A virtual metal_device is created and then the needed IO regions created
and added to this device. Immediately we extract these regions back out
and make use of them. There is no reason to do this, instead simply
use the created IO regions.
This also removes the need to have struct metal_device defined to have
more than one IO region (METAL_MAX_DEVICE_REGIONS), which is not default.
If the libmetal library was built with a different value, then updating
this header would not fix the underlying implementation leading to runtime
failures.
Signed-off-by: Andrew Davis <afd@ti.com>
We are always the remote client in this example. The shared pool is only
used for allocating ring descriptors when we are the host. Do not create
a shared pool with a NULL base address, simply do no pass in a pool.
Signed-off-by: Andrew Davis <afd@ti.com>
Currently a mix of printk() and LOG_*() are used, switch to using
the LOG functions in all cases. The code also has mixed line-ending
types, as the LOG functions add newlines remove these.
Also some messages that are failures are printed with debug log level,
use ERR level here.
Signed-off-by: Andrew Davis <afd@ti.com>
Check if creating the RPMSG endpoint fails and exit the task if so.
This prevents a later null pointer dereference if we try to continue.
Signed-off-by: Andrew Davis <afd@ti.com>
Be respectful of PAwR subevents while scheduling scan activities.
The radio will be swtiched from scan to PAwR when it is closed to
the next subevent interval.
Signed-off-by: Ryan Chu <ryan.chu@nordicsemi.no>
Create regulator on GPIO for microphone supply
Set pdm data and clk pins in pinctrl
Add xiao_ble_sense overlay for dmic sample support
Signed-off-by: Zak Portnoy <zakportnoy@gmail.com>
Enable DMIC on RW612 BGA board. The DMIC is enabled for both onboard
MEMS microphones for this board, and the board is enabled with the DMIC
sample and test
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
The gPTP is not suppose to be run on top of VLAN and the
earlier support was just for testing purposes. Remove VLAN
support now after the VLAN overhaul.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The VLAN interfaces are now Virtual type so we need to
collect only the Virtual interfaces and not Ethernet ones.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The thrift hello/client sample did not have the required
kconfig options for some reason.
Adding these seemed to fix the issue.
CONFIG_COMMON_LIBC_THRD=y
CONFIG_DYNAMIC_THREAD=y
CONFIG_THREAD_STACK_INFO=y
Signed-off-by: Chris Friedt <chrisfriedt@gmail.com>
The native_sim USB driver gives this error currently if one
enables CONFIG_POSIX_API.
drivers/usb/device/usb_dc_native_posix_adapt.c:22:10: \
fatal error: sys/un.h: No such file or directory
22 | #include <sys/un.h>
| ^~~~~~~~~~
compilation terminated.
Disable the netusb support from networking shells for native_sim
board for now so that CI can pass.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Changing remaining users of fcntl.h to use the include from our own
POSIX file so that the values in there are consistent in all parts
of the sources.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If enabling CONFIG_POSIX_API, we get three file descriptors open
before any socket descriptors. The sample exit criteria checks
socket 0 and 1 which is no longer a valid one, so change the
check to be either 0 or 3, and 1 or 4 so that the test can be
run in both when POSIX API is enabled or disabled.
Also disable color printing for the test run so that it is
easier to read the output log.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This fixes this error printed by CI:
Too many thread objects (21)
Increase CONFIG_MAX_THREAD_BYTES to 3
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Change the sample applications that use network socket API to
use the POSIX_API config because the NET_SOCKETS_POSIX_NAMES is
deprecated. Convert also the zsock_ API calls to plain BSD
socket API calls when applicable.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The sample wants to print the memory controller base address. However,
MEMC_BASE is used as argument in printf which is defined as long long
int. Use the memc pointer instead to print the base address.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The output example has not the correct indentation for the code-block
directive and therefore adds this output as normal text.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
During a memory mismatch, the sample only prints an error message.
Also print the read and write buffer to see the actual difference.
Moreover, add a print for each compare step to see the sample is still
running.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Adds missing sample.yaml file.
Update some sample.yaml to include build_only
Update some sample.yaml for device testing.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
MODEM_UBX: Adds Support for UBX Messages in Modem Subsystem.
GNSS API Supported: get_supported_systems, set_fix_rate, get_fix_rate,
set_enabled_systems, get_enabled_systems, set_navigation_mode,
get_navigation_mode.
Boards Tested: MIMXRT1062_FMURT6, VMU_RT1170.
Note: Partial support for U-BLOX Messages is provided as of now.
Signed-off-by: Sumit Batra <sumit.batra@nxp.com>
Signed-off-by: Mayank Mahajan <mayankmahajan.x@nxp.com>
The nrf5340bsim_nrf5340_cpuapp hwmv1 board name
was replaced with nrf5340bsim/nrf5340/cpuapp in hwmv2.
Let's fix it
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
USB initialization function mandates pointer to
callback. Seems this pointer was missed in hci_usb sample.
Commit fixes this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
arch_interface.h is for architecture and should not be
under sys/. So move it under include/zephyr/arch/.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
'native_sim' builds without any issues as part of twister and it also works
when manually setting up Ethernet virtual device (using
tools/net-tools/net-setup.sh).
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
'http_get' is one of the few samples that just require connection to
internet (google.com over HTTP or HTTPS) and check if HTTP GET was
successful. Use it for minimal coverage of Native Simulator offloaded
sockets:
* DNS resolving
* basic TCP transfer
* compatibility with Zephyr TLS subsystem (which required some fcntl()
operations)
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Simplify this sample's recently updated configuration, and ensure that
the file suffix feature works in sysbuild.
Signed-off-by: Grzegorz Swiderski <grzegorz.swiderski@nordicsemi.no>
regression.sh path is now tfm/api_ns/regression.sh, reflect it in the
doc.
Remove duplicate TF-M material.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Rather than providing flash partitions in samples, provide default
partition (no tests) as part of the board ns variant default configuration.
Update or remove related overlays.
Update ns variant yaml file to specify actual flash available for the
ns application (36K).
Additionaly, fix comment in b_u585i_iot02a_ns.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
