Make sure DEBUG is enabled if this test is run in CI.
Also re-instantiate CONFIG_PM=y which was abusively removed in a previous
change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
During testing I've found one bad path and looked if
there is more.
I've used this oneliner to find more:
```
rg :zephyr-app: | awk '{ print $3 }' | while read dir
do
test -d $dir || echo $dir
done | grep '^samples' | grep -v '<' | sort | uniq
```
Signed-off-by: Nerijus Bendžiūnas <nerijus.bendziunas@gmail.com>
- Add integration_platforms to avoid excessive filtering
- Make sure integration platforms are actually part of the filter
- Fix some tags and test meta data
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Twister now supports using YAML lists for all fields that were written
as space-separated lists. Used twister_to_list.py script. Some artifacts
on string length are due to how ruamel dumps content.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
configure the nucleo_wb55rg with a prescaler on the LPTIMer input
clock to increase the max sleep duration.
With 32 the input clock is 1024Hz and max reachable timeout is
64 seconds.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
use hwinfo_get_reset_cause() instead of LL_PWR_IsActiveFlag_SB()
remove LL_PWR_ClearFlag_WU() not mandatory
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
This applies the coccinelle script to another set of files:
samples/bluetooth/bthome_sensor_template/src/main.c
samples/boards/stm32/power_mgmt/standby_shutdown/src/main.c
samples/drivers/smbus/src/main.c
samples/drivers/virtualization/ivshmem/doorbell/src/ivshmem.c
samples/fuel_gauge/max17048/src/main.c
samples/hello_world/src/main.c
samples/sensor/proximity_polling/src/main.c
samples/subsys/logging/ble_backend/src/main.c
tests/drivers/build_all/mfd/src/main.c
Signed-off-by: Keith Packard <keithp@keithp.com>
As both C and C++ standards require applications running under an OS to
return 'int', adapt that for Zephyr to align with those standard. This also
eliminates errors when building with clang when not using -ffreestanding,
and reduces the need for compiler flags to silence warnings for both clang
and gcc.
Most of these changes were automated using coccinelle with the following
script:
@@
@@
- void
+ int
main(...) {
...
- return;
+ return 0;
...
}
Approximately 40 files had to be edited by hand as coccinelle was unable to
fix them.
Signed-off-by: Keith Packard <keithp@keithp.com>
use hwinfo_get_reset_cause() instead of LL_PWR_IsActiveFlag_SB()
remove LL_PWR_ClearFlag_WU() not mandatory
Signed-off-by: Marc Desvaux <marc.desvaux-ext@st.com>
This overlay shows the LPUART at 9600 with wakeUp capability
to exit the nucleo_wl55jc target plaform from the low Power
stop mode, EXTI_Line 28 is the corresponding wakeUp source.
The LPUART is sourced by the LSE (32768Hz) and max baudrate
is 9600. Set the console to 9600.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
On STM32 PM serial wakeup sample, a power efficient configuration using
lpuart is provided for stm32l562e_dk target.
Though, since default configuration of the board is using ST-Link virtual
port com on uart1, which can't be changed in CI and hence can't be tested,
then remove this target from sample yaml configuration.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Since the change in the PR #49167
samples: boards: stm32: serial_wakeup: fix device usage issues
the sample should not check the "Device ready" anymore
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This commit retrains the power management testcase
tests/samples/boards/stm32/power_mgmt/serial_wakeup
to bun on stm32 boards only.
Limiting first to nucleo_wg55 and stm32l562dk targets,
more to be added.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Device ready check was wrong (< 0 ?!), so fix it. Also drop static
qualifier for the device variable (not needed) and initialize at
definition time.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add a sample to demonstrate use of (LP)U(S)ART with wakeup capability
This sample is provided with 2 configurations
- nucleo_wb55rg: Basic configuration that could be exercised in CI
- stm32l562e_dk: "Full feature" configuration that require some set up
configuration (be able to display console from lpuart) and allows to
achieve lowest power consumption.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In order to bring consistency in-tree, migrate all samples to the use
the new prefix <zephyr/...>. Note that the conversion has been scripted:
```python
from pathlib import Path
import re
EXTENSIONS = ("c", "h", "cpp", "rst")
for p in Path(".").glob("samples/**/*"):
if not p.is_file() or p.suffix and p.suffix[1:] not in EXTENSIONS:
continue
content = ""
with open(p) as f:
for line in f:
m = re.match(r"^(.*)#include <(.*)>(.*)$", line)
if (m and
not m.group(2).startswith("zephyr/") and
(Path(".") / "include" / "zephyr" / m.group(2)).exists()):
content += (
m.group(1) +
"#include <zephyr/" + m.group(2) +">" +
m.group(3) + "\n"
)
else:
content += line
with open(p, "w") as f:
f.write(content)
```
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Kconfig options now belong to the Kconfig domain, therefore, the
:kconfig:option: role needs to be used.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Remove this line because the pm_device_busy_set function will
prevent the system to enter low power.
This sample application wants to.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Change pm_power_state_force to receive which cpu the state should be
forced. Also, it changed the API behavior to force the given state only
when the idle thread for that core is executed.
In a multicore environment force arbitrarily a core to suspend is not
safe because the kernel cannot infer what that cpu is running and how it
impacts the overall system, for example, if it is holding a lock that is
required by a thread that is running in another cpu.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Fixes: #38403
Removing unneeded `imply GPIO` and `CONFIG_GPIO=y` occurrences where no
files are added to the gpio zephyr library.
Also removed `CONFIG_GPIO=y` occurences where this is handled by
defconfigs for the soc or board.
Selection of GPIO without selecting any drivers results in the warning:
> No SOURCES given to Zephyr library: drivers__gpio
>
> Excluding target from build.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Enable CONFIG_DEBUG when test is run in CI.
This will allow DGB access in stop modes (and specially flashing)
and avoid potential issues when test in run in a test suite.
Note that on some targets (stm32wb for instance) openocd is able
to do the same operation, and which allows to reflash the target
even if switch was not enabled, but this could not be the case
on all targets.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move to CMake 3.20.0.
At the Toolchain WG it was decided to move to CMake 3.20.0.
The main reason for increasing CMake version is better toolchain
support.
Better toolchain support is added in the following CMake versions:
- armclang, CMake 3.15
- Intel oneAPI, CMake 3.20
- IAR, CMake 3.15 and 3.20
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
The following device busy APIs:
- device_busy_set()
- device_busy_clear()
- device_busy_check()
- device_any_busy_check()
were used for device PM, so they have been moved to the pm subsystem.
This means they are now prefixed with `pm_` and are defined in
`pm/device.h`.
If device PM is not enabled dummy functions are now provided that do
nothing or return `-ENOSYS`, meaning that the functionality is not
available.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Add minimum harness and to get the sample passed when run using
twister.
Adding console validates uart init with DEVICE_RUTIME=y.
Additionally, clarify comment about DEBUG activation.
Fixes#35033
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This sample turn on/off the LED every two seconds and then sleeps. When
the LED is on we don't want the system putting it down when goes to
sleep. So, just setting this device as busy.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Restrict sample execution in CI to boards that have
"st,stm32-lptim" enabled so we're sure it is a STM32 target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
