Ensures that the microkernel's command stack has at least one element
at project configuration time, rather than at project build time.
Change-Id: I74f10bcb0d0275854801b50d5160fc85fb911250
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Using 'python' instead of 'gawk' for the 'truesize' has several advantages:
- more people understand python than gawk
- python script is easier to maintain
- lessens the number of tools on which the product depends
Change-Id: If6780b530e28867d89939e09b81b153a960004b2
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renaming the "scp" and "scs" sections to ".scp" and ".scs" respectively
signals the "truesize" tool to ignore them as they occupy neither normal ROM
nor normal RAM space.
Change-Id: Ic22013965b20d0c14e08d4d0332f2b7d028d10d9
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Similar to PACK_STRUCT it provide safe access to possible unaligned data
but it is much more convenient to use with non-struct types since all
one need to do is add a cast e.g. UNALIGNED_GET((uint16_t *) data).
Change-Id: I46402bdf1dd13081fe340a7214a84750a6cf04d2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will allow us to start adding content and structure.
To generate documentation you will need to install both
- sphinx
- breathe
go into the doc directory and run:
$ make doxy html
No content has been submitted here, only a few placeholders.
Change-Id: Ifc3617aee8f7d45fa4e4a494ff0a1ab71516af06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use scan functionality by simple app that starts LE scan
and in a while stops it.
It uses basic HCI scan interface prepared for
supporting LE central role feature.
Change-Id: Idcde4c742290d46931ab86522e51b0fc547a2d42
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
The codestyle is to use lower case for hexadecimal values.
Change-Id: I0e73cdf6d8ff4b48e6cb814f705193c65a01d14a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This changes order of Write Command definitions so it is consistent with
the opcode value.
Change-Id: Ie0eaaaec75d7b17d2da62a6c930ec56d1e666253
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The code should always warn about unkown PDUs since it could be causing
unexpected behavior or that something is missing.
Change-Id: Idc608ca221c5ff6e440f90fa24c2cd6a3e6437fc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Even one-line loops & branches should have braces.
Change-Id: Ie82e4dce1b7a2c9181f631b20d6532f1866c1197
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Unknown SMP PDUs may be a bad thing so upgrade the respective log from
debug to a warning.
Change-Id: I05072dcbedb071ff968dd9ddfb075770110b5853
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There are valid cases where we wont have handlers for unknown L2CAP
PDUS. Therefore, convert these logs from error to warnings.
Change-Id: I309b8074f9ef883ce981a4a2fbc6ab8421fda62a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The unhandled opcodes and events are not really errors since we don't
need general handlers for everything. For events its good to have a
warning but for completed commands the cmd_send_sync() API means we
don't need generic handlers for everything.
Change-Id: Ie580189f3e6d69ef10d10e6c6080d5e983c08e8e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add missing newline character to debug log.
Change-Id: Ic78ae2587d8f48b1af9754f1484350e94039f6f7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We want to be able to do fine-grained enabling of debug logs for the
various Bluetooth sub-modules. They all default to 'n' so an app
writer would need to go and enable the specific ones that they're
interested in.
Change-Id: I17105adf133d441dfc811bdd66a00be015813679
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move UART debug config option after UART driver configuration and make
it depends on it.
Change-Id: I23dc8a4a43aa6dee0bb5266cd1f84a00e811db1d
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Set the toolchain in case the user doesn't have it set in their
environment.
Change-Id: Ia961598bc125ded9326747cc8c5810635a8481d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This replaces _1 and _2 with the respective UUID size they carry.
Change-Id: I254afe335121aef23ed49a5fe0c49520937cc14f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the remaining ATT PDU definitions.
Change-Id: Id58116e00ba0d3a0ea4b0f94bd262290342e7e9f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Execute Write PDUs along with initial code to
parse them.
Change-Id: Ifa8229b9f3bf0a60d9abe553263b32397d1ba881
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Prepare Write PDUs along with initial code to
parse them.
Change-Id: Ia7210dbe4662afbebe742b5b1a7b8f08999adf2a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Signed Write Command along with initial code
to parse it.
Change-Id: I2071163c8468a6580d9a9305095187a140c80a43
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Write Command along with initial code to parse
it.
Change-Id: Ifabcfa8efb54b5135a540718fb60d9a656cd088c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Write PDUs along with initial code to parse
them.
Change-Id: I69d2002b3e6da80037c058f42f543a0ab4765958
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read by Group Type PDUs along with initial
code to parse them:
> ACL Data RX: Handle 3585 flags 0x02 dlen 11
ATT: Read By Group Type Request (0x10) len 6
Handle range: 0x0001-0xffff
Attribute group type: Primary Service (0x2800)
< ACL Data TX: Handle 3585 flags 0x00 dlen 9
ATT: Error Response (0x01) len 4
Read By Group Type Request (0x10)
Handle: 0x0001
Error: Attribute Not Found (0x0a)
Change-Id: Iebc84e7a9c405fa58b7984602d2d27f79d6033a7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read Multiple PDUs along with initial code to
parse them.
Change-Id: I34f597881e3bdb9325ffbf2bda42b7ae6710c3ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read Blob PDUs along with initial code to
parse them.
Change-Id: I5a2a2e2e32bf44d98ce928b3d57ad7f05059a927
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read PDUs along with initial code to parse
them.
Change-Id: I3ec54a0bf2394b54bd8b08957533f0826bf4a23a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Read by Type Value PDUs along with initial
code to parse them:
> ACL Data RX: Handle 3585 flags 0x02 dlen 11
ATT: Read By Type Request (0x08) len 6
Handle range: 0x0001-0xffff
Attribute type: Characteristic (0x2803)
< ACL Data TX: Handle 3585 flags 0x00 dlen 9
ATT: Error Response (0x01) len 4
Read By Type Request (0x08)
Handle: 0x0001
Error: Attribute Not Found (0x0a)
Change-Id: I0b4371b8decebf33710a949552a11c80c544b5f8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Now that we no-longer need to set an upper limit of outgoing ACL
buffers (thanks to reintroducing the ACL semaphore) we don't need to
perform a second initialization of the buffers.
Change-Id: Ie59bf7cb0e6915f1c67ca3dfb03244f9b4af94d5
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit ce981a0f51f94a3f23c43b947a2ce62a1ef08623.
Now that we're back to using an ACL buffer semaphore the rotation of
outgoing ACL packets via a pending queue is no-longer necessary.
Change-Id: I0da42992bed2abba1544b1a82c31bc71342ecf70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since nano_sema is after all able to handle multiple waiters we can
have a cleaner and more efficient implementation by using a single
semaphore for all of the connection tx fibers.
Change-Id: Iafb595ae556a2dd826502cf282b88548cb34f336
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds the defines for Find Information by Type Value PDUs along
with initial code to parse them.
Change-Id: I9eaf2df390ca6f78530df7f1ae606b588d1fcb2e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds the defines for Find Information PDUs along with initial code
to parse them.
Change-Id: If34533cca4a1a554ca3f119c7639a1167dae0ff2
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The function bt_hci_cmd_send_sync() would be used in LE SMP code for
using HCI controller for encryption.
Change-Id: I0f8f7963a0bf0597b59f24e6d21b6d1f49072f43
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add handling of SMP Pairing Request for Pairing Feature Exchange. In
the beginning support Just Works pairing method.
Change-Id: I8aab10683e9f26db4e0e9cb1bb9a8dc8940f0ab0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Instead of magic number use sizeof().
Change-Id: I6c9db3d7a371312d0aab4fd7dc6a9d0c92449afc
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Enabling HCI_CORE debug helps to identify possible bugs.
Change-Id: I13df39d63ee9b15f83503d86edc71733c7db94d5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Allowing to redefine QEMU_EXTRA_FLAGS helps to overcome user channel
stuck cases, you still have the possibility to use bluetooth over tcp
by specifying QEMU_EXTRA_FLAGS="-serial tcp:...". Default behavior
remains the same though.
Change-Id: I3a8190a1ca04029e788bfd424f3b3a3be9f2af75
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
For debugging buffer access related issues it's convenient to be able
to enable logs and extra checks specifically for the buffer related
code.
Change-Id: Ibb87d344809d2bcada10a22b16a23e6556f4ae79
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Bluetooth regression and system regression would run compile test
for shell app.
Change-Id: I029772483e7aa9ac0717db760d8de1f6be3371b5
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support for nanokernel build for shell application.
Change-Id: Idf5f3673050c2ac4c941dc9164536fc487e9216b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove old way of starting qemu target and add extra information.
Change-Id: I37c378aa0eb873b3fc16362991eec8a6b661626b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add bt_smp_create_pdu() helper and implement send_err_rsp for an
unknown SMP command.
Change-Id: Iaed0811f3323f62aaa56eb531fb383cf15396ef8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
