Coverity analysis discovered that observer filter policy
field was 1 bit, whereas valid range for extended scanner
filter policy feature implemented in controller is 0 to 3.
Increase the bit field size from 1 to 2.
Change-Id: Id4b2e354961dfb3b45f72fa4e0ab18de7425bbb5
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
This fix using incorrect address type for passive scanning with
privacy enabled. Controller was not reporting directed advertising
to RPA address due to public type being used for passive scan.
This was affecting TC_CONN_GCEP_BV_01_C, TC_CONN_ACEP_BV_01_C and
TC_CONN_DCEP_BV_01_C qualification test cases.
Jira: ZEP-1200
Change-Id: Icc316441fcac1a72d75f9ade27a99030efc846b9
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This might create confusions when debugging as usually the prefix is
associated with the file or layer.
Change-Id: Ibf45578c1f54a4bec896acd6042589c815216e1f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
BR/EDR code should have minimal impact on LE code so to keep it simple
just require peripheral and central to be enabled when selecting BR/EDR
support.
Fix following Kconfig warning:
warning: (NETWORKING_WITH_BT && BLUETOOTH_BREDR) selects
BLUETOOTH_L2CAP_DYNAMIC_CHANNEL which has unmet direct dependencies
(BLUETOOTH && BLUETOOTH_HCI && BLUETOOTH_HCI_HOST && BLUETOOTH_CONN
&& BLUETOOTH_SMP)
Change-Id: I7f7cb8794def0df6daaa4abfe4596df460f1a2b2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Fix following warning:
CC subsys/bluetooth/host/monitor.o
In file included from zephyr/include/drivers/loapic.h:58:0,
from zephyr/include/drivers/ioapic.h:22,
from zephyr/include/drivers/sysapic.h:20,
from zephyr/include/arch/x86/irq_controller.h:33,
from zephyr/include/arch/x86/arch.h:28,
from zephyr/include/arch/cpu.h:23,
from zephyr/include/kernel.h:2458,
from zephyr/include/zephyr.h:20,
from zephyr/subsys/bluetooth/host/monitor.c:24:
zephyr/subsys/bluetooth/host/monitor.c: In function
'_deprecation_check_sys_init_bt_monitor_init0':
zephyr/include/device.h:130:16: warning: '_INIT_LEVEL_PRIMARY' is
deprecated [-Wdeprecated-declarations]
static struct device_config _CONCAT(__config_, dev_name) __used \
^
zephyr/include/device.h:245:2: note: in expansion of macro
'DEVICE_AND_API_INIT'
DEVICE_AND_API_INIT(dev_name, drv_name, init_fn, data, cfg_info, \
^
zephyr/include/init.h:69:2: note: in expansion of macro 'DEVICE_INIT'
DEVICE_INIT(_SYS_NAME(init_fn), "", init_fn, NULL, NULL, level, prio)
^
zephyr/subsys/bluetooth/host/monitor.c:193:1: note: in expansion of
macro 'SYS_INIT'
SYS_INIT(bt_monitor_init, PRIMARY, MONITOR_INIT_PRIORITY);
^
zephyr/include/device.h:48:31: note: declared here
static __deprecated const int _INIT_LEVEL_PRIMARY = 1;
Change-Id: Ie903e3a075f6614b26018be5769be3651f0963be
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Added implementation for HCI Reset Command. Implementation
gracefully disables any running advertiser, observer, and/
or connection roles, and it resets controller context members.
The HCI Reset Command is implemented in such a way that
driver instances shared with other sub-systems and
application is not disturbed and instance/references used
by Bluetooth Controller are gracefully returned back.
Jira: ZEP-1282
Change-id: Ifb9ae6807736b5ec2d9f346cf2a590322056bcee
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This fixes issue that L2CAP Connection Parameters Update Request was
not sent. There was check that used LE features of host controller
to determine if L2CAP procedure or LL shall be used. It was failing
with 4.2 controller. The check shall test if remote supports
LL Connection Parameters Request Procedure. If it's not supported,
then L2CAP Connection Parameters Update Procedure will be used.
Closes ZEP-1220
1/4 L2CAP TC_LE_CPU_BV_01_C PASS
2/4 GAP TC_CONN_CPUP_BV_01_C PASS
3/4 GAP TC_CONN_CPUP_BV_02_C PASS
4/4 GAP TC_CONN_CPUP_BV_03_C PASS
Change-Id: I61ad544d9568ca6306a845e05c1a2e28d1693ab4
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Using the K_* macros makes it easier to read what exactly the various
timeouts are.
Change-Id: Ia405d3760b8e600af7e33a7221ef6ec717708973
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Also fixes up Kernel Primer examples to use these macros.
Change-Id: Ib1bc9e3f85ab75f81986bc3930fb287266a886b5
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Rewrites the example of a timer's expiry routine offloading
processing that can't be done at interrupt level. The example
now submits work to the system workqueue directly, rather than
using an alert. This saves footprint by eliminating the need
for alert-related API support that isn't needed. (This is a
true savings, since the alert code just called the same
workqueue APIs the example now calls directly.)
Change-Id: I378e40aef33014f2c75c4f57531f75247d50e479
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Return value descriptions using the "@retval" tag now reflect
the fact that they appear on a separate line from the value
they are describing.
Change-Id: I3e3e347d133ad998e7db50a99369d41cbfb9efcc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The API guide now does a better job of explaining how to use
a workqueue. Also hides information about workqueue internals
and fixes several errors and omissions.
Change-Id: I6492c1c6105c258ce98365ca33059d8f32c1be41
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
The API guide now does a better job of explaining how to correctly
write these functions.
Change-Id: Ib1df55eb28fa408f3f786f122353e37505002f07
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Also adds a link to function-type API that was missing.
Change-Id: Ie671ad2f239cdca3ac1a2eb33248dfecfa251c79
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Proceed to LCD programming only if device binding succeeds.
Otherwise, dereferencing a NULL pointer will happen. This
was caught by Coverity.
Coverity-CID: 151986
Change-Id: Ibdb658f530203428aa3e53f358e0788fc1502b06
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Coverity detected some constant value in the vars, due to the
exclusive config select in the code.
Change-Id: Id27b658f3cd70dce626fef054457a9c726b3b957
CID: 151974, 151972 and 151971
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This fixes an always false evaluation of the gpio I/O direction
This issue was reported by Coverity
Coverity-CID: 151978
Change-Id: I93ec3319a3f18d564c961a5cbd9dcc9c60efbeb7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The GPIO_INT_ACTIVE_LOW value is zero so the mask assignement is
never executed. Using the bit complement GPIO_INT_ACTIVE_HIGH the
proper mask is assigned
This issue was reported by Coverity
Coverity-CID: 151966
Change-Id: Ibc7d2e4c3ebee249b5ab9719f8177cc14c0d1d33
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The bitfield determining the I/O direction already defines the pin
as either input or output, cannot be none or both at the same time
This issue was reported by Coverity
Coverity-CID: 151970
Change-Id: I18d5387139d6834004ba3269c5b54176bdc97ea7
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Stop the app from running if device binding fails. Otherwise,
dereferencing NULL pointer will happen. This was caught by
Coverity.
Coverity-CID: 151988
Change-Id: I8245d938498a51123249fbd069935900ad660314
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This commit fixes some style issues detected by checkpatch:
- Lines over 80 characters
- Comment block
Furthermore test legends are homogenized.
Change-Id: If92bbbdcf915164da945a60c8bcdbb7452ad0da0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes an issue in the test_ccm_mode.c file:
sizeof(data) is used to compute the length of the array pointed to
by the 'uint8_t *data' pointer.
At the same function scope, there is a variable (dlen) that already
specifies the required length, so we use that variable instead of
the 'sizeof' function call.
This issue was not reported by Coverity, although is worth to fix it.
Change-Id: I27cbf8c7000a4189a42d193f6445996d4b852aa6
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes the dead code issue reported by Coverity.
Coverity-CID: 151977
Change-Id: Iaa31c032456f48e1af1d1c9d722f051ac5519ccf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit fixes the dead code issue reported by Coverity.
Coverity-CID: 151975
Change-Id: I449341d1f540abe149e8ad9197a64d52cd5722cd
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
There was no check to see if the head of a list was empty before trying
to fetch the next node in the list. The fix is added to
sys_dlist_peek_next() so that it also return NULL if the node parameter
is NULL, in addition to being the tail of the list.
Since the value is not used until the second iteration of the loop, and
there will be no second iteration if the list is empty, as long as the
CPU does allow reading at address 0, this was not causing any issues.
Our ARC targets did not seem to like that.
Fixes ZEP-1263 and ZEP-1297.
Change-Id: I07ca16592d206d13662226d1249f487ee78c06aa
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
This commit replaces spaces by tabs in the TinyCrypt AES test.
Three 'space required before the open brace' issues are also
fixed by this commit.
Change-Id: I27e961484899873a25847452d569b50322dba74d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit solves some style issues found in comment blocks.
Change-Id: I1f4f7344e33b5898ac7d1fb2cd13d75946b4ee5e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit moves variable declarations at the beginning of the test
routines.
Change-Id: Id1382b64aad4130e9a939c5e51301b75c6958fe5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit removes the declaration of a data type inside the tests
3 & 4. The new data type 'struct kat_table' is declared at the
beginning of the file.
Change-Id: I7662cd164a865fe0e70f984b9b494d96b4a72af9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
NANOKERNEL is obsolete and this kernel service is still using it causing
deperecaton warnings. Move it to POST_KERNEL
Change-Id: I17fabd080645f93a8599f4ea25da844e1ec5f4bb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 608abd987c.
This change is breaking build dependencies.
Change-Id: Id8e9dbfc14b72933c402d25847615cddbfaca40d
Jira: ZEP-1291
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This fixes a string overflow past the end of a buffer
which was reported by coverity.
Coverity-CID: 152044
Change-Id: I5b331135e338fa43b5589a9488b06367e8cad5a7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: If26c881d207a6cedc52b7589c5d7ebb2040c7ab7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I92ca14b7a2c0507a86a6b6abaa567a5091622ad1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The memcmp is a comparison between two strings or buffers.
So, the length should be the buffer length, not the length
of the pointer to the buffer. This was caught by LLVM.
Jira: ZEP-1179
Change-Id: I7fd6b199686b19e7f4a2e1288897483e69ad091e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I891dc9d55055292e6a749f300e995798040d0b24
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This commit fixes a missing function return check reported by
Coverity.
Coverity-CID: 151949
Change-Id: Iedf090b7f2ded9f20ff6d796f1cd5c02990b0a4e
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I44f13131d44c7c093781e1f11f8481e7ef8175c9
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
A popular issue "format is not a string literally" was
caught by LLVM. Let's make it a string literally.
Jira: ZEP-1179
Change-Id: I2b4a5aef750b772504bf0e6f005dab2ff9ac3e7c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ifaed47b2b48359dacfdb3111ca2895d5912779e6
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The enum type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I50b68e201ef6fb18a02eeda2a2e7548dad3f358c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add function return value check. This was caught by
Coverity.
Coverity-CID: 151950
Change-Id: Iee550e15d124f05f0b0514fdad22d06c617beac2
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
There was a possible race condition when setting the return value of a
thread that is pending, from an ISR.
A kernel function causes a thread to pend, with the following series of
steps:
- disable interrupts
- move current thread to wait_q
- call _Swap
Depending if running on M3/4 or M0+, _Swap will either issue a svc #0,
or pend PendSV directly. The same problem exists in both cases.
M3/4:
__svc will:
- enable interrupts
- trigger __pendsv
M0+:
_Swap() will enable interrupts.
__pendsv will:
- save register context including PSP into the thread struct
If an interrupt occurs between interrupts being enabled them and
__pendsv saving PSP, and the ISR sets the pending thread's return value,
this will happen:
- sees the thread in a wait_q
- removes it
- makes it ready
- calls _set_thread_return_value
- _set_thread_return_value looks at the thread's saved PSP to poke
the value
In this scenario, PSP hasn't yet been updated by __pendsv so it's a
stale value from the previous context switch, resulting in unpredictable
word on the stack getting set to the return value.
There is no way to fix this issue and still have the return value being
delivered directly in the pending thread's exception stack frame, in the
M0+ case. There will always be a window between the unlocking of
interrupts and PendSV being handled. On M3/4, it could be possible with
the mix of SVC and PendSV, since the exception stack frame is created in
the __svc handler. However, because we want to keep the two
implementations as close as possible, and there were talks of moving
M3/4 to using PendSV only, to save an exception, the approach taken
solves both cases.
The approach taken is similar to the ARC and Nios2 ports, where
there is a field in the thread structure that holds the return value.
_Swap() then loads r0/a1 with that value just before returning.
Fixes ZEP-1289.
Change-Id: Iee7e06fe3f8ded84aff918fd43408c7f589344d9
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
When a thread dies, at least print the pointer to it, so we can debug
better.
Change-Id: Ief6bbc0c221e2d5271c240a4b73df16413aa5e22
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>