This implements LE SC f6 function use to calculate DH Key checks
values. Calculated value is compared to value received from remote
party and if match encryption is enabled.
Change-Id: Iee66cbd19c0aa6d83edc6482dfb87943e4e45069
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
When remote Public Key is received issue HCI command to calculate
DH Key.
Change-Id: I46ce03d6a8aafebaad2656ccf66cbb636ceb748a
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This run smp_f5 function with test vectors from Core Specification 4.2.
Change-Id: I1ef0ddf54c058bd7a9b7cc635fd785267a1bafd8
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This implementes f5 function and use it to generate LTK and
MacKey.
Change-Id: I86d9a958d5009796ea04f2447e1bad9eb63981ce
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This run smp_f4 function with test vectors from Core Specification 4.2.
Change-Id: If083d8c9c81b98af97ed900db2004482b3e886e3
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds initial pieces for LE SC support including pairing method
selection, authentication field updates, confirmation generation and
public key sending.
Change-Id: I91dcd0058c8f45ea19df89c2336142d927b08235
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This is needed for LE Secure Connection when tinycrypt is not used.
Change-Id: Ia0419da882d48d9d298b6674803b2e4987e6aa0c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
We don't use "Bluetooth Smart" anywhere, so we shouldn't use
"Bluetooth Classic" either. Instead, stick to the more technical "LE"
and "BR/EDR" terms.
Change-Id: Iadfc1c090205e0f417081d63ebe43172c5708a18
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
IUT shall response with Invalid Offset ATT error code, if it exceeds
value length.
Change-Id: I5c7148c96324482f198332d475742bfb44274957
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Indicate to the user that the debug support is no longer LE-specific
but generic for Bluetooth subsystem.
Change-Id: I1a1c39fd03bf857ba673fbb5d15fa50ffba02afa
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
This allows to store LE SC keys. Since LE SC and legacy
pairing are mutually exlusive there is no need for additional
storage space as keys.ltk can be used for it.
Change-Id: I784e670684e9047b4b90b8cb8505d9b581c47b50
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The least significant bit of opcode is not used to distinguish between
command/response or events.
Change-Id: Icaa1b6d87968e095a7f231d43e74257f5acca379
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Add configuration files for new platform and adapt options
of the benchmarks for those platforms.
Change-Id: I7c5011966c3a99f0b1c2c3fc44ba05b67ac6f953
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test requires a huge stack and wont fit on Quark SE.
Generated binary is too large due to a large stack size defined.
Change-Id: I3446d614a58db1ab78941799ee41e898368db3b5
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This sample depends on functions that are not available in
the MVIC driver.
Disabling while we wait for those to be implemented.
Change-Id: Icd03ef014cbcd890945c0e77e349cccfded62e22
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This will allow tests to be built for this platform.
Change-Id: I2275ec71af6cdb6f71c131fa26c5eae2d91c2475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
The Intel Quark microcontroller D2000, is a low power, battery-operated,
32-bit microcontroller. Within its small footprint, the Intel Quark
microcontroller D2000 includes an Intel Quark ultra-low-power core
running at 32 MHz, with 32k integrated flash and 8k OTP SRAM.
Change-Id: I6ba121996edb0b5fbe596bd6ef3d6e3979ff73e9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This module is based on the standard Local APIC and IO APIC source modules.
This modules combines these modules into one source module that exports the
same APIs defined by the Local APIC and IO APIC header modules. These
routine have been adapted for the Quark D2000 Interrupt Controller which has
a cutdown implementation of the Local APIC & IO APIC register sets.
Change-Id: Ic80aa78918483663d76054ebadefa08d8a3f188a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Adds the register definition for the DW GPIO hardware block.
This set of registers and offsets are specific for the SS
GPIO hardware block in the Quark SE platform.
In particular, the register BOTHEDGE (offset 0x68 in the
main GPIO block) does not exist on the SS GPIO block.
Change-Id: I4e16ec7c8e89015be1fc8bcdb1b7fa5377890b9d
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This adds the I2C driver for the Sensor Subsystem on Quark SE.
This provides minimal support for the I2C controller, and does
only synchronous transfer at the moment.
Change-Id: I400b8ff3390d4b641bed5b8c617830c4217de3ff
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Force setting the value in the platform kconfig instead of defaulting
to 0.
Change-Id: Iceeb6346afc4217dd09d31c28898e3693b08f781
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This cause problems with some configurations using hex.
Change-Id: I680c40d46e1fdf3da714f6412c8dda0e1ebb44f9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Keep things consistent across all platforms and make this
configurable and avoid hardcoding in linker.cmd file.
Change-Id: Iddeb5107854139249fda70378e07b83066d8a7a1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the Synopsys source code for the arc ADC driver.
Change-Id: I140a63505685cda8ec9d3174b7cf4fc1e2e91b06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This adds the driver to support DesignWare AIO/Comparator
under drivers/aio.
Change-Id: Id6cb1b507c0526098f163f74c188e990590797c2
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Such controller is found on Quark SE Lakemont and ARC cores. This
driver currently supports the Lakemont core (x86).
Change-Id: Iefebd6ce9dbe81aa3902e7c2d801b07c027c548a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Implements a low-level IPI driver for Quark SE mailboxes.
Configures the Quark SE platform to initialize it and
configure an IPI console from ARC->LMT on channel 4.
Change-Id: I30123771d04c2e06ea6fcca585fd4ef74c0717a7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These should now work for drivers written for other arches.
Still a hack to do all the IRQ setup at runtime.
Change-Id: I9717f74abef3b9934f9a1c0acbd76d960ed7a3cb
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Quark SE provides various clock controllers through its SCSS block.
Peripheral, external, sensor, and others.
This current drivers provides only the clock gating capability, for
peripheral, external and sensor. But it could support divider and more
other features once defined in the generic API.
Note: such clock has _nothing_ to do with a Real Time Clock (RTC).
An RTC provide clock timing like a watch would do. Here the clock
controller is about circuit clocking.
Change-Id: I1a365ae730dfc6be7686271f7fbb693e64a6ff6f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding DW real time clock support. This driver is used by the Quark SE
and Quark D2000 SoCs.
Change-Id: Iba8ddee1b1b5fee298db95b63418e152774662a4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver should handle the initialization instead of relying on
platform initialization. This is to conform to the driver model.
Change-Id: Idc95d59bce2470b5118e416ee05f07548991a15c
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
When PCI bus is not enumerated, I/O memory and IRQ
numbers need to be statically initialized.
Change-Id: I4efcccd95d8048910f6c900c8daf46cbe3a5fa00
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Prevents unnecessary features from bloating the size of the galileo's
minimal footprint benchmark project.
Change-Id: Ie689a2c6fe1409904c43ec9a24a0efc01e768e4c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The new flags parameter needs some documentation.
Change-Id: I24dc9df62323957bb4b294adf27487df3f76ea01
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
task_event_handler_set() only does event ID validation using __ASSERT(),
which cannot be easily tested automatically.
Change-Id: I060e3aa5b31f0a312e328e89db6f20cd800e9c5d
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
