It's found that in nsim_hs_smp, sometimes the cpu
doesn't response inter-core interrupt after executing sleep
instruction.
It may be a bug of nsim, but needs more time to
investigate the root of this issue.
This commit is a workround for this, as nsim is just an
instruction simulator, no direct impact.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* necessary fixes after commit 11bd67db where ipi interrupt is used
to notify other cores to do a thread switch if necessary
* then for arc, it's needed to ignore swap_ok and check whether thread
switch is needed in the exit of irq handling.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
dyn_reg_info has MPU_DYNAMIC_REGION_AREAS_NUM elements, just changing
the if check to be greater equal to this number to avoid access
MPU_DYNAMIC_REGION_AREAS_NUM element causing an out-of-bounds write.
CID: 205648
Fixes#20487
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The races are believed to be resolved with the patch to
irq_offload(). Allow the MMU to be turned on and enable
it for qemu_x86_64.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Move PLATFORM_SPECIFIC_INIT declaration from Cortex-M Kconfig to the
ARM arch Kconfig in order to make it available for all ARM variants.
The rationale is that there is really no good reason why
platform-specific initialisation should be a Cortex-M-specific feature
and that Cortex-R port is expected to utilise this in a near future.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines the direct ISR functions that were previously
implemented in irq_manage.c, since the PR #20119 resolved the circular
dependency between arch.h and kernel_structs.h described in the issue
#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit inlines arch_isr_direct_header function that was previously
placed in irq_manage.c for no good reason (possibly in relation to the
FIXME for #3056).
In addition, since the PR #20119 resolved the header circular
dependency issue described in the issue #3056, this commit removes the
references to it in the code.
The reason for not inlining _arch_is_direct_pm as the #3056 FIXME
suggests is that there is little to gain from doing so and there still
exists circular dependency for the headers required by this function
(#20119 only addresses kernel_structs.h, which is required for _current
and _kernel, which, in turn, is required for handling interrupt nesting
in many architectures; in fact, Cortex-A and Cortex-R port will require
it as well).
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Mark the old time conversion APIs deprecated, leave compatibility
macros in place, and replace all usage with the new API.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Promote the private z_arch_* namespace, which specifies
the interface between the core kernel and the
architecture code, to a new top-level namespace named
arch_*.
This allows our documentation generation to create
online documentation for this set of interfaces,
and this set of interfaces is worth treating in a
more formal way anyway.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
These are not part of the generic kernel to
architecture interface, rename appropriately to
reflect they are ARC-specific.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This API was only created to facilitate testing of kernel
objects in IRQ context, never for actual applications.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We allow the run-time, full paritioning of the SRAM space by the
ARMv8-M MPU driver to be an optional feature.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit moves the function mpu_configure_regions(.) from
arm_mpu_v7_internal.h to arm_mpu.c. The function is to be used
by the both ARMv7-M MPU driver, as well as the ARMv8-M MPU
driver (when it behaves like the ARMv7-M driver).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce MPU_GAP_FILLING Kconfig option that instructs
the MPU driver to enforce a full SRAM partitioning, when it
programs the dynamic MPU regions (user thread stack, PRIV stack
guard and application memory domains) at context-switch. We
allow this to be configurable, in order to increase the number
of MPU regions available for application memory domain programming.
This option is introduced in arch/Kconfig, as it is expected
to serve as a cross-ARCH symbol. The option can be set by the
user during build configuration.
By not enforcing full partition, we may leave part of kernel
SRAM area covered only by the default ARM memory map. This
is fine for User Mode, since the background ARM map does not
allow nPRIV access at all. The difference is that kernel code
will be able to attempt fetching instructions from kernel SRAM
area without this leading directly to a MemManage exception.
Since this does not compromize User Mode, we make the skipping
of full partitioning the default behavior for the ARMv8-M MPU
driver. The application developer may be able to overwrite this.
In the wake of this change we update the macro definitions in
arm_core_mpu_dev.h that derive the maximum number of MPU regions
for application memory domains.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Some code for unwinding stacks and z_x86_fatal_error()
now in a common C file, suitable for both modes.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
When compiling the components under the arch directory, the compiler
include paths for arch and kernel private headers need to be specified.
This was previously done by adding 'zephyr_library_include_directories'
to CMakeLists.txt file for every component under the arch directory,
and this resulted in a significant amount of duplicate code.
This commit uses the CMake 'include_directories' command in the root
CMakeLists.txt to simplify specification of the private header include
paths for all the arch components.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit refactors kernel and arch headers to establish a boundary
between private and public interface headers.
The refactoring strategy used in this commit is detailed in the issue
This commit introduces the following major changes:
1. Establish a clear boundary between private and public headers by
removing "kernel/include" and "arch/*/include" from the global
include paths. Ideally, only kernel/ and arch/*/ source files should
reference the headers in these directories. If these headers must be
used by a component, these include paths shall be manually added to
the CMakeLists.txt file of the component. This is intended to
discourage applications from including private kernel and arch
headers either knowingly and unknowingly.
- kernel/include/ (PRIVATE)
This directory contains the private headers that provide private
kernel definitions which should not be visible outside the kernel
and arch source code. All public kernel definitions must be added
to an appropriate header located under include/.
- arch/*/include/ (PRIVATE)
This directory contains the private headers that provide private
architecture-specific definitions which should not be visible
outside the arch and kernel source code. All public architecture-
specific definitions must be added to an appropriate header located
under include/arch/*/.
- include/ AND include/sys/ (PUBLIC)
This directory contains the public headers that provide public
kernel definitions which can be referenced by both kernel and
application code.
- include/arch/*/ (PUBLIC)
This directory contains the public headers that provide public
architecture-specific definitions which can be referenced by both
kernel and application code.
2. Split arch_interface.h into "kernel-to-arch interface" and "public
arch interface" divisions.
- kernel/include/kernel_arch_interface.h
* provides private "kernel-to-arch interface" definition.
* includes arch/*/include/kernel_arch_func.h to ensure that the
interface function implementations are always available.
* includes sys/arch_interface.h so that public arch interface
definitions are automatically included when including this file.
- arch/*/include/kernel_arch_func.h
* provides architecture-specific "kernel-to-arch interface"
implementation.
* only the functions that will be used in kernel and arch source
files are defined here.
- include/sys/arch_interface.h
* provides "public arch interface" definition.
* includes include/arch/arch_inlines.h to ensure that the
architecture-specific public inline interface function
implementations are always available.
- include/arch/arch_inlines.h
* includes architecture-specific arch_inlines.h in
include/arch/*/arch_inline.h.
- include/arch/*/arch_inline.h
* provides architecture-specific "public arch interface" inline
function implementation.
* supersedes include/sys/arch_inline.h.
3. Refactor kernel and the existing architecture implementations.
- Remove circular dependency of kernel and arch headers. The
following general rules should be observed:
* Never include any private headers from public headers
* Never include kernel_internal.h in kernel_arch_data.h
* Always include kernel_arch_data.h from kernel_arch_func.h
* Never include kernel.h from kernel_struct.h either directly or
indirectly. Only add the kernel structures that must be referenced
from public arch headers in this file.
- Relocate syscall_handler.h to include/ so it can be used in the
public code. This is necessary because many user-mode public codes
reference the functions defined in this header.
- Relocate kernel_arch_thread.h to include/arch/*/thread.h. This is
necessary to provide architecture-specific thread definition for
'struct k_thread' in kernel.h.
- Remove any private header dependencies from public headers using
the following methods:
* If dependency is not required, simply omit
* If dependency is required,
- Relocate a portion of the required dependencies from the
private header to an appropriate public header OR
- Relocate the required private header to make it public.
This commit supersedes #20047, addresses #19666, and fixes#3056.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Clean up space errors and use a consistent style throughout the Kconfig
files. This makes reading the Kconfig files more distraction-free, helps
with grepping, and encourages the same style getting copied around
everywhere (meaning another pass hopefully won't be needed).
Go for the most common style:
- Indent properties with a single tab, including for choices.
Properties on choices work exactly the same syntactically as
properties on symbols, so not sure how the no-indentation thing
happened.
- Indent help texts with a tab followed by two spaces
- Put a space between 'config' and the symbol name, not a tab. This
also helps when grepping for definitions.
- Do '# A comment' instead of '#A comment'
I tweaked Kconfiglib a bit to find most of the stuff.
Some help texts were reflowed to 79 columns with 'gq' in Vim as well,
though not all, because I was afraid I'd accidentally mess up
formatting.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In the cortex-r port we are currently using GIC as a fake cascade
controller hooked to a fake parent IRQ #0. And in gic_init() we use
IRQ_CONNECT() to connect this dummy IRQ.
Unfortunately this value is shifted and offset when calling
irq_set_priority_next_level() that tries to set the IRQ priority on a
value of 0xffffffff.
This value is offset again in gic_irq_set_priority() that actually sets
the priority on the PPI #31.
Fix this avoiding to set any priority for IRQ #0.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Existed already in commit 8ddf82cf70 ("First commit"). Has never been
used.
Found with a script.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Existed already in commit 8ddf82c ("First commit"). Has never been
used.
Found with a script.
Also remove some pointless menus that have no visible symbols in them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adding r0 to the clobber list in the inline ASM block of
z_arch_switch_to_main_thread(). This instructs assembler
to not use r0 to store ASM expression operands, e.g. in
the subsequent instruction, msr PSR %1.
We also do a minor optimization with the clearing of R1
before jumping to main.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add a common definition for NUM_IRQS in arch/arm/core/Kconfig and
arch/riscv/Kconfig. That way, the type doesn't have to be given for
NUM_IRQS in all the Kconfig.defconfig files.
Trying to get rid of unnecessary "full" symbol definitions in
Kconfig.defconfig files, to make the organization clearer. It can also
help with finding unused symbols.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are two set of code supporting x86_64: x86_64 using x32 ABI,
and x86 long mode, and this consolidates both into one x86_64
architecture and SoC supporting truly 64-bit mode.
() Removes the x86_64:x32 architecture and SoC, and replaces
them with the existing x86 long mode arch and SoC.
() Replace qemu_x86_64 with qemu_x86_long as qemu_x86_64.
() Updates samples and tests to remove reference to
qemu_x86_long.
() Renames CONFIG_X86_LONGMODE to CONFIG_X86_64.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Define FP_FPU_DA in arch/arc/Kconfig to make it always available. That
way, the Kconfig.defconfig definitions can skip the type, making them
incomplete if the base definition of the symbol disappears. That makes
the organization easier to understand and errors easier to spot.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Define CPU_EM4* and CPU_EM6 in arch/arc/Kconfig to make them always
available. That way, the Kconfig.defconfig definitions can skip the
type, making them incomplete if the base definition of the symbol
disappears. That makes the organization easier to understand and errors
easier to spot.
The help texts were taken from
https://gcc.gnu.org/onlinedocs/gcc/ARC-Options.html. Help texts for
invisible symbols can be checked in the menuconfig too if you go into
show-all mode, so they're better than adding a comment.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
posix_soc_if.h is meant to be a private header between
the POSIX ARCH, SOC, and maybe boards,
it should not contain definitions meant to be used directly
by the kernel or app.
Some definitions were placed here due to a dependency moebius
loop.
Unravel that by removing all header dependencies in posix_soc_if.h,
move those definitions out to a more logical place,
and while we are here reduce the amount of users of
irq_offload.h in POSIX arch related code
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The page tables to use are now stored in the cpuboot struct.
For the first CPU, we set to the flat page tables, and then
update later in z_x86_prep_c() once the runtime tables have
been generated.
For other CPUs, by the time we get to z_arch_start_cpu()
the runtime tables are ready do go, and so we just install
them directly.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
- Bring in CONFIG_X86_MMU and some related defines to
common X86 Kconfig
- Don't set ARCH_HAS_USERSPACE for intel64 yet when
X86_MMU is enabled
- Uplevel x86_mmu.c to common code
- Add logic for handling PML4 table and generating PDPTs
- move z_x86_paging_init() to common kernel_arch_func.h
- Uplevel inclusion of mmustructs.h to common x86 arch.h,
both need it for memory domain defines
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Program text, rodata, and data need different MMU
permissions. Split out rodata and data from the program
text, updating the linker script appropriately.
Region size symbols added to the linker script, so these
can later be used with MMU_BOOT_REGION().
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Same deal as in commit 7fdb525754 ("kconfig: Use 'default' instead of
'def_bool' in Kconfig.defconfig files"), but I hacked Kconfiglib to also
find cases where the type is given separately as e.g.
config FOO
int
default 3
Motivation (from a note in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html):
For a symbol defined in multiple locations (e.g., in a
Kconfig.defconfig file in Zephyr), it is best to only give the
symbol type for the "base" definition of the symbol, and to use
'default' (instead of 'def_<type>' value) for the remaining
definitions. That way, if the base definition of the symbol is
removed, the symbol ends up without a type, which generates a
warning that points to the other definitions. That makes the extra
definitions easier to discover and remove.
It's also nice if 'def_bool' and the like turn into a semi-reliable flag
that the symbol is only defined in Kconfig.defconfig files. That might
be a sign that things could be cleaned up.
Will do a separate pass later to remove some symbols only defined in
Kconfig.defconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
We add an ARM internal API which allows the kernel to
infer the execution mode we are going to return after
the current exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We introduce a Kconfig option to signify whether
an Architecture has the capability of detecting
whether execution is, currently, in a nested
exception.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We re-implement the z_arch_is_in_isr function
so it aligns with the implementation for other
ARCHEs, i.e. returning false whenever any IRQ
or system exception is active.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit refactors and cleans up __fault, so the function
- reduces to supplying MSP, PSP, and EXC_RETURN to the C
function for fault handling
- simplifies itself, removing conditional
implementation, i.e. based on ARM Secure firmware,
The reason for that is simple: it is much better to write the
fault handling in C instead of assembly, so we really do only
what is strictly required, in assembly.
Therefore, the commit refactors the z_arm_fault() function
as well, organizing better the different functional blocks,
that is:
- unlocking interrupts
- retriving ESF
- asserting for HW errors
- printing additional error logs
The refactoring unifies the way the ESF is retrieved for the
different Cortex-M variants and security execution states.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add some documentation for ARM-specific function
z_do_kernel_oops, stating clearly that it is only
invoked inside SVC context. We also comment on
the validity of the supplied ESF.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We add a useful inline comment in the SVC handler (written in
assembly), which identifies one of the function return points
a bit more clearly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Replace:
dt_chosen_reg_addr
dt_chosen_reg_size
dt_node_reg_addr
dt_node_reg_size
with:
dt_chosen_reg_addr_int
dt_chosen_reg_size_int
dt_chosen_reg_addr_hex
dt_chosen_reg_size_hex
dt_node_reg_addr_int
dt_node_reg_size_int
dt_node_reg_addr_hex
dt_node_reg_size_hex
So that we get the proper formatted string for the type of symbol.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
"brk" is a break-point instruction which among other things
halts ARC core. As compared to pure halt (which is "flag 1" for ARC)
it is much more convenient as it might be executed from either
secure mode or normal mode (with SecureShield enabled), while "flag"
instruction will raise privilege violation exception if SecureShield
is enabled and we're in "normal" mode.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
