This patch set the EXTI line 17 as the RTC alarm pin
on the stm32f2x serie from STMicroelectronics.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
The "gccarmemb" toolchain type has been renamed to "gnuarmemb" to
better reflect the official naming.
This commit replaces all references to the "gccarmemb" toolchain type
to "gnuarmemb".
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
By using the Zephyr-native zsock_ family of types and functions, these
drivers will be decoupled from NET_SOCKETS_POSIX_NAMES.
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Test fails on this one platform, to unblock other changes, skip the test
while the issues is being looked at. This test never ran on this
platform before due to ram restrictions.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
rename boot_delay function name for clarity and change doxygen group to
be more generic and part of the init group.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove all ram restrictions in kernel tests and revisit all tests and
try to make them pass on all platforms.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Reason is that some tests have poor description in Doxygen tags,
decided to fix that situation in some tests which I understand.
Also remove small misprints from some parts of code.
Update Doxygen tags for the next tests:
test_access_kobject_without_init_access
test_thread_without_kobject_permission
test_bad_syscall
test_syscall_invalid_kobject
Signed-off-by: Maksim Masalski <maksim.masalski@intel.com>
Without this builds for qemu_x86 can't invoke k_cycle_get_32()
because z_timer_cycle_get_32() is installed with a mangled name.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add setup to utilize buildkite for CI purposes:
1. .buildkite/hooks/pre-command:
* Handles getting git checkout setup against upstream repo
* Setup some west module cache (dirs, clean out files & locks)
* init dir for ccache
2. .buildkite/hooks/post-command:
* Report disk usage (meant for possible debugging)
3. .buildkite/pipeline.yml [uses to determine what to do]:
* setup zephyr env vars
* set which docker container to use
(export some local disk caches for git, west modules, and ccache)
* uses plug to general build annotation on failure (junit-annotate)
4. .buildkite/run.sh [ buildkite wrapper to invoke scripts/ci/run.sh ]
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
* Tweak west_setup:
- log `west update` to a file to reduce noise in log
- use `west forall` + `git reset` to make sure files are checked out
(this is to handle a possible module cache)
* Output when we start sanity_check. Add a banner for when we run
sanity_check so it's a bit easier to find in console logs
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Any CoAP implementation when use at least block transfer or is a server
side need access some CoAP options as integer values. This add a method
at public interface and defines for block wise operations to avoid code
useless code duplication.
Signed-off-by: Gerson Fernando Budke <nandojve@gmail.com>
Removed flow control configuration from Kconfig and updated samples
to use device tree for that.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cleaned up flow control configuration. Added support for using only
cts or only rts.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Cleaned up flow control configuration. Added support for using only
cts or only rts.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The converted target value for remaining ticks was increased by one to
match original code, which used a one-sided test. The current test is
two-sided, so that increment is already present in the allowed 1 tick
error for boards with no slew, and incorporating it into the absolute
error can cause the test to fail.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Recommend that Kconfig symbols related to deprecated features use
'DEPRECATED' in the symbol name instead of 'LEGACY'.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As written the specification when both period and pulse are zero is
inconsistent: allowed behavior would be to drive the pin at constant
active or constant inactive, depending on which condition was checked
first.
Clarify that driving constant active level requres a non-zero pulse
equal to period.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Erase can only succeed if the address is sector-aligned, and the span
to erase is an integer multiple of the sector size. Validate this
before starting the process of erasing things.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Erase can only succeed if the address is sector-aligned, and the span
to erase is an integer multiple of the sector size. Validate this
before starting the process of erasing things.
Also reduce the check that the affected region is within the device
span to its minimal equivalent conditions.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Erase can only succeed if the address is sector-aligned, and the span
to erase is an integer multiple of the sector size. Validate this
before starting the process of erasing things.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Add two testcases,one of them verify rbtree node can be embedded
in any user struct.
And another verify some operations in logarithmic time.
Signed-off-by: Ningx Zhao <ningx.zhao@intel.com>
* Reset SHIELD_LIST on each root loop, to avoid matching
on shields from the previous iteration of the loop.
Signed-off-by: Pete Johanson <peter@peterjohanson.com>
The upload command invokes lfs_stat() on the destination file which
overflows the stack. Adding 256 bytes seems to make it work.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
The STM32L072 and STM32L073 comes with a hardware random number
generator. Add this to the device tree.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
Add the necessary clock configuration to support STM32L-based
SoCs. This change likely adds support for other STM32 SoCs as well
since the HSI48 clock is configured for all SoCs that support it
(except the STM32L4x) instead of just the STM32G4X.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
The entropy driver needs to use the SYSCFG block to control VREF on
the STM32L0. Clock the block if the entropy driver has been enabled.
Signed-off-by: Andreas Sandberg <andreas@sandberg.pp.se>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The extern array declaration of size 0 gives a warning when
compiling with GCC. Updated to use [] rather than [0].
Signed-off-by: Emil Gydesen <emil_gydesen@bose.com>
The Adafruit ItsyBitsy M4 express is a small (36 mm x 18 mm) ARM
development board with an onboard RGB LED, USB port, 2 MiB of SPI
flash, and range of I/O broken out onto 23 GPIO pins.
Signed-off-by: Michael Hope <mlhx@google.com>
This allows referencing the CPU in the board-specific DTS file.
Also fix warnings by making the addresses lower case.
Signed-off-by: Michael Hope <mlhx@google.com>
When using an IDE (e.g. Eclipse, Qt Creator), the project name gets
displayed. This greatly simplifies the navigation between projects when
having many of them open at the same time. Naming multiple projects
"NONE" defeats this functionality.
This patch tries to use sensible project names while not duplicating
too much of what is already represented in the path. This is done by
using the name of the directory the relevant CMakeLists.txt file is
stored in. To ensure unique project names, small, manual adjustments
have been done.
See also 7eabab2f5d ("samples, tests: Use semi-accurate project names")
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
The LPTIM driver is supposed to be only available when the SoC is
allowed to enter power sleep mode, as described in commit f30f5fff72
("drivers: timer: lptim is [EXPERIMENTAL] for stm32 soc series only").
For that it should depends on SYS_POWER_MANAGEMENT (which gates the
SYS_POWER_SLEEP_STATES and SYS_POWER_DEEP_SLEEP_STATES options) instead
of DEVICE_POWER_MANAGEMENT.
Fixes#25989
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
1. Shorten the long function body for test_poll_wait() to
increase readability, split it into below two method:
test_poll_wait(),
check_results().
2. Adjust annotations for below poll test cases:
test_poll_wait(),
test_poll_cancel(),
test_poll_threadstate().
Signed-off-by: YouhuaX Zhu <youhuax.zhu@intel.com>
1. Add a new testcase for defining and initializing pipes at run time.
2. Add details comments for some testcases.
Signed-off-by: Zhu YouhuaX <youhuax.zhu@intel.com>
Michael Hope
