' may result in an unaligned pointer value"
Issue is that the on-air structure of sc_data was re-used for the gatt
service changed data.
Added build assert because data is stored in settings, so the structure
should be the same size to be compatible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Move functions in order to avoid function prototype and use IS_ENABLED
instead of #if defined where possible.
Signed-off-by: François Delawarde <fnde@oticon.com>
This commits adds a BT_SETTINGS_CCC_LAZY_LOADING option to allow for
CCC settings to be loaded on demand when a peer device connects in
order to reduce memory usage.
Signed-off-by: François Delawarde <fnde@oticon.com>
Maintain Service Changed entry as long as the peer device is subscribed
to SC indications and bonded. This allows to save indication data for
disconnected peers peers when CCC settings are not available (loaded
on-demand).
Signed-off-by: François Delawarde <fnde@oticon.com>
Fix GATT buffer leak when bt_att_send returns error the allocated
buffer is never freed. Discovered case where the link was disconnected
during the function call, so when GATT checkd the link was still
connected, but ATT checkd the link was disconnected.
Fixes: #19889
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix bug in bt_gatt_attr_next when given an attribute that has static
allocation. The handle is then 0 and the function would always return
the attribute with handle 1.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add public API function in GATT to check if a specific connection has
subscribed to the given attribute.
Without this function the application has to keep track of which
connections has subscribed using the callbacks from BT_GATT_CCC_MANAGED
since the cfg_changed callback of the CCC doesn't carry connection
context.
The other alternative is for the application to parse the information
in the struct _bt_gatt_ccc object. Although this object has structure
information available to the application the structure is marked as
internal, so the application shouldn't rely on this definition.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Add support for persisted Service Changed data, to fix the case of a
paired device not reconnecting before a reboot and thus not receiving
SC indication. It also enables support for GATT database being changed
during a firmware update.
Move Service Changed data outside of the CCC struct and make it
persistent by adding support for a bt/sc/... setting.
Signed-off-by: François Delawarde <fnde@oticon.com>
The Service Changed characteristic support should also work when the
GATT database has been modified after reboot (firmware update scenario)
This commit introduces a BT_GATT_SERVICE_CHANGED config option that is
independent from BT_GATT_CACHING and BT_GATT_DYNAMIC_DB.
Signed-off-by: François Delawarde <fnde@oticon.com>
Calling indicate or notify on a disconnected connection object would
result in the error code ENOMEM when failing to acquire buffers instead
of the expected return code ENOTCONN.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
This moves check_perm code under GAT and make use of it to check if CCC
write permission can be attended by the connection security level or if
it needs to be increased.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to set different permissions to CCCD so security can
be checked when enabling notification which conforms to:
BLUETOOTH CORE SPECIFICATION Version 5.1 | Vol 3, Part G page 2360:
'3.3.3.3 Client Characteristic Configuration
Authentication and authorization may be required by the server to
write the configuration descriptor.'
In addition to that also ensure that notification are not re-enabled
until the proper security level is reached to conform to the following
statement:
'10.3.1.1 Handling of GATT indications and notifications
A client “requests” a server to send indications and notifications
by appropriately configuring the server via a Client Characteristic
Configuration Descriptor. Since the configuration is persistent
across a disconnection and reconnection, security requirements must
be checked against the configuration upon a reconnection before
sending indications or notifications. When a server reconnects to a
client to send an indication or notification for which security is
required, the server shall initiate or request encryption with the
client prior to sending an indication or notification. If the client
does not have an LTK indicating that the client has lost the bond,
enabling encryption will fail.'
Fixes#17983
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CCC storaged is no longer declared separetly so check if ccc->cfg
matches with sc_ccc_cfg no longer works so instead use the cfg_changed
callback and match against sc_ccc_cfg_changed.
Fixes#19267
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This removes the necessity of registering the storage for CCC and make
it part of the declaration itself.
Fixes#18547
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds support to provide an UUID to bt_gatt_indicate so API user
don't need to hardcode the attribute offset by hand.
Fixes#18572
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the dead code when parsing Find Information response since
the index counter can never be zero, instead it checks there are any
attributes found and if there nothing don't proceed with discovering
which was the original intent of the now dead code.
Fixes#18384
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When the database changes and a client becomes change unware it should
also clear the out of sync flag as the following request should return
an error:
Core Spec 5.1 | Vol 3, Part G, 2.5.2.1 Robust Caching:
'The error response is sent only once after the client becomes
change-unaware, unless the client disconnects or the database changes
again before the client becomes change-aware in which case the error
response shall be sent again.'
Fixes: #18183
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes the following crash:
ASSERTION FAIL [0] @ ZEPHYR_BASE/subsys/logging/log_core.c:180
argument 2 in log message "%s: Stored CCCs for %s (%s)"
missing log_strdup().
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Core 5.1, Vol 3, Part F, 3.3.1
"Multi-octet fields within the GATT profile shall be sent least
significant octet first (little-endian) with the exception of the
Characteristic Value field. The Characteristic Value and any fields
within it shall be little-endian unless otherwise defined in the
specification which defines the characteristic."
Fixes: GATT/SR/GAS/BV-02-C
Fixes: #17857
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This introduces a new flag (BT_GATT_SUBSCRIBE_WRITE_PENDING) which is
set when a write operation requires canceling before the parameters can
be reused.
Fixes#17534
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Submit GATT database hash as a delayed work to prevent it being run
twice if we register dynamic services.
Signed-off-by: François Delawarde <fnde@oticon.com>
Handle optional argument UUID in bt_gatt_discover with type
DISCOVER_DESCRIPTOR, bt_uuid_cmp doesn't check for NULL pointer.
On system with MMU (nrf52_bsim) this can result in segfault.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix an issue in the gatt_register routine where removing a service and
adding it again would cause the database to have non-ascending
orderdered handles numbers and lead to an incomplete service discovery.
Fix: Go through the database and look for a place where to insert
the new service.
Signed-off-by: Arthur Crepin-Leblond <arthur.crepin@proglove.de>
move misc/util.h to sys/util.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move misc/byteorder.h to sys/byteorder.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move atomic.h to sys/atomic.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Updated the bluetooth module to use static handlers. Removed the
old bt specific static registration.
The routine bt_settings_init() is still calling settings_init() which
IMO is not needed anymore.
Updates:
changed SETTINGS_REGISTER_STATIC() to SETTINGS_STATIC_HANDLER_DEFINE()
changed settings_handler_stat type to settings_handler_static type
removed NULL declarations
renamed bt_handler to bt_settingshandler, as bt_handler already exists.
renamed all bt_XXX_handler to bt_xxx_settingshandler to avoid any
overlap.
changed SETTINGS_STATIC_HANDLER_DEFINE() to create variable names from
_hname by just prepending them with settings_handler_.
updated all bt_xxx_settings_handler to just bt_xxx.
Signed-off-by: Laczen JMS <laczenjms@gmail.com>
Although the Characteristic Value descriptor is required to be
immediately after the characteristic descriptor, the specification
allows for gaps in the corresponding Attribute handles. Use the value
handle from the characteristic descriptor for value reads.
See BLUETOOTH CORE SPECIFICATION Version 5.1 Vol 3, Part G section 2.5.1
(p. 2345), first paragraph.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fix iterating past the response which causes an invalid memory to be
accessed and passed over to the callback as if there were more
attributes found.
Fixes#16602
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
