Add implementation to generate node rx for missing ISO PDUs
and set the status as invalid. This is required for ISOAL to
correctly track the sequence numbers for every SDU interval.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add Kconfig to limit the Primary Advertising Interval and
Periodic Advertising Interval maximum supported values in
the Controller implementation.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The bt_audio_stream_qos function checked if stream->ep was
NULL before checking if the stream were even valid for this
QoS procedure.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When create the CIG for a unicast group, we did not
verify whether stream->iso was NULL before attempting
to use that to create the CIG.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Socket offloading has been in the tree for a while and improved a lot
over time (from a simple define-based API override to a complex
vtable-based solution, supporting mutliple offloaded interfaces). As the
feature is heavily used by certain vendors (Nordic and its nRF Connect
SDK), I propose to move it out of experimental phase.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
None of the common DF configs should depend on using BT_LL_SW_SPLIT.
Added dependencies to it where this was the case.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
These configurations are tighlty coupled to the implementation,
so these should be hidden when not using BT_LL_SW_SPLIT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Some controllers may support only TXing or RXing CTE.
As all DF features are guarded by BT_CTLR_DF, we need to ensure
that it is possible to select those when only TX or RX is available.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This updates the documentation of bt_gatt_is_subscribed function that
can take a bitfield of BT_GATT_CCC_NOTIFY and BT_GATT_CCC_INDICATE.
This might be useful if one wants to test if peer is subscribed, but
does not matter which method was used.
The gatt.c implementation handles API usage already, because it performs
bitwise AND:
if (bt_conn_is_peer_addr_le(conn, cfg->id, &cfg->peer) &&
(ccc_value & ccc->cfg[i].value)) {
return true;
}
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Adds a log backend that maintains a ringbuffer in coordination
with cAVS HDA.
The DMA channel is expected to be given some time after the logger
starts so a seperate step to initialize the dma channel is required.
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
LwM2M engine is blocking new notification send.
Notification or Send timeout trig Reconnect and registration state.
Send/Notification message is blocked if client is not connected.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
In case a connection is encrypted received PDU is decrypted by CCM.
CCM does not encrypt/decrypt S1 byte that stores CTEInfo.
In case of reception of a PDU by encrypted connection there is missing
CTEInfo in a memory where CCM stores decrypted PDU.
The CTEInfo data must be copied from scratch packet.
The commit adds code responsible for copying of the CTEInfo into
target PDU memory.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
When bootstrap is used, the server object shouldn't be autocreated.
Automatically creating object may cause problems after bootstrap
has been done and bootstrap server deletes and creates instances
for server object. In the next boot the auto-created server object
may have clashing server_id with the server object that the
bootstrap-server has created.
Also lifetime wasn't properly added to the registration message from
the server object.
Signed-off-by: Jarno Lamsa <jarno.lamsa@nordicsemi.no>
Added return code for for lwm2m_rd_client_start() & lwm2m_rd_client_stop().
lwm2m_rd_client_start() return -EINPROGRESS when start is in progress and
0 for success.
lwm2m_rd_client_stop() return -EPERM when context is unknown and
0 for success.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Previously, the att_mtu_updated callback was only called on initial
connection of the channel or during the MTU Exchange procedure. There
was no way for the application to know that the MTU increased in the
case where the peer initiated the reconfiguration.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
Bluetooth Host calculated authentication value correctly only
for data smaller than 255 bytes. If data is larger then
authentication transformation used wrong flags.
Since the issue was symmetric two Zephyr
based devices were able to understand each other. Hence,
other devices like Android or IOS smartphones weren't able
to authenticate large frames and broke communication.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
This complements the Kconfig possibility, and allows setting an
interface as default on runtime. Changing the default interface also
works around limitations when trying to use an offloaded interface
together with a native one.
Signed-off-by: Ole Morten Haaland <omh@icsys.no>
Adding a reference implementation of the Non-Volatile Memory module
needed to join any LoRaWAN network.
This NVM is based on the SETTINGS subsys to store all the required
key to join and communicate on a LoRaWAN network.
Without proper NVM, one may experience errors when using OTAA
to join the network, as the device may violate anti-replay
protection (depending on the version of LoRaWAN).
Signed-off-by: Giuliano Franchetto <giuliano.franchetto@intellinium.com>
Add SDMMC driver to subsystem. SDMMC driver will handle initialization,
as well as SDMMC I/O. SD mode support is currently supported, SPI mode
support is not.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
All SD cards require SD CMD0 (reset) and CMD8 (send IF cond) at boot.
Add this portion of the initialization flow to SD subsystem, as well as
query command to check if card is SDIO.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Fixed the issue when sometimes "update" is not called for the
last RXRDY signal. First, need to reset the signal and only
after that need to call the "update" function.
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
Keys' order - bn, n - might differ from the default due to
Length-First Map Key Ordering rules.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Regenerates the encoder and decoder. Treats integers and floating-point
values as separate entities instead of saying that those are numerical
values. Brings some memory savings.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
Makes possible to write an empty CBOR array if there are no SenML CBOR
records that needs to be written. This came up when trying to delete a
portfolio object instance.
Signed-off-by: Veijo Pesonen <veijo.pesonen@nordicsemi.no>
The peripheral is configured to update the connection
parameters for 5 seconds by default.
There is an abnormal situation with a very low probability.
The central actively disconnects or abnormally disconnects the
Bluetooth connection at the same time.
At this time, the connection disconnection event will be
handled by BT RX.
At this time, sysworkq has sent a parameter update request and
will receive a reply with status = 0x02, because the handle is
invalid at this time.
We can not just cancel work, because work->flag may be
in K_WORK_RUNNING, so work->flag is set to K_WORK_CANCELING
and subsequent conn_cleanup will unable call k_work_rescheduler
successfully.
According submit_to_queue_locked will return ret = -EBUSY.
if (flag_test(&work->flags, K_WORK_CANCELING_BIT)) {
/* Disallowed */
ret = -EBUSY;
As a result, the connection cannot be cleanup correctly.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Added macro SHELL_SUBCMD_SET_CREATE which creates a set of subcommands.
SHELL_SUBCMD_ADD and SHELL_SUBCMD_COND_ADD can be used from any file to
add command to the set. This approach allows to have subcommands added
from multiple files.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Client jump to full registration state if registration update fail.
Update keep already opened DTLS session.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
Enabled DTLS session cache for support session resume.
Fixed LwM2M queue mode for close connection and reconnect automatically.
Re-connect will do Registration update before it send queued data.
Session resume is helping a case when NAT change address and cause less
network traffic.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
When sending 2 or more confirmable message before first one is
writed to socket all messages use same coap pending structure.
Now coap_pending_init() set data pointer which lock allocation
by each call.
Using data pointer for detecting free is more stable than timeout.
Timeout is initialized only before first socket send. Queued packet
may be triggered later than other and may cause that same block is
allocated multiple time.
Signed-off-by: Juha Heiskanen <juha.heiskanen@nordicsemi.no>
The audio stream should be detached from the endpoint
when the endpoint goes into the releasing state, instead
of the idle state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
ase_process had a check for the IDLE state, but the
check did not do anything, so was removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The releasing state does not trigger any stream ops,
but will be a no-op case to avoid the error log
message.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add a greedy option to pdu_is_expected() to make sure the procedure
processes all unexpected control PDU in all cases.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/CEN/BV-14-C,
Central Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Add support for both LL_REJECT_IND and LL_REJECT_EXT_IND when waiting
for the the response to the LL_ENC_REQ and LL_START_ENC_REQ.
Add unit test to test both LL_REJECT_IND and LL_REJECT_EXT_IND as
responses to LL_ENC_REQ.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Chose correct rejection PDU based on features supported on remote peer
when rejecting due to missing LTK.
Update unit test setup with faking that a feature exchange procedure
has run.
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
Terminate connection with a MIC failure if an unexpected control PDU
is received during the Encryption Start procedure.
Add unit test inspired by Bluetooth Qualification test
LL/SEC/PER/BI-05-C,
Peripheral Receiving unexpected PDU during encryption start
Signed-off-by: Thomas Ebert Hansen <thoh@oticon.com>
