Added test to verify deferred ACL Tx transmission setup,
such that GATT discovery completes with least latency and
GATT notifications can be received earliest after connection
establishment.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implemented:
* Central sync to broadcaster, connects to peripheral and
transfers sync. Peripheral Syncs to PA
* Broadcaster acting Central connects to peripheral
and transfers sync. Peripheral sync to PA
* Moved previous bis tests to test_bis.c and
new PAST tests was added in test_past.c
Signed-off-by: Lucas Mathias Balling <lutb@demant.com>
If we get an error/rejection from the CAP acceptor when
performing the Unicast Audio Start or Stop procedure then
we need to abort the procedure and let the application determine
what the next step is.
This change triggered a corner case when connecting to multiple
CAP acceptors as the CAP initiatior. This was also fixed as part
of this.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Changed dependency of the BT_BAP_SCAN_DELEGATOR to GATT_DYNAMIC_DB
from 'select' to 'depends on' and solved all loop dependencies
caused by this change.
Fixes#79108
Signed-off-by: Babak Arisian <bbaa@demant.com>
The own_addr_type used for various HCI commands sometimes
had a BT_HCI_OWN_ADDR_* type value or a BT_ADDR_* type
value. Those are 2 different value spaces, and if the public
address types would ever change, it would start have incorrect
behavior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added the battery critical status char to bas service
as per bas_1.1 spec. Updated BSIM test for BAS service
to test the INDs of BAS critical characteristic.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
If the Broadcast ID is initially set to 0x000000,
which is valid, comparison logic on add of an
actual Broadcast ID of 0x000000 fails.
Likewise for SID.
Moving INVALID_BROADCAST_ID define to bap.h
Signed-off-by: Lars Knudsen <LAKD@demant.com>
Instead of having one large compile.sh for all audio samples,
it has been split into multiple. This makes it easier to
build and run specific tests (e.g. BAP or CAP), without
having to build all of them.
This also makes it easier to expand later, without
creating one huge compile.sh file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add scan cb to scan delegator so that Application
can be notified when assistant starts or stops
scanning.
Also state information of Broadcast Assistant
is removed as info is not used.
Signed-off-by: Nithin Ramesh Myliattil <niym@demant.com>
Modify the BAP unicast client callback structure to be a
linked list. The purpose of this is to have multiple listeners
of the unicast client changes and notifications.
This is needed for the CAP initiatior.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The host-based adv auto-resume function has both a problematic
implementation and disagreement in the community around how it should
behave. See the issue linked resolved below for details.
This patch makes the deprecation visible to the user. The user will be
better served by a auto-resume tailored their applications use case,
based on more primitive host API like `conn_cb.recycled`, which has
obvious behavior that is unlikely to change.
Resolves: https://github.com/zephyrproject-rtos/zephyr/issues/72567
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
The QoS structure is not related to a codec, but rather a
stream, and should thus not use the "Codec" name.
The BAP and ASCS specs refer to the QoS as
"QoS configuration" several places, so it is an obvious
choice for a name.
Since the structure is defined and used by BAP, the prefix
was changed from bt_audio to bt_bap.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the `bt_mesh_brg_cfg` prefix to the public Subnet Bridge API, and
aligns the function and callback naming with the rest of the Bluetooth
Mesh API.
Signed-off-by: Håvard Reierstad <haavard.reierstad@nordicsemi.no>
Do not override the cmake_args parameter, but instead use the
cmake_extra_args one.
Otherwise we lose the default -DCONFIG_COMPILER_WARNINGS_AS_ERRORS=y
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The unicast_stop function is changed to primarily do a
BAP disable instead of a release, with optional
support for releasing the streams once they have been disabled.
This also adds unittests for the procedure which also
allow us to remove the invalid param testing from the BSIM tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added support for dynamic registration and unregistration of the
Broadcast Audio Scan Service (BASS) within the scan delegator.
This enables both scan delegator and BASS to be registered or
unregistered dynamically at runtime.
Signed-off-by: Babak Arisian <bbaa@demant.com>
The TBS and GTBS instances can now be dynamically registered
and unregistered, which fits better for the use cases of TBS
where specific bearers can come and go depending on the
features of the device.
For example if a SIM card is inserted, then a device can
register a TBS for the provider and remove it again if the
SIM card is removed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add broadcast support for the CAP acceptor sample.
This adds new sample-specific Kconfig options to help
select the right Kconfig options based on whether
unicast, broadcast or both is being used.
The babblesim implemented for the broadcast has been expanded
to verify that the CAP acceptor receives the broadcast audio.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
In the case that a broadcast sync fails for any reason, we need to
set the BIS_Sync value for all subgroups to 0xFFFFFFFF
(BT_BAP_BIS_SYNC_FAILED) as per the BAP spec.
This commit adds a new define for this and modifies
both the scan delegator and broadcast sink to support this.
The change is validated by a modification to the broadcast
assistant test that verifies that the value is set in the
case of an invalid broadcast code (which indicates a
failed BIG sync).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
BAP mandates support for bondable mode for all central and
peripheral roles.
Due to Kconfig circular dependencies, some additional
Kconfig changes had to be made.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryption, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Let's run tests with security/privacy with the HW models acutually
running the encryptions, so in case of missaligned keys
tests fail.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
More information in the test description.
Why: At the time of writing, this test exposes a bug in the Bluetooth stack
where all the RX buffers are in use, and the controller driver fails to
synchronously allocate a command response buffer.
This is manifested in an assertion failure in `hci_common.c`.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
Adds coverage for attempting to connect while already connecting
or connecting to a device that already exists.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Removed deprecated native_posix as test platform.
Added unique sim_ids for tests with the psa as a overlay.
Fixed clang-format issues.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
This commit adds the following tests:
- Simple test for bridging table
- Test bridging table state changes
- Test persistence storage of subnet bridge
- Test IV Index update with subnet bridge
- Test network key removal for subnet bridge
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Adding documentation and function calles for the API's
in Bridge Configuration Client model and Bridge
Configuration Server model.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
Any places that checked for GTBS is now always enabled
as GTBS is mandatory to support, and the Kconfig option
was removed.
Also removed a duplicate Kconfig option for TBS,
BT_TBS_SERVICE_COUNT, as it was unused.
The other Kconfig option BT_TBS_BEARER_COUNT is used
instead exclusively to set it if needed.
Since GTBS can now exist alone, it must also
support having its own calls and other values.
This means that the GTBS and TBS instances now share
the same underlying struct.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace the boolean values for the BAP Broadcast Assistant
with an atomic value. This prevents a rare, but possible,
race condition.
The busy flag has been replaced with 3 atomic values which
provide better granularity in error handling, and allows for
some concurrent write and read requests.
To describe the new behavior, the return values in the documentation
has been updated, and the error handling in the API
functions has improved.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added option to set the ASE count through the bap API, making ASE
configuration runtime available. The upper limit of ASEs are still
bound by the Kconfig options set for ASEs.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
Add missing braces to comply with MISRA C:2012 Rule 15.6 and
also following Zephyr's style guideline.
Signed-off-by: Pisit Sawangvonganan <pisit@ndrsolution.com>
Add support for running the audio BSIM tests on the
nrf5340bsim board.
This expands the tests we run in CI.
To support all tests with the hci_ipc sample for the netcore,
it is updated to support a bit more while still fitting on the
netcore on the nRF5340 series.
The behavior of advertisement seems to differ a little bit,
which required the bap_unicast_server_test.c to update how it
restarts advertisements.
Two broadcast tests that are passing on the nRF52 BSIM is also
failing due an assert. This should be investigated at a later
time.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Move the network buffer header file from zephyr/net/buf.h to
zephyr/net_buf.h as the implementation now lives outside of the networking
subsystem.
Add (deprecated) zephyr/net/buf.h header to maintain compatibility with old
file path.
Signed-off-by: Henrik Brix Andersen <henrik@brixandersen.dk>
Use fallbacks in codec cfg functions in the BAP broadcast
babblesim tests to avoid unnecessary noise in the logs of
the tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The TBS client callbacks are just informative so we
provide the information to multiple listeners.
To support this for the long strings, the function
handle_string_long_read was refactored.
This also allows for multiple users of the TBS client.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When the encrypt state was changed via
bt_bap_scan_delegator_mod_src then we didn't set the bad
broadcast code correctly.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a bsim test that verifies the behavior when the
assistant provides an incorrect code to the broadcast
sink.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
