Use the common scripts to perform common functions
and do a cleanup.
Do not set variables to their defaults, set things
closer to were they are needed;
Do not perform unnecesary checks;
And in general avoid unnecessary complexity.
Some of the _compile scripts were rotten => Fix them.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Ensure we call the common source script before using
the BOARD variable;
Use the common scripts to perform common functions
and do a cleanup.
Do not set variables to their defaults, set things
closer to were they are needed;
Do not perform unnecesary checks;
And in general avoid unnecessary complexity.
And for the 2 parts of the peripheral rpa sharing
test, use different sim_ids, so the traces for each
part can be checked.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Ensure we call the common source script before using
the BOARD variable;
Use the common scripts to perform common functions
and do a cleanup.
Do not set variables to their defaults, set things
closer to were they are needed;
Do not perform unnecesary checks;
And in general avoid unnecessary complexity.
And return !=0 on error.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the common scripts to perform common functions
and do a cleanup.
Do not set variables to their defaults, set things
closer to were they are needed;
Do not perform unnecesary checks;
And in general avoid unnecessary complexity.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Ensure we call the common source script before using
the BOARD variable, and let's not set things
which are already set to the same by default
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Use the common scripts so we have a consitent way of
running the tests, report failures in the same way,
can stop them with ctrl+C, properly wait for
all processes to exit..
Let's also place the test scripts in the test_scripts/
folder as it is convention.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
(f) ests/bsim bt att: Use common s
Ensure we call the common source script before using
the BOARD variable;
Use the common scripts to perform common functions
and do a cleanup.
Do not set variables to their defaults, set things
closer to were they are needed;
Do not perform unnecesary checks;
And in general avoid unnecessary complexity.
Also, remove all timeouts which were unnecessarily too short
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Some developers want to programmatically get the
test name instead of hardcoding it.
So let's have a common function for this.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
As now, with hwmv2, boards can have "/" in their name,
and the board name is not anymore the complete target
name, let's set a new variable with the
whole board target name, but converted into the format
which can be used in paths.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test was way too verbose (produced a log over 65000 lines
long).
Let's mute it a bit. If the test fails, developers
can raise the log level as needed.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test is an attempt at formalizing at least part of the behavior
described in commit 6a79c3deae.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
After https://github.com/zephyrproject-rtos/zephyr/pull/70438
got merged simultaneously with
https://github.com/zephyrproject-rtos/zephyr/pull/70564
all these tests stopped building properly due to the
change of avaliable variables in Kconfig & cmake.
Let's fix them.
As a bonus, as for kconfig the BOARD_TARGET_STRING is the
same for the hwmv1 backwards compatible name, let's
just remove the check for the old names.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The PBP bsim tests had several issues that was not uncovered
until the PA sync timeout was increased. This commit fixes these,
as well as increase some timeout values due to recently
increased PA sync timeout.
Among the issues were lack of support for the alternating PBA
features, missing reset of values and specific time sleeps.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace all instances of
nrf5340bsim_nrf5340_cpunet & nrf5340bsim_nrf5340_cpuapp
with
nrf5340bsim/nrf5340/cpunet & nrf5340bsim/nrf5340/cpuapp
In these samples/tests twister yamls definitions.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
For all samples which handle the nrf5340bsim in some special way
(for example in sysbuild files, or by checking what samples are
supported) handle also building with the hwmv2 names.
Also, let's fix the cmake info message in these respective
samples which tells the user which board target is used for which
part of the app.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This deduplicates a copy of testlib from before testlib was a globally
available cmake library.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
rpa expired bsim is refactored so that every rpa rotation, one of
the adv set belong to an adv_id returns false based on adv_index.
In turn all adv sets under the same adv_Id continues with old rpa.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
This test was way too verbose (produced a log over 65000 lines
long).
Let's mute it a bit. If the test fails, developers
can raise the log level as needed.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in the new runners
due to a (realtime) timeout.
Let's double the timeout so it does not.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
GATT/SR/GAS/BV-01-C has just broken due to what appears
like a minor timing change.
This indicates the test may be too time sensitive.
Just reordering the tests, it passes again.
So let's reorder the test list, and we get the minor
benefit of havign them move alphabetically ordered.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
It is often desired to maximize the chances of receiving advertising
when scanning. To achieve this, the scanner should be enabled all the time.
Some controller implementations (like Nordic's SoftDevice Controller)
handle scheduling differently when scan_window = scan_interval.
Having a macro that defines this scanning configuration simplifies
writing applications.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
One of these tests has been seen failing in older slower
computers due to timeouts, let's increase the timeout so
we don't break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in older slower computers
due to timeouts, let's increase the timeout so we don't
break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
This test has been seen failing in older slower computers
due to timeouts, let's increase the timeout so we don't
break in those cases.
Note this timeout is just a safety to eventually kill
hung simulations even if nobody presses Ctrl+C.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The fix is to check if any of the adv set's rpa expired
callback returns false, then all adv sets continues with
the old RPA.
Note: Fix is applicable only to adv sets which shares the
same id.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Commit adds const qualifier to models metadata.
Specification claims: Composition Metadata Page 0
shall not change during a term of a node on the network.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
The broadcast sink and broadcast source will now use and verify
the info returned by bt_bap_ep_get_info.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add additional validation of the config data in the broadcast
sink test, both ensuring that the BASE is properly parsed,
that the BASE contains mandatory information and that the
stream get the right values copied.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When using the LC3 codec, all codec configuration are LTV encoded.
The broadcast source did not properly validate this, and it also
uncovered a bug in the bsim test for broadcast sources.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The stack manages to suspend the advertiser before it finishes
transmitting the Outbound PDU Report message to confirm the transmission
of a Provisioning PDU. The test requires the server to become
unresponsive when the Provisioning PDU is sent to the unprovisioned
device to test timeout of the provisioning protocol.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Now, when the deadlock is removed from `bt_mesh_adv_disable` function,
the advertiser can be disabled from the `bt_mesh_send_cb`
callbacks.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
When the Bluetooth central samples in an open air environment
it is very likely that there are multiple devices nearby with
a received signal strength stronger than -70 dBm.
To avoid connecting to the wrong device, make the check stricter.
For tests using those samples, the NtNcable attenuation is changed
from the default 60 dBm to 40 dBm to satisfy the new requirement.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Rename uart and uart_async bsim test to reflect
testing of hci_uart sample using UART driver
variants under bsim simulations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Verifies that there is no host RX buffer leak due to disconnections.
That is, not actual host buffer objects but rather the number of buffers
that the controller thinks the host has.
If there is a desynchronization between those two, the result would be that
the controller stops forwarding ACL data to the host, leading to an
eventual application timeout.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
There are quite many BT host test images being built.
Today these are all built in parallel, causing a quite
high load.
Let's split them in their separate sub-scripts,
so we don't parallelize too many builds,
and users have more granularity if they only
want to build a subset.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CIS tests are building quite many
apps on their own.
Let's split them in their separate sub-script,
so we don't parallelize too many builds,
and users have more granularity if they only
want to build a subset.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
LC3 does not define any such configurations, and they are in
fact defined by the BAP. The LC3 header file should thus not
pretend that there are these specific configurations for LC3.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add tests for the GATT permissions to read and write for
characteristics that require encryption and LESC encryption.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
