Make it depend on MBEDTLS_PSA_P256M_DRIVER_ENABLED instead of
selecting it.
This fixes the build of
tests/crypto/secp256r1/crypto.secp256r1.p256-m_raw on filtered-out
platforms since PR #75441 (83cd9f5a01).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Add more memory to dma region for cpurad as otherwise it fails
during initialization due to not enough memory for dmm heap.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
In case of minimal libc we have CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE = 0
by default. Some toolchains uses minimal libc by default (for example
ARC MWDT toolchain). Let's set CONFIG_COMMON_LIBC_MALLOC_ARENA_SIZE
explicitly so we can allocate memory for environment variables.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
It was pointed out in a future PR that they should have
a corresponding experimental Kconfig entry.
See PR #73795.
This updates the APIs added in PR #73826 and PR #74295.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
find_package() already deals with finding ZEPHYR_BASE, so do not rely on
it being set in ENV, use the variable directly adter find_package() was
called.
Fixes#75387
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These properties are not used by the driver at all, but are
inconveniently marked as required. Lets just remove them.
Signed-off-by: Brett Witherspoon <brett@witherspoon.engineering>
Profile names MBT and DFU are updated as MBTM and DFUM respectively,
according to TCRL 2024-1.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
This tests shows that there is a problematic buffer configuration.
The host locks up when `CONFIG_BT_BUF_ACL_RX_COUNT` is smaller or equal
to the number of connected peers, and all those peers send an L2CAP PDU
that needs re-assembly at the same time.
Although this seems far-fetched, this bug has been observed in a
real-life situation on actual hardware.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Following changes in HCI drivers
(https://github.com/zephyrproject-rtos/zephyr/pull/72323) the build for
the snippet allowing to have the Bluetooth shell run with BabbleSim was
broken.
Fix the snippet by disabling the HCI UART driver.
Add a twister test case that will build the snippet in CI to avoid
silent breaking.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Getting the required alignment size for memory region node
and device node needs to be handled by a separate macro.
Otherwise alignment of single byte is reported for any region.
Add a test that checks for this particular issue.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Rework configuration so that it does not require special treatment
in testcase.yaml.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Remove an overlay with a wrong name not being picked up,
and change the "A" revision overlay to be used by all revisions.
Also fix the "clocks" property in the overlay causing a fault with sai4.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
As found in PR #75525, we should not modify the polled fd array
in multiple places. Because of this fix, the async version of
the socket service could start to trigger while it is being handled
by the async handler. This basically means that the async version
cannot work as intended so remove its support.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The symtab test should have the
`CONFIG_EXCEPTION_STACK_TRACE_SYMTAB` enabled. This was not
caught in the CI previously as the regex was also wrong, '['
and ']' are regex syntax and should be escaped.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
There are instances where on hardware tests would result in
multiple dictionary logging blocks. This is usually due to
flashing and running via twister in separate steps. Once
flashing is done, the device starts running and sending
logging string to output, but twister is not ready to read
them, thus leaving the strings in the host's UART buffer.
Then twister starts its testing run by resetting the device
which results in another dictionary logging block to show
up. So the pytest script has to be updated to only look at
the last dictionay logging block.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Since only the UART backend supports output in hexidecimal form
with dictionary logging, so filter for that or else the pytest
would fail due to none, or wrong captured output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This commit changes the adc_api test to use the proper printf
format specifier when printing the ADC samplings. This ensures
that all values are printed on 16-bit. Without this specifier,
negative values are sign-extended and printed on full integer
size (e.g., 0x8000 -> "0xFFFF8000").
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
In order to support back-to-back readings, it's required that the
RTIO workq threads priority is higher than the caller issuing the
back-to-back requests, otherwise the requests will fail as P4WQ won't
have the opportunity to clear the is_done semaphore, and the subsequent
request will be rejected.
Signed-off-by: Luis Ubieda <luisf@croxel.com>
CONTINUATION frames are tricky, because individual header fields can be
split between HEADERS frame and CONTINUATION frame, or two CONTINUATION
frames. Therefore, some extra logic is needed when header parsing
returns -EAGAIN, as we may need to remove the CONTINUATION frame header
from the stream before proceeding with headers parsing.
This commit implements the above logic and additionally adds more checks
to detect when CONTINUATION frame is expected. Not receiving a
CONTINUATION frame when expect should be treated as a protocol error.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
For HTTP2-specific structures and enums, use "http2_" prefix to clearly
indicate the distinction from the generic HTTP stuff.
Additionally, some structures/enums describing HTTP2 protocol details
had "server" in the name, while in reality they describe nothing
server-specific. Hence, drop the "server" part where applicable.
Remove unused macros.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The rtc test suite uses timegm to convert a unix
timestamp to datetime, specifically struct tm which has no
nsec field, so the nsec field is not initialized properly.
Update tests to init nsec and isdst members of struct rtc_time.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Disable the pll2 when clearing the clock config prior to
testing the clock_control driver for the stm32h7
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Like in C test. If MAX STDDEV is lower than single clock cycle then
set it to a single clock cycle.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
If frequency of the system clock is lower then deviation may exceed
default value (10us). Instead of adjusting the default value, test is
rounding up expected standard deviation to a single clock cycle.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Add test to check that alignment and offsets of object array elements
are calculated correctly.
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
When NO_BACKENDS was not defined then log backends were
initialized (even though not used). During the initialization
filters for that backends were configured and because of that
messages were not filtered out as expected.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
Currently we get the build error when building
'tests/subsys/logging/log_backend_uart':
error: static_assert expression is not an integral constant expression
BUILD_ASSERT(strlen(TEST_DATA) < SAMPLE_DATA_SIZE);
~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
It can be easily workarounded by using sizeof instead of strlen
to calculate string size.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
In `tests/subsys/logging/dictionary` we don't include stdio.h
header but use standard stream definitions (i.e. `stdout`)
which cause build issues (if the minimal libc is used).
Fix that.
Signed-off-by: Evgeniy Paltsev <PaltsevEvgeniy@gmail.com>
Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Note CONFIG_PM_* affects device.h too. Even if not compiled, the more
code the pre-processor sees the better.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
This provides C++ build test coverage for device.h (notably:
Z_DEVICE_INIT() fixed in the previous commit) and for some other Device
Tree macros.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
With new BT SIG Qualification Workspace it is no longer possible to
export/import full project. Only ICS export/import is possible.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Fix build error due to cmake requiring a separate
overlay for each of this target's SOCs.
Error being fixed:
```
-- Board: sam_v71_xult, qualifiers: samv71q21
CMake Error at cmake/modules/extensions.cmake:2742 (message):
Board sam_v71_xult defines multiple SoCs.
Shortened file name (sam_v71_xult.overlay) not allowed, use
'<board>_<soc>.overlay' naming
```
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some AMP native simulator targets (like the nrf5340bsim net core)
will not produce a final executable if only one of the core images
is built, when IPC is enabled, as those images require the other
core image to be able to link.
So this test cannot be run when targetting that core alone
(without using sysbuild to build the other).
Let's filter out these targets to avoid twister building
but finding itself with no executable and error out badly
as it cannot run the test.
The filter condition is effectively:
If building for a native target, there must be an .exe being
produced.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The bug should be fixed now, so it possible to have it enabled as
long as OTS is not registered with the feature flag.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Some hardware takes longer to boot before any output is visible
from the app. So lengthen the initial timeout on waiting for
any output.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When doing device testing, there may be some other characters
being printed before the dictionary logging header string.
Also the delay boot banner may also be there. So change
the regex to ignore those them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
With sysbuild, the test app is actually built under another
layer of directory where the dictionary JSON file will reside.
Instead of simply using dut.device_config.build_dir, use
dut.devive_config.app_build_dir instead, which takes into
account of that.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This test verifies a convoluted interaction between the scanner and the
resumable advertiser feature in the host.
That feature is going away, see #72567.
Prepare that work by removing this test that's in the way.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
I am the original author of the test that is being removed. The test was
added in https://github.com/zephyrproject-rtos/zephyr/pull/70670 to try
to specify the behavior of automatic advertiser resuming in the Host.
It turns out now that the behavior of this feature depends on which
Controller is in use and can fail incorrectly.
The test assumes the DUT will be able to create `CONFIG_BT_MAX_CONN`
peripheral connections. But this is not necessarily true. E.g. Some
Controllers, like the SoftDevice Controller, may reserve some Host
connection slots for central roles, making the max number of peripheral
connections smaller.
In conclusion, the test is not correct and should be removed.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
This reverts commit 93973e2ead.
PR #73978 introduced a regression.
Unfortunately this PR cannot be reverted without reverting also
Let's revert both PRs to stabilize main again towards the 3.7 release.
For more details on the issue see
https://github.com/zephyrproject-rtos/zephyr/issues/75205
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
