This fix not being able to stop advertising while connected due to
invalid use of BT_DEV_ADVERTISING flag.
Change-Id: If5578fa2c69dd18d6623d05ae44d4710cce9a9e5
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
The 100ms wait was too short. After some debugging, the
packets were successfully sent after 250ms wait.
Change-Id: Ib367f8df81ed3039b041f1e7b46d8f562a0adcac
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the reply for a sent message is not received, then try
to send it once again. If the second resend fails, then mark
the packet as failed.
Change-Id: Ibe9b9384e2e84f055c6486a5bd4d7293675e5d42
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to test unicast sending properly, disable multicast
sending temporarily.
Change-Id: If90acf003910a954770caa53825116d2a9ddadc1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
BT_DBG already add a new line so that '/n' is not necessary.
Change-Id: I7b25470386e2a7228a684665301d2d28d1360808
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Table updated with examples column to eliminate Latin prefixes (e.g.) and
to enhance readability.
W/S fixed
Change-Id: Ia92e2d5454e816595e054cb44caa56364f9dc1b3
Signed-off-by: L.S. Cook <leonax.cook@intel.com>
Breaking out the documentation on setting up a Linux Foundation account to
it's own section. This isn't needed for the getting started process, and is
only needed if someone decides to start contributing code.
Change-Id: I112b65a53b167927d2617aef7364c13f30f74c33
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The current doc structure requires the creation of a Linux Foundation
account, which is not really a valid open source usage model. In fact,
it isn't even required to download anything as anonymous git clone works.
Content on creating a Linux Foundation ID will be moved to the
collaboration section in another commit.
Change-Id: I50253d7b3da85b64986d62f2e5bee25da3eb3987
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This debug option enables debug of Nordic RPC.
Change-Id: I2e963f10ed6407b836e1572673244cb0187227d2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use NBLE_DEBUG_GAP to enabled / disable GAP NBLE
debug.
Change-Id: Iefbb18e697d523137a101df00b02d46e209e7f14
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Makes shell output readable by disabling extensive debug from UART
driver.
Change-Id: Ic8df252c8ca4abd6b021db11d266f4db80df4b09
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Bluetooth links are point to point so it shouldn't be necessary to do
neighbor discovery, futhermore it blocks transmission if the remote
doesn't respond which seems to be the case with Linux.
Change-Id: Ic8997f9c5bc832ba71f71e20e6317ee0c79d250d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement Bluetooth LE scan start/stop API for Nordic.
Change-Id: I3dc153346d0135501091a4b952a3c60c081802db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
If other peers were present but not in CONNECTED state temporary
connection reference was leaked.
Change-Id: Icc32bfe1a86f92a9d8472991476ebfd26c889d84
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This make it possible to include IPSP services in other samples.
Change-Id: If6eaecd8bab85a382b2da623b06603f6c98aef59
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Implement bt_conn_create_le() and copy bt_le_conn_params_valid() from
net/bluetooth.
Change-Id: I6b3fff5027a82b8040c0c724eac1251945415f43
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Channel context was cleared before calling bt_gatt_disconnected
which resulted in passing NULL conn to it.
Change-Id: I486d1cf6662716584c2c973366a9c9654f499802
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds Implementation Conformance Statement (ICS) for L2CAP layer
with currently supported features.
Change-Id: Ie15d2936877edb674e20283b12a50487df5cdc02
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This adds CSC Service related UUID definitions.
Change-Id: I3fc77cd6561ccfd7de0d906c7ddcd5d8dac5bff9
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Structure has changed in firmware headers.
Change-Id: I0df1549ce5353a2c7807f7839ee9270e833fbbf2
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Make device APIs a group to enable in raw doxygen output and group
all IO drivers into one category.
Change-Id: I1f9338d3b977bd08a6a1b8d8b396ce1fba33aada
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
During endup pairing as acceptor update security level and link encryption
state on connection complete event.
Change-Id: I6189a3c6675c080e3ab2610c81b617294dbd98d5
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
To skip around forward declaration in next security update patch,
move up part of strictly BR/EDR related code.
Change-Id: Id44fc831f629e66660edbc43c187cbf9a88b771d
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
When during legacy incoming pairing (as acceptor) the runtime is passed to user
to enter a PIN, mark such interaction and keep it valid until proper
authentication reply API handlers are called.
Change-Id: If63015f5beb256873925602adc6a8e5ff9d3b00f
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
As a pairing acceptor starts tracking 16 octets PIN entered by user
when pairing devices working in Security Mode 3. Based on PIN tracker
state, the generated link key is saved in keys database as combination of
un/authenticated and legacy key type.
Change-Id: I4cbb20942fb38697d952971df807aec8b16c74e4
Signed-off-by: Arkadiusz Lichwa <arkadiusz.lichwa@tieto.com>
Update the advertising data to advertise the Zephyr project web site.
Also provide references to the Eddystone specification.
Change-Id: Id9cfdf4d9be95bccab4152031479ab45f5b8a035
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This removes HR Control Point from Heart Rate Service Declaration.
This characterisitc is mandatory if the Energy Expended feature is
supported, otherwise excluded. Since we don't simulate Energy Expended
we shouldn't have this characterisitc in our service declaration.
Change-Id: Ibdfdb2dd48f28bd01763ee0a038faed08e30f84c
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
To exclude platform platform_exclude=foo should be used and not
platform_whitelist=!foo.
Change-Id: I4cddcd3b73e0bd8c42a0726776f8237ebd79a6ae
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Remove empty function declaration using weak autogenerated method.
This solves API to NBLE constantly changing problem.
Change-Id: I2ff90559dfbf78e9c34e602195d8a76ab9750a47
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use common config for tests and use testcase.ini for defining micro
and nano kernel variants.
Change-Id: I47453cd49696dd496cc728cc1eb2eba9cf7f1c6c
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This adds Environmental Sensing Service related UUID definitions.
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
Change-Id: Idd87139971fb3c992b7fb7e346ce2ea90553ad38
The bt_conn_get_info() API also needs the local address. For now
simply use an extern declaration to get access to the variable that
resides in gap.c.
Change-Id: I3ddb598785cfb6a5d07fc10621f6d20a610536be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_conn_get_info() API requires that we track the role and the
various connection parameters.
Change-Id: I732eace1e45173f94962df3f11dbe5ad520a75cf
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Instead of return 0 if there is an error, return
a value < 0 so that caller caller of cc2520_read()
can reject packet right away.
Change-Id: I99808db6aa692cf4415f630193d35e51d4bc3144
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
