Move to a new guide which will expand on how to submit modules and how
to maintain them.
Also move topology documentation to repository management section where
it fits better.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
builds@lists.zephyrproject.org archives the CI build results for every
and nightly build. Add references to this in the contribution
guidelines and introduction (pulled from README).
Also added a reference to the "Asking for Help" doc (there was a note to
add this once that doc was merged).
Fixes: #15652
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The current order makes no sense. Move it earlier in the order, so the
catch-all page appears last.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Grammar and formatting improvements, as well as changes requested in
review that weren't made (in particular, the ones recommending using
"pip3 show -f west" to see where west is installed instead of listing
common places that might not be right.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Zephyr requires braces on every code block that a keyword introduces, so
list the complete set in the documentation.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fixes a corner case.
The ZEPHYR_BASE variable might be set in the environment at generation
time, but unset at build time. Save it in the cmake -E env calls to
scripts that need it.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Create a new dedicated section for west installation that details
some of the finer aspects of the process and steps involved.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a completion command that dumps the contents of a shell
completion file present in the zephyr repository.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
The approved trademark name is Wi-Fi so update references to WiFi and
other spellings to Wi-Fi in documentation and Kconfig help strings.
(Note that use of spelling variatios of "wifi" in module names, CONFIG
names, link names and such are untouched.)
https://www.wi-fi.org/
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The west build --help output no longer fits in a single page. Move
details and examples into the documentation, so the -h output doesn't
require scrolling around.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This can be used to override the default CMake generator
permanently. Its values are the same as those acceptable to cmake's -G
option.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Try to make the language simpler. Introduce each example with a
paragraph that says "To <DO XYZ>" to make them easier to find.
Move the config options to the documentation for that command to make
them easier to find.
Add some more examples for use cases we've gotten questions about.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
- Respect the BOARD environment setting.
- Don't require --force if the board can't be figured out: it might be
set in CMakeLists.txt, for example. Instead, downgrade to a warning
which can be disabled with "west config build.board_warn false".
- Add a build.board configuration option used as a final BOARD fallback
after CACHED_BOARD (in the CMake cache), --board (command line), and
BOARD (environment).
- Keep the config docs up to date.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Add a new "boards" command that is able to list all the boards in the
upstream tree. There is currently no support for out-of-tree boards.
The command executes cmake to use the built-in CMake script,
boards.cmake, to list the boards, and then stores the information
retrieved and allows the user to present it in a user-definable format.
Fixes https://github.com/zephyrproject-rtos/west/issues/53
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit removes the activation of the FP context
in ARM system boot. There is no need to do this, since
the FP context will be activated in the presence of
floating point instructions. We update the reference
documentation accordingly.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Added macros which can be used to create a command which depends
on compilation flag. Macros are a cleaner alternative to #ifdefs
around command registration and command handler.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Major changes are:
- Expose settings backend API to enable custom backend support.
- Add a new CONFIG_SETTINGS_CUSTOM backend to allow registering a custom
backend.
- Change api of the handlers h_set() routines to allow for
backend-specific read callbacks.
- Provide a customizable settings_backend_init() routine for custom
backends.
- Move runtime settings support to be its own backend.
Signed-off-by: François Delawarde <fnde@oticon.com>
The previous mcuboot reference didn't make sense - it linked to
itself. Linking to the official website should be more useful.
Signed-off-by: Jacob Siverskog <jacob@teenage.engineering>
When making a build folder pristine until now we were running the
'pristine' build target. The issue with that is that ninja/make or
whatever build tool is being used might decide to re-run CMake itself if
some of the dependencies have changes. This might trigger an error that
is unfriendly and unnecessary, since the user is explicitly asking for
the build folder to be wiped before starting a fresh build.
To avoid this issue restor to running directly the CMake script that the
'pristine' build target itself uses, so as to make sure that the build
folder is wiped unconditionally regardless of changes made to the tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The dependencies in the scripts are figures, images, includes or literal
includes. Typically those dependencies are placed relative to the .rst
file that is being copied, but in some instances you might want them to
refer to an absolute path which, in fact, is relative to Sphinx's
top-level source directory. In this case, and as long as the top-level
source directory is provided, do not emit a warning.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
I often wish I had a short and Zephyr-specific place to point people
to when they're asking for help in ways that make it hard to help
them.
Add one.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Previously, symbols not defined with 'menuconfig' with children weren't
listed in the children's menu paths. It was deliberate, but it's
probably an anti-feature in retrospect, because it can make it harder to
find stuff by following the menu path.
Don't try to be clever and just list all the parent nodes in the menu
path.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Just like board's can be placed in out-of-tree BOARD_ROOT's, we now
support DeviceTree sources and bindings being placed in out-of-tree
DTS_ROOT's.
This required for out-of-tree drivers that use DeviceTree.
To implement this we get rid of various user-settable CMake variables
like DTS_APP_BINDINGS, DTS_APP_INCLUDE, and instead have ZEPHYR_BASE,
APPLICATION_SOURCE_DIR and out-of-tree directories conform to using
the same DTS_ROOT concept and directory structure.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add a new command-line and build config option, `pristine`, that the
user can pass to `west build` or set in its configuration file(s) in
order to automatically trigger a pristine build on every build or
whenever west considers it required.
The option can take the following values:
- never: Never run the target
- always: Always run the pristine target before building
- auto: Run the pristine target when required
With `auto`, the pristine target will be run when running
west with an existing build folder containing a build system and:
- Selecting a different board from the one currently in the build system
- Selecting a different application from the one currently in the build
system
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
All docs should have a label at the top that would
permit cross-document linking via :ref:`labelname`.
Update "testing" label that would have conflicted and fix the only
reference to the old "testing" label in development process
documentation.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Clean up accumulated release notes with (final) clarity edits, spell
check, and such. Remove "Working Draft" from the heading.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Added information to release notes about Zephyr modules which allow for
splitting ext/ into multi-repo instead using Zephyr modules.
Signed-off-by: Torsten Rasmussen <torsten.rasmussen@nordicsemi.no>
