This patch adds a configure_mpu_user_context API and implements
the required function placeholders in the NXP and ARM MPU files.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Add the STM32 ccm_bss, ccm_noinit, abd ccm_data sections
to the list of allowed sections so the sanity check passes.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Configure ccm size and address via dts. According to the DT
specification, the unit-address of a node must match the
first address specified in the reg property of the node.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
The STM32 has special Core Coupled Memory, ccm for short, that can
only be accessed through the CPU and can not be use for DMA.
The following 3 sections have been added.
- ccm_bss for zero initialized data
- ccm_data for initialized data
- ccm_noinit for uninitialized data
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
Allow for any toolchain variants to be useable with sanitycheck without
the need for them to be registered.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move toolchain definitions into toolchain/ and move compilers to
compilers/
Usage of toolchain- for everything was confusing, there are the actual
compiler related definitions and there is the toolchain/SDK related
configs, so keeping them separate helps understand the different and
prevents confusion.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
We want to support other toolchain not based on GCC, so the variable is
confusing, use ZEPHYR_TOOLCHAIN_VARIANT instead.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When we added system call support to dma_start/dma_stop we forgot to
include <syscalls/dma.h> to get the full proper magic implemented.
Adding the header in fixes builds when system call support is not
enabled and using dma support.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Difference being that the data is not, then, allocated from the pool.
Only the net_buf is.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
bt_gatt_discover_params parameter shall remain valid as long as the
procedure is in place.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The conversion to the new net_buf_simple API was done incorrectly
here. The buffer initialization should use net_buf_simple_init()
instead of net_buf_simple_reset(), so that buf->__buf gets properly
initialized (and not left pointing at NULL).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's a risk of a deadlock if we use the same pool for ACL fragments
as we use for general ACL TX buffers: all TX buffers are queued up,
and we try to segment one of them, a segment buffer will never become
available. To work around this risk, introduce a dedicated fragment
pool.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Refactor ticker execution context dependency out into HAL
folder. This decouples ticker from mayfly, enabling porting
towards a more tasklet (if and when kernel gets the support)
style execution contexts type implementation support.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Convert the mesh code to use the new net_buf_siple APIs. This has the
benefit of saving 4 bytes off the stack due to the not needed pointer.
Also update the publication context helpers to map to the new
net_buf_simple API in an intuitive way.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If context is bound to IPv6 unspecified addresss and some port
number, then unspecified address is passed in TCP reset packet
message preparation. Eventually packet dropped at the peer.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Zephyr doesn't have luxury to create re-transmit timer per packet. So
it has different methods to handle packets in queue. But re-sending
packets on valid ack messages causing issues.
E.g. A TCP node sent two packets (packet-1, packet-2). Peer replied
two ACKs (ACK-1 and ACK-2), and these two ACK's are at rx_thread
queue. Now ACK-1 is handled and reference of packet-1 is freed
from sent list. Then if condiftion (valid ACK and connection
state is ESTABLISHED) notices that, sent list is not empty.
Restart the timer, modify sent flag and resend packets in a
list. Here packet-2 is sent again, even though ACK-2 is already
received. Situation is worse if there are more packets in the
list.
So only start the re-transmit timer in-case queue is not empty. It
allows rx_thread to handle all incoming packets (in this e.g ACKs).
When the re-trasmit timer expires, it sends the packets which
are left in queue.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of failed to get source address from the net packet,
release the assgined tcp backlog entry. Otherwise it will
never be freed.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
k_delayed_work_cancel(&context->tcp->fin_timer) called twice
immediately one after other.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Application should normally declare a bt_uuid with proper type and then
use bt_uuid_cmp.
Fixes#5162
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
RFC 7252, sec 4.8 [https://tools.ietf.org/html/rfc7252#section-4.8]
The default MAX_RETRANSMIT is 4, current implementation only
retry 3 times. Update next_timeout() to return one more retry.
Also, add a TODO for random generated initial ACK timeout
Signed-off-by: Robert Chou <robert.ch.chou@acer.com>
Two docs listed in the Samples an Demos TOC had the same title displayed
in the board-specific samples section, "Power Management Demo". Give
both sample docs a more specific title.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The existing implementation assumed DNS resolv callback will be
called just once, but that's not always the case (apparently,
for multi-homes hosts or something). So, apply array bounds
checking (and do pointer arithmetic only after it, as the C
standard otherwise warns of "undefined behavior"). In such a case,
the port number wasn't set in each entry too, so rework how it's
done.
The issues discovered while resolving archive.ubuntu.com.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As per current policy of requiring supervisor mode to register
callbacks, dma_config() is omitted.
A note added about checking the channel ID for start/stop, current
implementations already do this but best make it explicitly
documented.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a new zephyr-env.cmd that mirrors the functionality of zephyr-env.sh
but on Windows platforms. It sets ZEPHYR_BASE to the location of the
script.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
During compile of lwm2m_client using qemu_x86, the following build
warning was noticed:
zephyr/arch/x86/core/excstub.S:132:2: warning: "/*" within comment [-Wcomment]
/*
In commit ff42bdd0a0 ("debug: remove option GDB_INFO"), the comment tag
was omitted. Fix the comment end tag.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This feature is X86 only and is not used or being tested. It is legacy
feature and no one can prove it actually works. Remove it until we have
proper documentation and samples and multi architecture support.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correct 2 items in the Windows Getting Started doc:
* dtc-msys2 is now an upstream Chocolatey package
* Add instructions to clone and build Ninja for MSYS2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This patch updates information pertaining to userspace related security
features. Some of these have been added to releases and this needs to
be shown in the document.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
stm32f334 is not an expansion of stm32f303, since
stm32f303 has more I2C, SPI ports than stm32f303.
Fix this by including stm32f3.dtsi in stm32f334.dtsi.
Signed-off-by: Yannis Damigos <giannis.damigos@gmail.com>
It is important that it is easy to reproduce CI issues locally. Using
the same sanitycheck options locally and in CI helps in this
regard. Specifically, Ninja and Make can produce different results and
therefore the default generator should be the same for sanitycheck and
shippable.
This patch makes four changes:
The sanitycheck option '--make' is introduced to allow specifying Make
as a generator.
CI no longer passes the option '--ninja' to sanitycheck.
Sanitycheck defaults to using Ninja.
Sanitycheck documents the --ninja option as deprecated.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
New advertising started while scanning is already enabled
would delay the first advertisement event until the end of
the current overlapping scan window in the Zephyr native BLE
controller implementation. Hence, consider this scan window
duration when calculating the advertising stop.
Relates to: #6083
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix, add the missing code for the removal of any accumulated
soft latencies or negative drift ticks when scheduling next
interval expiry with added laziness.
Typically a first interval would accumulate soft latencies
and this has to be removed if the interval is rescheduled
with any added laziness (scheduled to the next soft real
time interval).
Example, scan windows block any new scheduling until the end
of the window, adding latencies to any soft real time ticker
expiry which should try to execute as early as possible after
the scan window.
Fixes: #6083
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Refactor BT_CTLR_ADV_INDICATION feature by moving the
implementation closer to the implementation that is closing
the advertisement event so that in the future new members
can be added as necessary (example, advertised channels).
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
No one was setting this to any other value than its default, which
happens to be the same as BT_BUF_USER_DATA_MIN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since all in-tree users are good with 4 bytes of user data, reduce the
default to 4. Also fix the default and rage values where apparently
'0' and '8' had been swapped.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The HCI command buffers are the only ones with more than 4 bytes of
required user data. Move the user data into a separate array and do
the mapping with the help of net_buf_id(). After this, it will be
possible to reduce the default net_buf user data size from 8 to 4.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Fix incorrect radio timing for Tx chain delay for S2 and S8
coding. Regression introduced in commit 55d3ce111c
("Bluetooth: controller: Refactoring nRF5 radio driver").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Having these in the beginning of a switch statement without any case
statement makes no sense.
Fixes#6135
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When generating coverage report:
* Also generate branch coverage
* If the report is properly generated tell user where to find it
* Handle case in which no ztests are run (it would crash before)
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
