Implements interrupt driven UART for the serial driver.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Signed-off-by: Justin Watson <jwatson5@gmail.com>
The spi nodes should have #address-cells and #size-cells properties much
like i2c does. Add these missing properties.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move common SoC dts.fixup defines into
arch/arm/soc/ti_simplelink/<BAR>/dts.fixup so we remove duplication in
the boards and only have board specific defines in
boards/arm/<FOO>/dts.fixup.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There are some minor differences between the UART om SAMD20 and SAMD21
that we need to take into account:
SYNCBUSY bit for the samd20 is located in the STATUS reg.
The samd20 does not have a SAMPR bit like the samd21.
Signed-off-by: Sean Nyekjaer <sean@nyekjaer.dk>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When we determine the address and size cells to determine how to parse a
reg property, we need to stop at the parent of the node, not at the node
itself. If we have #address-cells or #size-cells in a node its meant
for the children of that node and not the node itself.
Fixes#4568
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Pool size is no longer available so it is no use trying to print
its value. This change was introduced in commit dd09cbc1c4
("net: buf: Redesigned API with split data and meta-data")
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The attributes are an u32_t only on ARM and ARC; on x86, it's something
else entirely. Use the proper type to avoid attributes being
truncated.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Hide all symbols whose names begin with an underscore. Although these
might be documented, they shouldn't be used by applications, as there's
no guarantee they will be available in subsequent versions, or maintain
API and ABI compatibility.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Include `soc.h` first, which will include the ESP-IDF headers -- which
will define the `BIT()` macro without checking if they're already
defined, like the Zephyr headers do.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
The Simple Management Protocol (SMP) is a basic protocol that sits on
top of mcumgr's mgmt layer. This commit adds the functionality needed
to hook into mcumgr's SMP layer.
More information about SMP can be found at:
`ext/lib/mgmt/mcumgr/smp/include/smp/smp.h`.
Signed-off-by: Christopher Collins <ccollins@apache.org>
Exposes the operation that MCUboot will perform on the next reboot
(e.g., stay on current image, swap to alternate image, etc.).
Signed-off-by: Christopher Collins <ccollins@apache.org>
The goal of mcumgr is to define a common management infrastructure with
pluggable transport and encoding components. In addition, mcumgr
provides definitions and handlers for some core commands: e.g., image
management, file system management, and OS managment.
Origin: mcumgr
License: Apache 2.0
URL: https://github.com/apache/mynewt-mcumgr
commit: 59210e372c927e26637696f2198ff2efe8ea6897
Purpose: Introduction of mcumgr
Maintained-by: External
Signed-off-by: Christopher Collins <ccollins@apache.org>
Current configuration was choosen to avoid colliding with existing ones
for i2c and uart, but others can be used.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Current configuration was choosen to avoid colliding with existing ones
for i2c and uart, but others can be used (see
drivers/pinmux/stm32/stm32_f0.h)
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As per TSE 10009 the TS will enforce that a Friend ever only uses a
single transmission when sending packets to an LPN. Make sure that our
implementation follows this.
https://www.bluetooth.org/tse/errata_view.cfm?errata_id=10009
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This commit fixes the crash of echo_server from overflow in ICMPv6 NS
source link-layer address option.
Fixes#6235
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Configure SPI using DT for the following STM32 boards:
96b_neonkey
nucleo_f091rc
nucleo_f334r8
nucleo_f401re
nucleo_l432kc
nucleo_l476rg
SPI nodes in <board>.dts file are populated matching boards existing
pinmux default configuration and enabled in Kconfig.defconfig if
SPI is enabled.
For nucleo_l476rg board SPI2 and SPI3 nodes are not yet added, because
of missing pinmux defines.
Fixes#5836
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Add SPI fixup defines on STM32 SoC family level for all SPIs that
are supported on one or more SOCs of that SoC family.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Most STM32F429 SoCs have 6 SPIs, but STM32F429Vx SoCs only have
4 SPIs. This is one of the rare conditions where device-tree
directive /delete-node/ should be used.
Add spi5 and spi6 node to stm32f429.dtsi. Create file
stm32f429vX.dtsi to delete those nodes and document usage of
/delete-node/ directive.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Some stm32f4 SoCs don't support spi2, so remove spi2
device-tree node from stm32f4.dtsi file.
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
stm32f405 is not an expansion of stm32f411, since stm32f411 has more
SPIs than stm32f405.
Fix this by including stm32f401.dtsi in stm32f405.dtsi
(instead of stm32f411.dtsi).
Signed-off-by: Daniel Wagenknecht <wagenknecht.daniel@gmail.com>
Use RADIO_TIES_US to define minimum inter event space
between concurrent master and slave roles below which it
will be detected as a probable drift towards each other
leading to them overlapping on each other.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If we could not send the packet, then do not release the net_pkt
as that will be released in net_if.c:net_if_tx() if driver send()
fails.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When IPv6 and IPv4 both are enabled and net_app acting as a client,
configuring local context has one glitch.
After selection of IPv6 context as a default context function
should return immediately, otherwise it continue to select IPv4
context as default context.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
In case of TCP and node acting as a APP_SERVER it can have multiple
concurrent connections. Calling close callback when there are still
active connections exists, causing an issue.
e.g. When a node acting as a HTTP server and can support multiple
TCP connections. Let's say one of the connection is in closing
state and the rest are still in active state. net_app_ctx is
calling close (http_closed) callback of registered upper layers.
HTTP assumes all the connections are closed and unref all the
connection related stuff.
Call the close callback only when there are no active connections.
Patch has also moved TCP stuff under one #ifdef.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Create a net sample to setup a multi-node RPL mesh network using QMEU.
To enable this, it was necessary implement a hw filter on IEEE 802.15.4
UART Pipe driver and create a QEMU pipe management on cmake.
This sample use a tool developed on zephyr net-tools repository called
virtual-hub.
Signed-off-by: Pedro Martucci <pedropaulomartucci@gmail.com>
Instead of having K_FOREVER when allocating a packet in IPv4 ARP
and IPv6 ND, set a timeout so that we do not have a case where we
would wait net_buf forever.
Fixes#5484
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPSP channel is disconnected call net_if_carrier_down instead of
net_if_down since the later may still attempt to send packets while the
former just discard them immediatelly.
Fixes#5317
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This introduces net_if_carrier_down so the L2 driver can inform when it
has lost connectivity so all packets shall be flushed and the interface
should be put down.
Fixes#5317
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
