Make sure that the socket service is properly unregistered when
dispatcher is unregistered.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a separate test for public key validity. This needs to be done
synchronously so that we can respond with an early failure message to the
peer device.
Fixes#80218
Signed-off-by: Johan Hedberg <johan.hedberg@silabs.com>
If a shell command does not have a sub command, then the 3rd parameter
to SHELL_SUBCMD_ADD() macro should be set to NULL so that the help
will only print information specific to that command and not all
wifi commands.
Fixes#82633
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a separate entry for HTTP related code so that we can have
separate maintainers/collaborators than general networking area.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The tests overflowed system workqueue stack slightly when running on
nRF52840, increase the stack size globally for the tests to avoid
potential issues on other platforms as well.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
When calling wifi_ap_disable() API specific WiFi driver implementation was
checked whether 'ap_enable' was provided, instead of 'ap_disable'. Fix
that copy-paste error.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Testcase uses certificates from the sample application at
samples/net/sockets/http_server. These were modified and moved into a
different folder by a previous commit, causing a build failure in the
test.
Testcase updated to:
- use new path to certificates
- update available cipher suites, since certificates now use ECDSA
- update expected hostname in certificate
The CA certificate in the sample app is also converted to .der format
for inclusion in the test (the content is exactly the same as the PEM
version, just converted to DER).
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
[Description]
PTS case: VCS/SR/SGGIT/CHA/BV-03-C fail.
[Root Cause]
VCS/SR/SGGIT/CHA/BV-03-C require Volume Flags Characteristic properties
(Read/Notify), but tester volume flags notify is disabled by default.
[Fix]
add CONFIG_BT_VCP_VOL_REND_VOL_FLAGS_NOTIFIABLE=y in
tests/bluetooth/tester/overlay-le-audio.conf
[Testing]
After modified, VCS/SR/SGGIT/CHA/BV-03-C pass with log:
Test Case Ended VCS/SR/SGGIT/CHA/BV-03-C PASS 24 00:00:01.010000
12/9/2024 11:31:55.027000 AM
Signed-off-by: Chang An <chang.an_1@nxp.com>
Configure the TE signal for the rw_rw612_bga board when using the
lcd_par_s035 shield. This signal should be handled on the rising edge in
the default configuration, since the display writes from the MCU are
faster than the panel reads data.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Use the mipi_dbi_configure_te API within the st7796s display driver.
If the MIPI DBI controller supports the tearing enable signal, then
configure the ST7796S to output the TE line signal.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Add support for the mipi_dbi_configure_te API within the NXP LCDIC
peripheral. Also, remove a redundant code patch in the write_command
function that was previously used to determine when the display driver
was writing to graphics RAM, as these writes should now be performed
using the mipi_dbi_write_display API.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Many MIPI DBI displays support a "tearing effect" signal, which can be
configured to signal each v-sync or h-sync interval. This signal can be
used by the MIPI DBI controller to synchronize writes with the
controller, and avoid tearing effects on the screen (which occur when
the write pointer from the MCU overlaps with the panel's read pointer in
the display controller's graphics RAM).
Add the `mipi_dbi_configure_te` API, which allows display controllers to
configure MIPI DBI controller to wait for a TE edge before streaming
display data. Allow the tearing enable parameters to be configured via
devicetree settings, since these will vary based on the MIPI DBI
controller and display controller in use.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
Rename "nxp,kinetis-lpuart" compatible to "nxp,lpuart" to remove the
device family from its name.
Signed-off-by: Manuel Argüelles <manuel.arguelles@nxp.com>
This board has the required clock crystal (X4) and jumper settings
present to enable the USB 2.0 HS support.
* Enable the HSE clock (16MHz)
* Flip the PLL1 configuration over to use the HSE clock, but still
outputting 160MHz to sysclk/apbclk.
* Add the USB HS device tree node.
* Update the board documentation.
Signed-off-by: Adrian Chadd <adrian.chadd@meta.com>
Introduce new binding "st,stm32u5-otghs-phy" for OTG_HS PHY. This allows to
configure clock source and handle STM32U5 specific OTG_HS PHY behavior in
driver implementation in a more readable way.
Move OTG_HS PHY clock selection (previously <&rcc STM32_SRC_HSI48
ICKLK_SEL(0)>) from OTG_HS node to OTG_HS PHY node.
Rename USBPHYC_SEL -> OTGHS_SEL which matches the definition in the stm32u5
CCIPR2 register (RM0456 Rev 5, Section 11.8.47).
Support enabling OTG_HS PHY clock, which is bit 15 (OTGHSPHYEN) in
RCC_AHB2ENR1. Change OTG_HS clock to be bit 14 (OTGEN).
Calculate in runtime OTG_HS PHY clock source frequency. Try to match that
to supported (16, 19.2, 20, 24, 26, 32 MHz) frequencies and select proper
option with HAL_SYSCFG_SetOTGPHYReferenceClockSelection() API (instead of
hardcoded 16 MHz selection).
Co-authored-by: Adrian Chadd <adrian.chadd@meta.com>
Signed-off-by: Adrian Chadd <adrian.chadd@meta.com>
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
Support specifying divided clock buses by introduction of
STM32_CLOCK_DIV(div) macro. This macro can be used in devicetree to define
clock source of peripherals.
HSE is selected in devicetree using:
<&rcc STM32_SRC_HSE ...>;
HSE/2 can now be selected with:
<&rcc (STM32_SRC_HSE | STM32_CLOCK_DIV(2)) ...>;
This allows to use clock_control_get_rate() API in peripherals in order to
get desired clock rate.
Signed-off-by: Marcin Niestroj <m.niestroj@emb.dev>
in the switch case in the preceeding for loop if default path is taken
all the time, then the ret variable will stay uninitialized, the original
contributor of this driver has provided a comment that this path shall
never be reached, however, it is better to return an error code instead
of continuing with an incorrect configuration, hence this commit replaces
continue with a proper return errno.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Re-ran `clang-format` for consistent styling, simplified
multi-line statements, and consolidated string concatenations
where applicable.
This is a non-functional change focused on code formatting.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Catch the DTS warning by copying the SDRAM node in description:
unit address and first address in 'reg' (0xc000000) don't match for
/sdram@c0000000
Signed-off-by: Haiyue Wang <haiyuewa@163.com>
Added shell_device_get_binding() that wraps device_get_binding() plus
device_get_by_dt_nodelabel() so that a shell can easily get a device by
its full name or label.
Signed-off-by: Yishai Jaffe <yishai1999@gmail.com>
for the brevity renaming direction_gpios to dir_gpios since STEP/DIR
interface is quite an established term in context of stepper controllers.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
The current implementation of tmc2209 driver does not allow instantiation
of the driver without configuring msx pins.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
The SD physical layer specification requires that the operating supply
be stable for at least 1 millisecond before providing the required 74
clocks. The maximum VDD ramp time is specified at 35ms, giving a total
minimum delay of 36ms.
Signed-off-by: Jordan Yates <jordan@embeint.com>
MONOLITHIC_NXP_NBU cannot be used in CI as it relies on firmware blobs
to be fetched.
Disabling the feature so the CI can pass.
Also tagging this test as build_only.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
This PR fixes a blocking call to video_buffer_alloc in case of memory
shortage by addign a timeout parameter to the API.
Signed-off-by: Armin Kessler <ake@espros.com>
There is no reason the syscall tests should not be perfomed on
relocatable builds. This made some test runs pass even though
issues were present in those configurations.
Remove the build gate.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
The weak syscall symbols generated by gen_syscalls.py are currently
compiled in the LLEXT subsystem library, which is then linked among all
other Zephyr libraries in an unspecified order. This can cause the weak
symbols to override the actual syscall implementations, leading to
undefined behaviour.
To fix this, the currently generated file is split in two elements:
- syscall_exports_llext.c contains the EXPORT_SYMBOL directives for all
syscalls. This part can be compiled with the LLEXT library and linked
among all other Zephyr libraries, and ensures all syscalls symbols
are preserved by the linker.
- syscall_weakdefs_llext.c contains the weak definitions for all syscalls.
This file is compiled in a separate library that is linked last, so
that the weak symbols are only used if no other implementation is
available.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
In current implementation, the SDP response packet will be ignored if
the operation code is `BT_SDP_ERROR_RSP`. And the SDP transaction
request is done, but the application is not notified. And the pending
SDP transaction cannot be processed.
Notify application with empty buffer if the operation code is
`BT_SDP_ERROR_RSP`. And process the pending SDP transaction.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The discovered SDP record of service attribute transaction response
cannot notified correctly. There is an error returned from function
`get_record_len()`.
For service attribute transaction response, only one attribute list
is returned. So the total record length is the buffer length. Return
buffer length directly from `get_record_len()` to fix the issue.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
This commit replaces the assignment of IS_ENABLED(x) macros to
various variables with direct condition checking. This should fix the
coverity issue and also promotes more uniformity in code.
Signed-off-by: Jilay Pandya <jilay.pandya@outlook.com>
Logging with STMESP frontend is using custom logging header feature.
Put that specific header file in a custom path which is added to the
build only if that logging frontend is used.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
MONOLITHIC_NXP_NBU cannot be used in CI as it relies on firmware blobs
to be fetched.
Disabling the feature so the CI can pass.
Also tagging this test as build_only.
Signed-off-by: Axel Le Bourhis <axel.lebourhis@nxp.com>
Using HTTP/2 to communicate with the sample application using a web
browser requires some additional steps. Add documentation describing
this to the sample README file.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
Add application level Kconfig option to enable ALPN usage for
negotiating HTTP/2 connection with web browsers.
Signed-off-by: Matt Rodgers <mrodgers@witekio.com>
