Do not enable BT_HAS_PRESET_CONTROL_POINT_NOTIFIABLE as it
depends on EATT which isn't enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Make `bt_hci_cmd_send_sync` return `-EACCES` when receiving
`BT_HCI_ERR_CMD_DISALLOWED`.
Update some tests that were expecting `-EIO` when
getting `BT_HCI_ERR_CMD_DISALLOWED`.
Add a warning in `set_random_address` when getting that new error. This
is done in case someone try to set a new random address while legacy
advertising, scanning or initiating is enabled. This is illegal behavior
according to the Core Spec (see Vol 4, Part E 7.8.4).
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The `BT_DEBUG_*` Kconfig symbols have been deprecated for more than 2
versions, remove them.
Update code that was still using them.
Remove the Bluetooth specific `Kconfig.template.log_config_bt` and use
`Kconfig.template.log_config_inherit` from the logging subsystem
instead, now that the legacy symbols can be removed.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Add the CAP commander reception start procedure which starts reception
on one or more CAP acceptors
With the implementation of broadcast reception start procedure we also need
some mockups for unit testing
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
When calling bap_broadcast_assistant add_pa_sync, it should only
set the BIS index field as optional parameters and not to whatever
is in the BASE.
If setting BIS index which the BASE does not support, then the
command should be rejected.
This PR fixes https://github.com/zephyrproject-rtos/zephyr/issues/70835
Signed-off-by: Ping Wang <pinw@demant.com>
The commit adds support for LESC in the host if the controller
does not support the public key generation for ECDH.
Signed-off-by: Ping Wang <pinw@demant.com>
This implemnets OTS service and provides OTS instance with two objects
for behavior valid and invalid test cases. Service implementation is
inspired by peripheral_ots sample.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This commit updates models metadata API to simplify the usage and
removes the metadata pointer in health server model context.
Signed-off-by: Omkar Kulkarni <omkar.kulkarni@nordicsemi.no>
When in the BAP unicast server role, at least PAC sink
or PAC source shall be set.
In order to fulfill this new requirement, a few other Kconfig
options had to be changed to a `depends on` from `select` to
avoid recursive Kconfig requirements. This change may require
some applications to update their configurations according
to the migration guide.
The change from `select` to `depends on` is ideal anyhow
as that is the recommended way to add dependencies.
This can checked via the combined BT_PACS Kconfig value.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Delete tests that did not end up bringing any value.
What ended up happening is busy-work to "make the test pass" without
understanding what's their original purpose.
Worse, the CI change-based testing is broken and doesn't pick them up,
even by PRs modifying the tests themeselves.
See #68008
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
When building ISO applications on a device that has the host
and controller on the same core, the application developer
shouldn't have to set controller specific configurations.
Without this change the samples iso_receive and iso_broadcast
will fail to run on NRF52 series devices as the samples
try to set up two streams but the controller is configured
to support only one.
Controller unit tests that were previously only enabling the
controller specific ISO configurations now also enable the
top-level ISO configurations to ensure that the default
stream count is properly configured.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add USB out support for the BAP shell, so that decoded LC3
data can be sent to the host (e.g. a PC).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Commit adds using host\controller based random number
generator instead of zephyr driver.
No mesh dependency anymore on zephyr system
random driver.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
With the deprecation of `BT_LE_ADV_OPT_USE_NAME` and
`BT_LE_ADV_OPT_FORCE_NAME_IN_AD` the tester has been updated to not use
the macro adding the device name in the advertising/scan response data
anymore. Instead the name was explicitly added to the scan response
data. But because that part of the tester was using an extended
advertiser and was already adding data in the AD, the name should have
been put in the advertising data and not the scan response data.
The same issue apply to both `btp_cap.c` and `btp_bap_broadcast.c`,
update them to add the device name in the advertising data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Improve the default serial backend init level.
The documentation says to be bigger than the init level of the serial
device used. Since serial devices default to the kernel device init
level (50) then put this to default of application level drivers (90).
Signed-off-by: Joakim Andersson <joerchan@gmail.com>
To make it easier to understand the code, the following was done:
- Use INITIATING/ADV for state names that are exclusive to central
or peripheral. Previously it was not necessarily clear that the state
BT_CONN_CONNECTING was for central only by just looking at where
it was used. The terms INITIATING/ADV were used in favor
of central and peripheral as these terms also work for SCO connection
establishment.
- BT_CONN_CONNECTING_SCAN -> BT_CONN_SCAN_BEFORE_INITIATING
to make it more clear that we are not scanning and connecting at
the same time. The new name should make it more clear why we are
scanning - only with the intention to start the initiator later.
- BT_CONN_CONNECTING_AUTO -> BT_CONN_INITIATING_FILTER_LIST.
This makes it clear that this state is something different than
BT_CONN_AUTO_CONNECT.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
The advertiser options to automatically add the name in the scan
response and the advertising data will be deprecated.
Update the tests that were relying on those options. A lot of test were
actually not using the name, for those the name have simply been
removed. For the others that were using the name, add it in the
advertising data or the scan response data.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This is useful if we want to paste a list of multiple command or add
long advertising data for example.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
The configuration file is mostly tested for the nRF53 series
where the controller configuration is usually from the
hci_ipc sample.
This means that the existing audio.conf before this commit
has not really been tested for audio, and were missing a few
configurations to make it work properly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Generic node_rx_hdr struct contains data not used for done event, so this
pdu specific data is moved to node_rx_pdu to minimize memory usage for
MFIFO_done alloc.
This however calls for a considerable write-through replacing the generic
node_rx_hdr with node_rx_pdu when relevant and needed.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
If central initiates incompatible procedure after having replied (with
_IND), peripheral fails to disconnect as spec'ed.
Fix by correctly setting the INCOMPAT flag to reserved on IND receipt to
enforce the disconnect.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The commit adds dependency on Kconfig FLASH_PAGE_LAYOUT to subsystems
that really require it:
FCB, NVS, LittleFS
and removes direct selection from '*.conf' files where no longer
needed.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
EATT is not properly used by LE audio nor is the
Zephyr implementation very good, so disable for now
or at least until the BSIM tests are passing with it
enabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the supported receive state count to 4, as
several on-market device have at least 2 and sometimes
more.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Set CONFIG_BT_MAX_PAIRED with same value as in host.
This is needed for CSIP tests with three lower testers:
CSIP/CL/SP/BV-07-C, CSIP/CL/SP/BV-03-C, CSIP/CL/SP/BV-04-C,
CSIP/CL/SPE/BI-01-C
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
This commit adds CSIS command to change type of SIRK.
This is needed for CSIS/SR/SP/BV-05-C test case.
Signed-off-by: Piotr Narajowski <piotr.narajowski@codecoup.pl>
The unittest for cap commander is refactored, so that tests
for volumecontrol is in its own module.
This avoids the problem of having all tests in one huge file.
Due to their small size the tests for registering callbacks and
discovery haven't been put into their own module.
Signed-off-by: Andries Kruithof <andries.kruithof@nordicsemi.no>
This function waits for a free connection slot. It should be used to
slow down a busy loop trying to obtains a connection slot.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Mesh v1.1, DFU v1.0 and MBT v1.0 are supported by default in the stack.
In this regard, this commit updates the ICS file and Launch Studio
Project file to reflect supported features.
Signed-off-by: Alperen Şener <alperen.sener@nordicsemi.no>
Changes to logging:
- Don't log "Connected" if there was an error.
- Identify the relevant bt_conn object in log messages by its index.
- Special case non-fatal errors:
- Failure due to out of free conn object is INF.
- Improve transparancy of error messages:
- For errno, include the name of the API.
- For HCI errors, include the common prefix of the symbols
'BT_HCI_ERR_' so they are easier to look up.
This change includes some light refactoring to make the code more
understandable, but does not change any behavior.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
For the 64 bit targets, change identifiers to the new hwmv2 ones.
And remove redundant overlays (which were equal for the 32
and 64 bit versions)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix CIS accepted by Host being failed in the Controller with
reason 0x20 Unsupported LL Parameter Value, by relaxing the
check that the ACL connection is sufficiently placed such
that the time reservation using in the Controller
implementation does not overlap with the CIG event.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add new commands to manage the Encrypted Advertising Data feature.
Overview of those new commands:
- `bt encrypted-ad set-keys`: set key materials (session key and
initialisation vector) used for encrypted and decryption of EAD;
- `bt encrypted-ad add-ad`: store a given advertising data structure;
- `bt encrypted-ad add-ead`: encrypt the given advertising data
structres and store the generated AD structure;
- `bt encrypted-ad commit-ad`: set the AD of the selected advertiser
with the stored AD;
- `bt encrypted-ad clear-ad`: remove all stored AD;
- `bt encrypted-ad decrypt-scan`: decrypt data using the previously set
key materials when receiving AD with type `0x31`.
The documentation of the Bluetooth Shell has been updated to include
those new commands.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Spawns n instances of the bt-shell in separate xterm windows.
Assumes in-tree build of the shell, can optionally specify another .exe
image.
Also add snippet for that use-case (`-S xterm-native-shell`).
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Some pieces of code were missing proper guards for Kconfig
values, which could cause compile issues
The massive amount of #if in bap.c clearly indicates that the
file should be split, as it contains many things that are specific
for various roles.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add support for vendor specific Set Scan Request Reports command and
Scan Request Received Event, available for legacy advertising.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
