bt_l2cap_chan_send does actually return the number of bytes sent.
Change-Id: I862a8519c752c6b26250a21be02a927a9326617c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implementing on_ble_get_version_rsp() allows to check firmware version
of Nordic BLE chip.
Current output is (stripped):
...
bt: on_ble_get_version_rsp: VERSION: 0.0.0 ATP1BLE000-1604C5546
...
Change-Id: I98d3cd659cbed86b31eb90aac0e3ae876daf616a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Now that nble driver is supported bt_enable cannot be called blocking
since it is not supported, futhermore the call to bt_gatt_register
should be done after bt_enable is complete.
Change-Id: I404f8cd8b8339dba0fd26d24edeb718eba4bf225
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Buffer returned by l2cap_chan_create_seg should be unreffed if
disconnected.
Change-Id: Ib794ecc98618eddc9d92b2dc2edf829c50123418
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This enables this test case for arduino_101 platform.
Change-Id: I2a94fb90f4c57022ddf1ec11ab06bb5e59de9b6e
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Board already defined in platform_whitelist
Change-Id: I2fed4b3c0663fd15d43ee697837a89439f7bd07a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
!BLUETOOTH is almost always when not using BLE, so depend
on NBLE being configured as well to set various options.
Change-Id: Idc61cee277fe0f09086a9f2ed6eb419aee5fd69c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
To access the 16-bit value of GATT UUIDs it's quite overkill to first
create anonymous UUID structs and then access the value member from
them. We can simplify this a lot with the help of the recently added
UUID value definitions.
Change-Id: Ib58012c20d07b3e60e5911cea6feb73301d1323c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In some cases we need the raw 16-bit UUID value instead of a full UUID
object. Add definitions of these values so that the code doesn't need
to do complicated tricks to get hold of them.
Change-Id: I98f276402f20fe03fea2777743f15ca7fcae42c6
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't use NULL pointer if aquiring net buffer failed.
Change-Id: I11a22b832d1da9559b90abe0cb83eed56d14722f
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds conversion of advertising data (adv_data) to be used by
bt_le_adv_start function.
Change-Id: I403ff7ebed89dbf763d258b5dcdabfbb2cb68260
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Test can be verified with
$ sanitycheck -s bluetooth/shell/test_nble -v
arduino_101 bluetooth/shell/test_nble PASSED
Change-Id: Icfc5892524041d169973bd6eb7d23b6ecffb98fc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix compiler errors when CONFIG_BLUETOOTH_BREDR is not enabled.
Change-Id: I003985a9769120b3314eaf1b9563a3bf9712e32a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move buf_data to the place it is used reducing errors when dynamic
channels are disabled.
Change-Id: I82f640ffa8046e1c9b5805658e69cb722856d445
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This reuses the existing code since that is not driver specific, with
this samples such as tester can be build using nble driver.
Change-Id: I6d9f3edf8deb2e84fce233ef02d1cd0ad6f52526
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables simpler permissions as it is not longer needed to include
BT_GATT_PERM_READ or BT_GATT_PERM_WRITE.
Change-Id: I0c749b75bedb125bda8ea451474c82eec13d3c38
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current quark_se target is not specified in
scripts/sanity_chk/arches/x86.ini list and apparently this is the
reason tests were not executed, change it to arduino_101.
Change-Id: Ifedcf08cc9b25839d389bd7eb92ed42012e9075a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Putting right target allows to build for arduino_101.
Change-Id: Ib11244c7f024c72f0ab0b15549be57c576bdef3c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Currently it is not possible to build for Arduino since wrong platform
was specified.
Change-Id: I85ff6f5adb003db9a0905d6afa04bb5dfbd55d53
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The current format used is a swap of RFC 4122 thus the 16 bit values do
come at the end not at the beggining and data need to be swapped.
Change-Id: I38a27cdf82a28d28e47675f719772278d85deaaa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In addition to having a different CONF_FILE bt_enable needs to be given
a callback since nble driver cannot block while initializing.
Change-Id: I8bd2c79d0620e93dbecfef25c49c5529ff1ee954
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Adjusts encryption state name in connection complete event.
Change-Id: Ib7e6b2c5738ca9f5832e0e277d8f5718050f4bef
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
In legacy passkey entry method confirm value is sent first.
Change-Id: Ic379650dab64715be6d281fa8d3389f5ff34a978
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use uint8_t for pointer arithmetic when clearing SMP context so that
correct memory is cleared.
Change-Id: I8b88bc4c2eb181397bce5fb80a6ab250086cb17d
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
There are situations when nble_read() might stuck reading from UART when
there is no data. Limit number of tries to 10.
Change-Id: I23380b622439ce9fa72b05f4eb527f03c749fce8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement using printf(), to make correct stack use define check.
Change-Id: I81894ccb511f921a5fcff37d85790191251d683f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Since the headers defining RPC with Nordic chip changes frequently
define weak functions printing BT_WARN("Not implemented") if
function is not defined.
Weak function symbol is marked with "W" as viewed by nm.
Change-Id: Ia39b64c6e89fdddc65683711fd192a235fe754d4
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This lowers the chance of running out of buffers when sending or
receiving a lot of data.
Change-Id: Ifedc5652f993fa54f7aded87aef545ffb49e7581
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The RPC code is not net_buf aware so it will not update the net_buf
length when encoding data into it. We have to therefore do it
ourselves.
Change-Id: I7d7d3c09007a2a9bce822625607dbf7470a7ea0b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Make code readable removing extra spaces.
Change-Id: I61e3486e1d301ff7d36fd2e34243ff6e9111e54d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove extra spaces and make code readable
Change-Id: I3e57a5440476eb0143d19ce9865d3a76c58b90d1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Include all functions using previously defined stubs.
Change-Id: If9ab3f02d2e3e1f27c09b0d666fcf531cf76898d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Move receiving logic to fiber rx_fiber(). rx_queue is registered with
uart driver and all data is sent there for processing. Clean up old
ipc_channel interface since there will be only one interface to uart
driver.
Change-Id: I292863b1f38e5adb8ca4e6ac63aed09c83de56bf
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding callback to be called when NBLE
is up.
Change-Id: I2a8a2238942c0adae2a5c47cfe94d8f2b1112810
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Refactored Johan Hedberg's code adding writing to NBLE_BTWAKE_PIN one
to drive it high, needed to wake up NBLE chip.
Change-Id: I63b9583281db897f2326e4570716c25ce181128f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Port RPC deserialization to Zephyr upstream.
Change-Id: Icc9e055565185e907f51832443386f929a752586
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>