Toggling `CONFIG_USERSPACE` to `y` results in compilation
errors caused by the fact that various k_* functions don't
have their prototypes included in the SCMI sources (e.g:
`k_mutex_*`, `k_sem_*`, `k_is_pre_kernel()`).
To fix this, switch to using the `kernel.h` header instead
of `sys/mutex.h`. Previously, this worked because `sys/mutex.h`
included `kernel.h` if `CONFIG_USERSPACE` was set to `n`.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
When running on native_posix, the thread needs to be created
before the thread name can be set.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
This will update the posix thread names to match
the zephyr thread names.
This will simplify debugging as the debugger will
recognize the thread names.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The intention of this API is to allow setting the posix thread
name equal to the zephyr thread name.
By defining it as an arch interface, the implementation becomes
generic.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Newer Xtensa toolchain needs to include xtensa-types.h so that
macros in tie.h can be used without compilation errors.
The exact verison needing this is unknown but first encountered
in RJ-2023.2. Tested with older toolchain and that did not
cause any compilation errors so just include xtensa-types.h
if xt-clang is used. Haven't seen newer toolchains being
generated with xcc, so skip that for now.
Note that Zephyr SDK and the public HAL in Zephyr do not provide
this file.
Signed-off-by: Anthony Giardina <anthony.giardina@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The gtest 1.15 has slightly different output from the original one that
was used to set up the harness. With this change we support both output
formats.
Fixes#72318
Signed-off-by: Yuval Peress <peress@google.com>
Fixes the adxl345 accelerometer driver to return zero on sample fetch
success, as specified by the sensor driver API. Prior to this change,
the driver incorrectly returned a positive non-zero value on sample
fetch success, which in turn caused a bus fault getting data with the
sensor shell.
Signed-off-by: Maureen Helm <maureen.helm@analog.com>
Initialize the missing chunk field when canceling a BLOB Transfer.
If you canceled a BLOB Transfer, the missing_chunk was not cleared in
the next BLOB Transfer. This can make it look like there are still
missing chunks, even though all chunks in the block have already been
received, and it does cause bugs.
Signed-off-by: Junho Lee <tot0roprog@gmail.com>
IMXRT11XX secondary core should not deinit ENET PLL
as it could be configured by primary core.
Signed-off-by: Anders Bjørn Nedergaard <abn@polytech.com>
Add test suite for remove of zephyr native libc
Signed-off-by: Chris Friedt <cfriedt@tenstorrent.com>
Signed-off-by: Karthikeyan Krishnasamy <karthikeyan@linumiz.com>
Add checks to return value of esp_intr_alloc to avoid drivers init
returning 0 when interrupt allocation fails.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
Adding macros to convert and validate input config from device tree
for IRQ priority and flags.
Signed-off-by: Raffael Rostagno <raffael.rostagno@espressif.com>
This commit moves the test buffer from ITCM (not accessible by DMA) to DTCM
on several NXP boards, to make the test successful.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
This commit places the chan_blen_transfer DMA test's TX and RX buffers
in a separate file that gets entirely relocated. This ensures that the
buffers reside in the correct memory, without breaking other things
due to relocation of test data/code.
Fixes#75676.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
Initial commit for entropy support on RA8
- drivers: entropy: implementation for TRNG driver of RA8x1
- dts: arm: add device node for trng of RA8x1
- boards: arm: enable support zephyr_entropy for ek_ra8m1 and
update board documentation
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
Fix compilation by providing an overlay file for cpuapp.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Fix compilation by defining the watchdog flags for nRF9280 as well.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Add board support for Application, Radio and PPR cores
of the nRF9230 SoC / nRF9280 SiP on the nRF9280 PDK board.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
The nRF9280 is a SiP (System-in-Package) consisting of the nRF9230 SoC
and additional components such as PMIC and others. Additionally,
the nRF9230 contains several CPUs, similarly to the nRF54h20 SoC.
Update nrfx glue, and add necessary Kconfig and initialization code
to allow building for nRF9280 targets: CPU, Radio and PPR cores.
The nRF9280 is used for all user build targets and Kconfigs,
whereas the nRF9230 is used as the build target for the MDK.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Move mpu_region.c to common folder, to re-use with nRF92.
Rename it to nrf54hx_nrf92x_mpu_regions.c to indicate
which product series it applies to.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Add definition of the nRF9280 SiP with its Application,
Radio, and Peripheral Processor (PPR) cores and a basic set
of peripherals: GRTC, GPIOs, GPIOTE, and UARTs and few others.
Signed-off-by: Emanuele Di Santo <emdi@nordicsemi.no>
Co-authored-by: Andreas Moltumyr <andreas.moltumyr@nordicsemi.no>
Monitor mode relies on core Wi-Fi management functions, so, the file
should be included for both system and system with raw modes.
Fix this by adding a hidden symbol.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
If Wi-Fi management is enabled, then independent of modes scan
functionality is always included.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is a fix from QSPI-NOR driver to wait for clock divider change to
be applied and take effect.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For less than 32MHz using HFCLK192M, /2 divider should be used and only
for Anamoly159 /1 divider should be used.
Without this fix 8MHz clock in DTS uses 16MHz clock.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
SHEL-2947] Option to set either PS-poll or QoS null frame based
power save data retrieval mechanism.
Signed-off-by: Ajay Parida <ajay.parida@nordicsemi.no>
Removes the requirement for the different layers in the OS agnostic
parts of the driver having to maintain a handle to the OS interface
layer in order to call the OS interface calls. The OS interface layer
now maitains the handle to OS-specific ops internally and invokes the
appropriate functions.
Fixes SHEL-2639
Signed-off-by: Sachin D Kulkarni <sachin.kulkarni@nordicsemi.no>
