Includes the definition of the STM32_DMA_STREAM_OFFSET
depending on the peripheral to adjust the first DMA channel
in the list of streams.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
In the dma.h there is a dma_ctx structure using a magic code
to be identify. This structure must be prepared as a new
element of the dma_stm32_data.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
This is the configuration of the stm32h723 where the
dma1 & dma2 of type V1 with a MUX. Even if DMA is of type V1,
the 'feature' does not exist with DMAMUX
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the missing parts for adding support
to stm32h7 dma driver.
The fix is to make dmamux driver work with
dma v1 driver.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
When checking for IRQ flags, we should also check
for IRQ status (IsEnabled ?).
If this is not done we can end up in Half Transfer
interrupt processing while it is not enabled.
Additionaly always use the id translation function
in LL API calls.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
In preparation for QSPI DMA mode:
-Add a possibility to override driver by the HAL DMA. In that case
stream is set as busy and no configuration nor treatment is done.
In case of interrupt, flags clearing is let to HAL.
-Treat Half Transfer interrupt prior to Transfer Complete for the
cases were both IRQ are both raised at the time IRQ handler is called
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add `get_status` function to dmamux driver api.
This uses the regular dma driver `get_status` function.
Signed-off-by: Shlomi Vaknin <shlomi.39sd@gmail.com>
This new offset value in the dma config is made to
build the table of dma mux_channels with a dmamux.
Range depends on the nb of channels for selected dma instance
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Convert global conversion tables for id-to-stream and slot-to-channel
to functions that use local const static conversion tables.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
- Remove the need for kmalloc
- On hardware that supports it use 1 IRQ handler per stream to
determine the stream ID, so the ISR does not have to loop
over all ID's to see which one is active. On hardware (like
STM32L0 and STM32F0) where up to 7 streams share 3 IRQ's use
the loop to check which stream is active.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Use volatile for flag shared between normal code and ISR to
prevent the compiler from possibly optimizing it away.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Now that device_api attribute is unmodified at runtime, as well as all
the other attributes, it is possible to switch all device driver
instance to be constant.
A coccinelle rule is used for this:
@r_const_dev_1
disable optional_qualifier
@
@@
-struct device *
+const struct device *
@r_const_dev_2
disable optional_qualifier
@
@@
-struct device * const
+const struct device *
Fixes#27399
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch prepares the dma and introduces the dmamux on soc series
which supports this feature for memory/periph transfers.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
define the irq handler in case of DMA V1 or V2,
for the stm32x soc series
with DMA V1 raise Fifo Error if enabled
with V2, handle the Global Interrupt
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Move tables declaration as they are only used locally for now
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Control values when configuring the dma channel
According to the soc specification,
the dma V2 channel counts from 1.
the dma V1 stream counts from 0.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The DMA driver of stm32 used to use `stm32_dma_enable_fifo()`,
which is located in dma_stm32_v1.c to set DMDIS bit, enable
interrupt generation and set FIFO threshold. Now since FIFO
threshold is initialized with `stm32_dma_get_fifo_threshold()`
and interrupt generation is also configured in dma_stm32.c, this
function will only have one job, to configure FIFO mode.
We can add FIFO mode operation in dma_stm32.c directly and
remove it from dma_stm32_v1.c.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
This commit adds driver support for DMA on f0/f1/f2/f3/f4/l0/l4
series stm32.
Notice due to some bugs, this is currently not working with f7.
There are two kinds of IP blocks are used across these stm32, one is the
one that has been used on F2/F4/F7 series, and the other one is the one
that has been used on F0/F1/F3/L0/L4 series.
Memory to memory transfer is only supported on the second DMA on
F2/F4 with 'st,mem2mem' to be declared in dts.
This driver depends on k_malloc to allocate memory for stream instances,
so CONFIG_HEAP_MEM_POOL_SIZE must be big enough to hold them.
Common parts of the driver are in dma_stm32.c and SoC related parts are
implemented in dma_stm32_v*.c.
This driver has been tested on multiple nucleo boards, including
NUCLEO_F091RC/F103RB/F207ZG/F302R8/F401RE/L073RZ/L476RG with the
loop_transfer and chan_blen_transfer test cases.
Signed-off-by: Song Qiang <songqiang1304521@gmail.com>
