Instead of using hard coded net_if, get the default network
interface using net_if_get_default() function.
Change-Id: I6248555ce57ae5196adea7baa9db325660a71255
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These two boards don't have enough RAM to effectively run this
test case without making the stacks so small they don't work
on other platforms. ARM is sill covered by other boards.
Change-Id: Ibf20eefaf29f989cbb6da6cd3a8eeed2faa1950b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Right now there are tests for IP packet checksum calculation.
Change-Id: I1e9e72d01d4690728269c4484f8628350cf95729
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
These tests will check that caller is able to set IPv4 address
to a network interface and check if an address is one of the
assigned to a network interface.
Change-Id: I8aa748c40fbc02eef50ccf76d10a0057ef29021b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Tests have issues right now so these will be activated later.
Change-Id: Ib5549f9ed5600a20b2cfddbddcde8e7f7b297eef
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User should use the net_nbuf API that is supporting a concept
of RX, TX and DATA buffers, instead of using directly the net_buf
low level API.
Change-Id: I3b8f5f13cd37d42d2322a58b35573e117d520c54
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
More realistic IPv6 packet creation tests created.
One test creates one big IPv6 packet and manipulates that.
Second test creates a list of IPv6 header + data fragments
and sets some user data in those fragment buffers.
Change-Id: Ic8309ff115e1d735e98c30b3c8292b0d6ffc5f42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add tests for checking that the net_buf fragmentation works ok.
Change-Id: I778f79bae971314b6f19c1bf00ed42e1c2128e99
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Allan fixed the underlying issue, re-enable.
This reverts commit 19fa82ab91.
Change-Id: I6e517f76a6650a3e9ba5a09118187e6c965a147a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The test test_thread_monitor fails when a platform enables
the IPC console.
This commit fixes the test to count the IPC console fiber
if it is enabled in the project or the platform.
Change-Id: I9faf9d120b35d9211e558be8f5788885f30c3081
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
We now allow use of -mgpopt=global and -mgpopt=data. The 'global'
option is now the default instead of compiler-default local, expanding
global pointer usage to all small data in the system.
For systems where all RAM is less than 64K, the 'data' option may be
appropriate.
Some fixes had to be made to the system in order to get around some
issues:
* prep_c.c no longer uses fake linker variables to figure out the size
of data or BSS, as these gave the linker fits as it tried to compute
relative addresses to them.
* _k_task_ptr_idle is create by sysgen and placed in a special section.
Any small data in a special section needs to be declared extern
with __attribute__((section)) else the compiler will assume it's in
.sdata.
* same situation with extern references to k_pipe_t (fixed pipe_priv
test)
For legacy applications being ported to Nios II which do things that
freak out global pointer calculation, it can be disabled entirely.
Change-Id: I5eb86ee8aefb8e2fac49c5cdd104ee19cea23f6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the FP sharing test project for use with the Cortex-M4.
Change-Id: If04a191b26291058bd7002ce8a0939eda8a5eb48
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Clean up test code in preparation for adding Cortex-M4 support.
Change-Id: I64a32e8aa2808b4e0348601e2fc0f7f39cdb413c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Buffers pool has to be increased for all configurations.
Change-Id: Id24caced5043c1672ca5f753d1e86d9a72c728ea
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
TP/GAW/SR/BV-10-C test case requires two long values to perform
nested prepare write operation. Using one ATT Execute Write command
this two values are going to be written simultaneously.
Change-Id: I2950409ed8f1d121dcc706b432cdf071b9af00c0
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Tagged some tests/kernel testcases with 'bat_commit'. Only test that
work on actual hardware are tagged, while tests with known issues
were left not tagged, test meant for emulator or build only were
also not tagged.
Change-Id: Icede6bc76788aba60d8f1fdcf624e95a7d3116a2
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
No compiler support for -fstack-protector on this arch with the
current toolchain.
Change-Id: Ifa793599b6760c318f16748f9e71c31e0d4edbe7
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Tickless idle will not be enabled on Nios II due to the
lack of a powersaving instruction.
Change-Id: Ib3c23d803d6335aeb791983e31ad7da2d0deb118
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver does not yet support interrupt-driven console.
Revert when ZEP-280 is implemented.
Change-Id: Ib430c39138194ab441c95a1b1856c3661102a625
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
printk() is too simplistic and does not handle byte precision on formats
like %02x etc... printf does, so letting the possibility to use it when
relevant. This might be useful when dumping out some network packets,
byte by byte where a precision of 1 byte (thus 2 0's) is necessary.
It's better to have this output:
41 d8 ...
instead of:
00000041 000000d8 ...
Change-Id: Idc15bbae67830f41388373e2ca1947bb274fb550
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
A recent change modified the fiber stack size of these tests
to 256 bytes, which causes a stack overflow on Nios II. (This
arch has lots of registers)
Increase to 384 bytes, which still compiles well on RAM-constrained
targets like Quark SE SS, Nucleo, etc.
Change-Id: I2152ea9fc1fac693638b8f7a00a6b6628e0c42d3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is used in many other test cases. However when implementing this
function it's helpful to have a testcase dedicated for it, without
dependencies on other kernel objects.
Change-Id: I66a7cdd0b13712665384d5ad4e79050c82d32e3a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Not all CPUs implemement the mul, div, or mulx instructions. Ensure
that any runtime handling of these works correctly.
Change-Id: I50426bd5704cd913f290c9677d1760d53c9e4b56
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BT_GATT_INCLUDE_SERVICE user_data shall point to the service declaration
of service to be included. So user_data_len shall be set to 0 to avoid
copying the contents of bt_gatt_attr to the server_buf, and just use
pointer to the actual attribute.
Change-Id: Id770daeb6d64644c51f2bc5d3962dd80363ec8c3
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Add HRS simulation to shell allowing to switch on / off HRS simulation
helping testing GATT notifications.
Change-Id: Idf99b74ac73d45d2f0d3279d50431be4027fef8a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
attr pointer is local here, so it may be overwritten anytime, because
this attribute user_data will be used out of scobe of this function.
Change-Id: I85b390299980dac213d8ce1939078fe8b242c887
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Adds to BR/EDR L2CAP client channel object required handlers and allocate
room for channel data traffic to make it operational when fully
setup and to be interactive with internal stack.
Change-Id: Id1e90d7ea318ed8a875383995e4d175e124939eb
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Interrupt-driving UART not implemented yet for this driver.
Change-Id: Ida60d7e09e9eca2d7e6452a84f6d95529d0af9b6
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes wrong server instance used during printing details on registration
PSM server.
Change-Id: I269d20bf4d12f24ce143a04c1c23ed8711b9cdba
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
There is no need for any prepare write variables as this is now handled
transparently by the stack and so any errors that happens during write
shall be reported in the return.
Change-Id: I3e629016cb7f5f6cd9106ff07c3cbb464e81734f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The parameter is already inside a struct that's specific to BR/EDR
discovery, so there's no need to repeat "discovery" in its name.
Change-Id: Idb95788bfc9d62ecd52adecc35104e212724cb78
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since we only have a single user we can enforce length > 0x01. We
should also ensure that the results count is 1-255.
Change-Id: Id5d91acae06c6c6fc66dd59c0e367682a98dc08c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a sample static testcase (so it needs no target machine) to
run checkpatch as a testcase and produce output only if it fails.
Change-Id: I055c0125ac785058e101faa68eb5aaff9f7caf16
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is a sample static testcase (that needs no hardware target) that
will build the documentation and ensure it builds without issues.
Change-Id: I7174205522be9aead350e67b1672b8e976cb9191
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
For automation to detect this is the right test case being executed,
print the RUNID if defined
This TC doesn't use TC_*() macros, so we need to invoke it manually.
Change-Id: I6f7417621d649a59412bb92d8b665130757d926a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This is a helper to print a token passed form the compilation
environment.
Further documentation and rationale in the code.
Change-Id: I8d5e6b2246ba5c4f09b78532b3c600891f94bb63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Refactors L2CAP core data structures and modifies functions that uses them.
Now we can have separate L2CAP feature channel objects for LE and BR/EDR
transport. This's also a ground for make L2CAP CoC API to be common
for both transports.
Change-Id: Ic1197b0e3c4f505764b23fb9c7eb27123a44a675
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
