The notify handle in the BAP broadcast assistant did not handle
conn == NULL properly, and neither did delayed_bap_read_handler.
Add better NULL checks, which also fixes a coverity issue.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The callback is only ever called when we received a
notification from the BASS server that the receive state is
removed, which cannot contain an error code.
Thus it does not make sense for the callback to have an
error code.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added a check for checking duplication when adding a source in the
broadcast assistant, as per requirement in BAP 6.5.4. It is not
permitted to add a source such that a combination of broadcast_id,
adv_sid and address type would result in same triple of values.
Added a recv_state struct to cache these values when read, and moved
past_avail and srd_ids into this as well.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add additional logging in past_available to easily see the PAST
support of the broadcast assistant and scan delegator devices.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
While refactoring the handling of callbacks the setting of past_avail
status got deleted (and it was in the wrong place). Adding it back at
the correct place.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The existing implementation allows for only one callback per procedure.
This creates problems when for example adding CAP functionality.
The callbacks are here implemented as an SLIST
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The shift is currently necessary due to a mismatch of the
specs and the API, but the shift should not be done when
the value is BT_BAP_BIS_SYNC_NO_PREF as that is a special value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The Broadcast Assistant API should be fully independent of the scan
delegator. Therefore the new struct bt_bap_bass_subgroup has been
defined to avoid a dependency.
Fixes: #68338
Signed-off-by: Ping Wang <pinw@demant.com>
The LE Audio implementations do not really support bonding yet,
and removing subs on disconnect is the most effective (and correct)
way of ensuring that we do not subscribe more than once when we
re-discover after reconnection.
The broadcast assistant and the media control client does not
support multiple connections as of this commit, so they needed
special treatment. In the case that we do discovery on multiple
ACL connections, it is important that the existing subscriptions
are removed correctly by calling bt_gatt_unsubscribe.
In order to implement this change properly on some of the clients,
thet had no proper connection references or support
for clearing the data on disconnects, they had to be updated
as well.
The csip_notify.sh test has been disabled, as that expected a
notification in the client, but since this commit removes that
(until bonding is properly supported in the clients), then the
test will fail.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for sending long notifications, coming
from a long read, back to the application
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
The BIS_Sync bitfiled received over the air in Add Source and Modify
Source operations uses BIT(0) for BIS Index 1. Shift it when storing
it to match bis_sync bitfield where BIS Index 1 is at BIT(1).
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
Add check for the index in the function itself, as well as where
we call it internally, to ensure that we do not attempt to access
invalid indexes of broadcast_assistant.recv_state_handles.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
If starting the discovery procedure multiple times, the
subscribe function returns -EALREADY which needs to be handled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Verify that PAST would be possible before providing
BT_BAP_BASS_PA_REQ_SYNC_PAST as the PA sync value to the
Scan Delegator.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make the `pa_sync` field of the
bt_bap_broadcast_assistant_add_src_param and
bt_bap_broadcast_assistant_mod_src_param to boolean
instead of uint8_t, as it represents a boolean value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Rename the bt_audio_audio_server API to bt_bap_unicast_server
and move API to bap.h.
This also adds the _bap_ infix for bt_unicast_server.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When reporting a receive state to the upper layers, the broadcast
assistant should report NULL if there is not a receive state
active. The "activeness" of a receive state is determined by
the length of the characteristic - If it is 0 then there
is no receive state active.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The `bluetooth/common/log.h` and `bluetooth/common/log.c` files have been
removed. Files that were using them have been updated to use
`zephyr/logging/log.h` instead.
Those replacement have been done consequently:
- `/BT_DBG/LOG_DBG/`
- `/BT_ERR/LOG_ERR/`
- `/BT_WARN/LOG_WRN/`
- `/BT_INFO/LOG_INF/`
- `/BT_HEXDUMP_DBG/LOG_HEXDUMP_DBG/`
- `/BT_DBG_OBJ_ID/LOG_DBG_OBJ_ID/`
Also, some files were relying on the `common/log.h` include to include
`zephyr/bluetooth/hci.h`, in those cases the include of `hci.h` has
been added.
For files that were including `common/log.h` but not using any logs,
the include has been removed and not replaced.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Rename BASS to BAP Scan Delegator and BASS Client
to BAP Broadcast Assistant. This is the first step towards
integrating the BASS with the rest of BAP.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
2022-11-16 11:17:52 +01:00
Renamed from subsys/bluetooth/audio/bass_client.c (Browse further)
